Installed Firefox on new MacBook Pro. "drag firefox into applications" window opens every time Firefox opens and also have to eject disk everytime close Firefox. How to make this not happen?

Installed Firefox, dragged icon into applications folder, Firefox disk icon on desktop while Firefox is open. After closing Firefox, have to eject disk every time. After opening Firefox "drag Firefox icon into applications folder" keeps appearing every time, even though already done. How to get rid of this? Thanks in advance!

Can you check this issue on Firefox 9?
* getfirefox.com

Similar Messages

  • I uses Time Machine to transfer files and program from old to new MacBook Pro. Aperture doesn't work. Every time I open Aperture the computer need me to key in Serial number. How do I fix it.

    Hi There,
    I purchased a new MacBook Pro Retina 15". Since I am using MacBook Pro and I uses Time Machine for backup files and program. Store saleman tell me I can retore my existing program and files from old MacBook Pro to new MacBook Pro computer. After files transfer it seem to be OK. But only Aperture has a problem when every time I open Aperture to edit photos, MacBook Pro ask me to key in the Aperture Serial Number that made me so inconvinent. Did any one have meet this problem and can someone teach me how to fix it, Thanks.
    Nelson

    Either the license files were not transferred or it has to be relicensed.
    Remove and then re-install aperture. On an rMBP this should take only a couple of minutes.

  • Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

    Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

    In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
    Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
    I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
    Having 2 versions of ACR will cause problems.
    You have already downloaded DNG Converter 8.7.1.
    Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
    Be aware that DNG converter is a stand-along application and not a plug-in.
    You need to open DNG converter at select the FOLDER that contain your .NEF files.
    Don't open the folder and try to select individual files, it doesn't work that way.
    After converting your D810 files to DNGs you can then open the DNGs in CS5
    The problem is your camera didn't exist when CS5 & its version of ACR was developed.
    i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

  • HT4796 Can Windows 7 be installed on my new MacBook Pro, through my network connection?  The disc would be in my Windows desktop.

    Can Windows 7 be installed on my new MacBook Pro, through my network connection?  The disc would be in my Windows desktop.

    I wouldn't recommend installing through a network connection.
    For a Virtual Machine:
    If you have the Win 7 media (DVD), use an app like PowerISO or MagicISO to make an ISO file of the install disc and use that.
    For BootCamp:
    Use the original install media and BootCamp Assistant, to install from your DVD Drive.

  • Leopard Install on Brand New MacBook Pro?

    Hey guy's, I got my first Mac today. A lovely brand new Macbook Pro. I got a copy of Leopard in the box and have run an upgrade.
    Was this right? As the computer is new with nothing on it and I have nothing to import of another Mac onto it should I just do a complete erase and install?
    What's the best option?

    wow thanks for the very fast reply! I'll stick with it then and see how it goes. I love the thing though. It's very sexy!! Bit peed that they bumped the 7200rpm drive up to 200GB today but never mind, not fussed by the CPU as it'll only use the battery more and this thing is fast enough!
    Will the upgrade convert all the OS into the full 64bit?

  • How do I block a popup window that I have allowed to open on Firefox once? I now have the popup blocker set to block all sites, but the popup still opens every time I open Firefox or open (sometimes) a new tab.

    How do I block a popup? I allowed this popup to open once. Now I have set the popup blocker to block all sites but this popup still opens every time I open Firefox and sometimes (usually) when I open a new tab.
    I Have stopped and restarted Firefox multiple times.
    I have rebooted the computer.
    I have set the tools/options/content/block pop-up windows/exceptions to block all sites (no exceptions).
    I have no other issues with Firefox.
    I have Adblock plus (with (1) subscription) installed
    I am currently using Firefox version 4.0 on Windows7 Ultimate.

    Just to address the last point: check your History menu to see whether you have the Restore Previous Session option and use that if you can. If that is grayed out or doesn't restore everything, check the Recently Closed Windows and Recently Closed Tabs lists for other pages.
    The unwanted window may be generated by an add-on. Try disabling ALL nonessential or unrecognized extensions on the Add-ons page. Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, if in doubt, disable.
    Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Any improvement?
    Here are some other things to check:
    (1) user.js file that changes Firefox startup behavior and overrides your preferences. This article describes how to track that down and delete it if you have one: [[How to fix preferences that won't save]].
    (2) Possible hijacked shortcut. Check the "target" of the desktop icon you use to start Firefox to see whether it lists the unwanted page. To do that:
    right-click the icon > Properties > Shortcut tab
    For 64-bit Windows 7, the Target should be no more and no less than this:
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
    (3) Possible undisclosed bundle items. If you have installed any free software recently, check your Windows Control Panel, Uninstall a program for surprises. If you click the "Installed on" column head to group by date, it is easier to spot bundled junk. Remove everything suspicious or unrecognized.
    (4) Supplemental clean up scans. Our support article lists tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
    Hopefully that cures it.

