Installed flash disk does not boot (Solaris 10 on Fore CPU-50 VME cpu-card)

Greetings,
After installation of Solaris on a system with a flask disk as system disk, the disk is not bootable.
Configuration:
System: Fore CPU-50 VME cpu-card (sparc50)
OS: Solaris 10 (Sparc version, CD-media)
System-disk: ADTRON S35FA-8GC20N Smart Storage 3.5 SCSI Flash pack.
          (configured as c0t1d0)
Error message at boot:
Cant read disk label
Cant open disk label package
When I mount the installed disk on another system I can read and inspect the flash disk.
The logging files begin.log, finish.log and install_log in the /var/sadm/system/logs/ directory dont mention any errors during installation phase.
The logging file /var/sadm/system/logs/install_log begins with:
Configuring disk
-     Creating Solaris disk label (VTOC)
Creating and checking UFS filesystems
-     Creating / (c0t1d0s0)
-     etc.
This install_log file ends with:
Installing boot information
-     Installing boot blocks (c0t1d0s0)
-     Updating system firmware for automatic rebooting
How can I make this flash disk bootable?
Thanks,
Herm

It's a G3 with the integrated 5 i Smart array
controller. There are driver updates for Sol 10 on
the HP side. Just filter for OS. There you get the 5i
driver !
greets
D@veI searched the HP site, but wasn't able to find the driver for Solaris 10. Could you give me the url? I did find links for drivers for Solaris 8 & 9 though.
Thanks,
-Jeff

Similar Messages

Im trying to install a new application on my mac but it keeps on coming up with 'The volume of this disk does not meet the requirements for this update' any ideas how to solve this?

I have recently fully updated my mac to 10.8.2 and i am trying to install a small facebook application but every time i come to chose the disk it says ' OS X facebook developer preview can not be installed on this disk. This volume of this disk does not meet the requirements for this update' any ideas on how to get round this?
thanks

That may be the new Mountain Lion "sandbox" protective software kicking in, possibly, because ML "thinks" that App doesn't meet ML's new strict security requirements. A common phenomena. If you feel the 3rd party App is really OK, you can override this feature and install the new App by holding down the Command key when you click to install the new App. That's one possibility for the error message appearing. If not, another possibility is that that Developer Preview software package requires some previous piece of software be installed prior to downloading this Preview. You would have to check the Facebbok websiste's Developer Forums for help if this is the case.
Hope this helps

USB Flash Disk does not mount after Leopard Upgrade

I am not able to use my USB flash disk after the upgrade to Leopard. The disk does not mount at all, though i can see it listed in the System Profiler.
Before the upgrade to Leopard, the same disk used to work perfectly.
Can anyone please tell me how I can solve this issue ?
Thanks.

vikas wrote:
I am not able to use my USB flash disk after the upgrade to Leopard. The disk does not mount at all, though i can see it listed in the System Profiler.
Before the upgrade to Leopard, the same disk used to work perfectly.
Can anyone please tell me how I can solve this issue ?
Thanks.
Check to see if your USB Drive has the latest firmware. Leopard tends not to support older firmware.

K7N2 Delta2-LSR - SATA disk does not boot with IDE disk connected

I have K7N2 Delta2-LSR with SATA 160GB drive and CD burner connected as primary master.
When I'm connecting any IDE hard disk, the mainboard detects it corectly, but I'm not able to boot from SATA drive.
I tried to turn off IDE drive detection in BIOS (set [None] instead of [Auto]) and SATA boots!!! And Windows XP and Linux can see both disks!!!
Is it a BUG in BIOS?
Maciek
K7N2 Delta2-LSR (with latest BIOS Sep 18, 2004)
Athlon XP (Barton) 2800+
SATA drive WD 160GB
GF4MX440
FSB333, DDRAM 512MB/400
PSU 350W, works stable with 2 HDs and CDRW.

Strange my board boots fine from SATA with a PATA HDD connected. XP and Linux will see any disks connected to the motherboard and powered up in your system even if disabled in the bios apart from those connected to a separate raid controller which should be enabled. Both these operating systems address the hardware directly once their drivers are loaded so will ignore the settings you have in the bios. This behaviour is normal and not a bios bug. The main boot disk has of course to be enabled in the bios for the boot loader to operate. The boot priority with the new south bridge is PATA first followed by SATA and XP uses this too. To ensure that XP boots from SATA properly the PATA drive must be disconnected during the install process. You also need to ensure that the SATA disk is the only active partition connected to your system. If the PATA disk has been used to boot an operating system previously there may still be an active partition present on the drive. If that is the case removing the active partition should cure the problem but if the present arrangement works for you then fine.