  • When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it

    When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
    I have been playing whole movies before from VLC without problems.
    Any Ideas?

    Welcome to the Apple Community.
    Yes it's network issues or settings that cause these types of problems most of the time.
    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • Hi! hooked up my new macbook pro to my LGE2442 monitor using a MDP to HDTV cable and the monitor resolution is terrible. suggestions? thanks!

    hi! hooked up my new macbook pro to my LGE2442 monitor using a MDP to HDTV cable and the monitor resolution is terrible. suggestions? thanks!

    thanks, guys mirror on/off didn't make a difference and there were no resolution options with the cable. switched to a VGA adaptor and all is working great now! cheers

  • In windows 7, firefox 4.0.1, How do you close tabs so they don't open every time I open firefox?

    Can't close tabs so they don't open every time I open Firefox.

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    *http://kb.mozillazine.org/Session_Restore
    *http://kb.mozillazine.org/sessionstore.js
    *http://kb.mozillazine.org/Multiple_profile_files_created

  • My macbook Pro 13'' keys aren't working (The Esc, F1 to F12 and also the Eject Key doesn't work and so I'm unable to change the varied special features those keys offer.)  Please help what do i do? Because i've gone through all the support options :(

    My macbook Pro 13'' is giving me trouble
    The Esc, F1 to F12 and also the Eject Key doesn't work and so I'm unable to change the varied special features those keys offer.
    Please help what do i do?
    Bceause i've gone through all the support options

    Hi Kash_xo,
    If you are having an issue with some of the keys on your MacBook Pro's internal keyboard not functioning as expected, I would suggest that you troubleshoot using the steps in this article - 
    OS X Mavericks: If keys on your keyboard don’t work
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance

    Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance

    You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
    So the first piece of advice is to make sure you have a back up of everything.
    You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
    Here's the link for the US.  http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    As for MS Office, you will need the original disk that it came on to reinstall it.

  • Can't do a fresh install on my new MacBook Pro

    I just got a new MacBook Pro and after setting it up, transferring no files, I decide that I actually would have liked to restore Leopard from my Time Machine back up. I try to do this via the Migration Assistant, but it's not working properly and it's taking up way more space on my HD than it should.
    So I decide to try and reinstall Leopard and start over. Only I can't. When I insert the Leopard installation DVD and double click on "Install Leopard", it restarts, but it's just stuck on a grey screen. If I hold down alt while booting I'm asked to choice between my Macintosh HD and the installation DVD, but when I choose the DVD, it starts spinning, but stops after a while and the computer is frozen. I can't delete what's on my HD from Disk Utility either.
    How do I get rid of what's on my HD and get a chance to install a fresh Leopard?
    This is driving me crazy, hope you can help me!
    Thanks

    Thanks a lot both. The thing was that I couldn't find any DVDs that belonged to my new computer, so I just used my old Leopard DVD thinking that it didn't matter which one I used anyway. When you said it did
    matter, however, I looked a little closer and found two DVDs in my new computer's box. I'm doing a clean installation as we speak.
    Thank you for your help!

  • How do I install on my new macbook pro retina without a cd drive?

    I got Photoshop Elements 10 for Christmas and now I just finally got my new Macbook Pro retina that doesn't have a cd/dvd drive so now I don't know how to install it?? Help please!!

    Either Copy the content of the DVD on a USB drive and then install or Download the trial from Adobe.com website and use the serial number on the Box to serialize it.

  • How to do clean install lion on new macbook pro?

    I have a new macbook pro...I want to do a clean install on a new hard drive...but when I goto the app store it shows lion app available but it's not free?  Do I need to buy this when i just purchased the Mac? 
    Confused about how that works...in the "old" days I just put the DVD in...
    Thanks!

    I have a new macbook pro...I want to do a clean install on a new hard drive...but when I goto the app store it shows lion app available but it's not free?  Do I need to buy this when i just purchased the Mac? 
    Confused about how that works...in the "old" days I just put the DVD in...
    Thanks!

  • LP8 won't install on my new macbook pro (ver 10.8.4).

    I purchased LP8 a couple years ago, installed it on my desktop, then purchased and installed the upgrade to LP9 when that came out. (My desktop is the only computer that I've installed LP on).
    I just bought a new Macbook Pro running OS X (ver. 10.8.4), however, when I tried installing LP8, the macbook wouldn't install b/c the program was too old and is therefore incompatible.
    I don't have to purchase an entire new set of LP in order to get it on my new laptop, do I? I still have plenty of those LP ugrade coupons left, so I don't want to re-purchase the DAW.
    Thanks...

    Sorry, but when Logic Pro 8 was released (2007) 10.5 was the most current OS X version. We are now at 10.8 and that OS doesn't support some of the old applications anymore. 6 years have passed since.

Maybe you are looking for