Digital Editions 1.7 : not able to install, 1.8 does not allow to authorize for multiple IDs ?

Hello,
I just created an Adobe membership account in order to be able to install Adobe Digital Editions 1.7 on my Mac. When clicking on the install button on your website, I get error message "safari can't open the page "http://%25%7benv:www.adobe.com%7D/special/errorpages/404.html" because the page address is invalid.
We have purchased a number of e-Books some time ago, and based on the information I could find I should be able to authorise more than 1 computer in my family to read these books.
So, after some looking around, I found the possibility to download a preview of Adobe Digital Editions 1.8, and I authorised it with my newly created Adobe membership account. Next I also want to authorise my computer for the account of my Partner, but the menu option for "Authorise computer" is grayed out.
Please advise
(note : my system is identical to that of my partner, and she has been running Adobe Digital Editions for some time without problems … so it can't be a system problem on my end of the connection)
Thank you
Philip Planchenault

Please try the solutions provided in http://kb2.adobe.com/cps/403/kb403051.html if you can't install Adobe Digital Editions 1.7 from Adobe.com.
You need to open the PDF/EPUB file instead of the ACSM file to authorize your Partner's computer with your newly created account. You may select a book and then press Command + I to know where it is stored.

T60 does not boot with Intel T7600G CPU

I replaced my Intel Core Duo T2400 with Intel Core 2 Duo T7600G CPU in ThinkPad T60(1951-CTO) laptop. However, laptop does not boot with Intel Core 2 Duo T7600G CPU. It doesn't even complete the POST: https://db.tt/8UL8FlE0 As seen in the video, I plugged in the power adapter at 0:02 and pressed the power button at 0:06. One can hear a little click made by optical device. If I press the power button again at 0:16, this click does not happen. BIOS version is 2.27. I have reset the BIOS settings by disconnecting the CMOS battery, but this didn't help. Once I replace the T7600G with my old T2400 then I'm able to boot the laptop.
Any ideas what might cause such behavior? Shouldn't there be beep codes in case of CPU issues? What else to try?

TuuS wrote:
600X wrote:
Since you came from a T2400, does your T60 even have a Rev. 3 motherboard? If it does not, then no Core 2 Duo will work, only Core Duo's.
I don't claim to be the top authority on T60 motherboards, but I believe any will use a Core 2 T7600, 7400, 7200 if the firmware is updated.
My own experience mirrors what TuuS has stated. I have yet to see a T60/p from any walk of life with a recent BIOS that will bark at a proper Core 2 Duo CPU.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Has anyone been able to contact Adobe to learn why their Flash Player does not work on Mac OS 10.6.8, no matter how many updates you install? This seems like a big error by Adobe.

I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?

Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot.

New MBP i5 does not boot after hard disk swap

Hi there,
I received my new i5 MBP today. After booting it once with the installed HDD to check if it's ok, I exchanged the hard disk for the one in my Late 2008 Macbook Pro. After doing this, my Late 2008 Macbook Pro boots fine with the (new) hard disk from the new i5 MBP, but the i5 MBP does not boot with my old hard disk.
To give you some details:
- I have installed 10.6.3 on the (old) hard disk that's not booting.
- The i5 MBP boots fine from the installation DVD
- Disk utility finds and can read my hard disk, no errors
- PRAM NVRAM reset did not help
- when booting in safe mode, I can see the system stop booting after or while loading Extensions.mkext
My guess is, it tries to boot and load the wrong Extensions for the new system (CPU? GPU?). I have no idea how to fix this.
Any help would be greatly appreciated!

Focx,
Welcome to Apple Discussions.
Inserting the drive from an earlier model MBP will probably not work. The version of the system you have on that HD is designed for earlier hardware so when you put in in your new machine it's going to be recognized. What I'd recommend is re-installing the disk that came with the new machine and of course putting the 2008's disk back in the old machine. Then use Migration Assistant on the new machine and migrate your data from the old machine into the new machine.
This will provide a much more stable system and should work just fine.
Regards,
Roger

"Selected disk does not exist" after install using Unetbootin

Hello, I downloaed core iso file and use unetbootin to created a bootable usb disk, then I booted from the usb disk, installed the system as usual, then I rebooted the machine, the grub menu is shown, but when I selected archlinux, it shows:
Booting 'Arch Linux'
root (hd1,0)
Error 21: Selected disk does not exist
Press any key to continue...
if I press any key, it goes to grub menu again.
I noticed that when I installed the system, the usb disk is /dev/sda1, the harddisk is /dev/sdb1, /dev/sdb2 ... (several partitions), so I guess there is a problem here, and when I reboot, harddisk becomes /dev/sda1 sda2... so the system cannot find /dev/sdb1 2...
I read a post about unetbootin, it did not mention anything about the problem, so I think there is no problem install using unetbootin...

Try to change (hd1,0) pour (hd0,0). GRUB considers the disk from where he was loaded as hd0.
If you want more infos check with http://sourceforge.net/projects/bootinfoscript/
and post it's output.

Satellite M30-107 does not boot correctly after Recovery disk usage

Hi
I've recently got hold of a second hand toshiba Satellite M30-107 laptop, and decided to freshen it up.
I used the toshiba recovery disk, but after doing so the laptop no longer loads windows.
When turned on it shows the Toshiba start up disk for about a second then goes to a blank screen and freezes.
When turned off and on again a screen comes up reporting an error in shutting down and gives the options to start in safe mode etc. but choosing any of the options causes the machine to freeze.
Any help or advice would be much appreciated.
Thanks
jt

Hi
Sounds a little bit like the notebook does not boot due to the Windows software issue
Did you recover the M30 with the original Toshiba recovery CD which was supplied with this M30 unit?
Maybe Im wrong but for me it looks like a wrong recovery CD was used and an image with non compatible drivers was installed
You could try to install the OS from original Microsoft Win XP CD and could check if it would be possible to get the notebook ruining using clean OS.
In such case we ( you and me ;) ) could find out if this issue could be related to the software or hardware.
Bye

After installing 10.7.2 update the OS does not boot.Any thoughts????

After installing 10.7.2 update the OS does not boot. I tried to recover from recovery hd disk but after 3 attempts I am still not able to download lion! Any thoughts????

Try the Lion Community, and bookmark the notebook community (this is not).
You will probably need to provide others with more information too.
Cloned backup? TimeMachine? using Disk Utilityh to repair Lion from the recovery partition (comnand r on startup)

Boot failed: solaris server does not boot

Hi All,
one of my support person who has administrator previlages tried move the contents of root to trash directory, in the middle it got hung,and he had restrted the server.
Now the solaris does not boot. It says
boot failed
Enter Filename [platform/sun4v/kernel/sparcv9/unix]
and what ever we enter there it says boot cannot read.
Please suggest some workaround, nearly 200 users are down, actually it is our licnese server.

Hi,
What you could try is the following :
Boot the system from the solaris cd into single user mode.
Find out what the disk is you need to mount and mount it under /a
After you have done this you can see if you can move back the stuff that was moved from the root directory to the trash.
If that works then you could try and boot again from the disk to see if everything works again.
Nico

Help - Mac Mini does not boot after re-install of OS X

Hi,
I have a Mac Book Pro and Mac Mini. I needed to reinstall my Mac Mini but lost the install disks. The install disks of the Macbook do not work (machine specific). So what I did was boot the Mac Mini in firewire target mode and installed OS X to it from the Macbook. Worked ok. Except for one thing: The Mac mini does not boot the fresh OS X installation. I get a blinking folder icon with a question mark on top of it.
I booted from the Mac OS X install disk, repaired disk permissions etc. and tried to use the "Startup Disk" utility to select the hard drive as a boot device. But that utility does not offer me to select the hard disk, it doesn't even show up (while DiskUtility can perfectly see it).
Any hints for me? I am pretty much stuck right now.
Thanks

Well, see, the fact that it wouldn't let you boot from the MacBook install disks should have been your first clue to not try to do it. There's a reason it wouldn't let you. The MacBook install disks contain a version of the OS specific to the MacBook, in order to prevent people doing what you just tried to do (ie, installing the same copy of the OS on multiple machines).
If you don't have the Mac Mini system disks any more, you'll have to go buy a copy of OS X. You could also ask for help from an Apple Store, if there's one in your area, but I honestly don't know if they would give you new disks. I would think they should (for a small fee), since Mac Mini system disks would be useless to anyone who didn't already own a Mac Mini, but you never know.

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

Installed flash disk does not boot (Solaris 10 on Fore CPU-50 VME cpu-card)

Similar Messages

Maybe you are looking for