Installed Hamachi on Windows 8.1 comp, can't connect to internet

Hi, my friend and I have been trying to get a network set up so we can play Minecraft together. Everything works fine on his end, but when I installed Hamachi to join his network, it kills my internet connection. The icon in my taskbar says I'm connected, but I can't get any webpages to load. Uninstalling Hamachi immediately resolves the problem, but I'm hoping there's a way to get it to play nice with my computer. I've used Hamachi before, on a Windows 8 computer, and had no problems.  I tried this fix, but it only seemed to resolve the issue for ten minutes or so. Any help with this would be greatly appreciated!

Bump.

Similar Messages

  • Windows PC running Vista can't connect to internet via Time Capsule

    My Macbook works beautifully with my TC, however I cannot get my Windows PC (running Vista) to connect to the internet via the TC. My PC shows it's connected to the TC, however when I launch the web browser it shows the cannot connect page. Has anyone else experienced this problem and if so I welcome your feedback.

    I have the same problem. Did you work it out? If yes, what did you do?
    Ta

  • Need to install Adobe Reader in a Windows XP computer that is not connected to internet

    I downloaded Adobe Reader for Windows XP, then copied the file to the non-internet computer. During the first stage of installation, a intialization error terminated the installation. How do I get a copy of Adobe Reader to install  in a Windows XP computer that in not connected to the internet.

    Read this:
    http://forums.adobe.com/message/4901623#4901623

  • I need to deactivate CS4 on computer that can't connect to Internet in order to install on new computer

    I need to deactivate CS4 on computer that can't connect to Internet in order to install on new computer..what steps can I take to remedy this problem?

    Since your computer cannot connect to the internet you may have to talk to a support person. See this page
    Contact Customer Care
    You can always install on a second computer without deactivating

  • HT5304 Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet  with cable or wifi ! can see network and router,. Help

    Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet  with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !  

    recently had update
    Care to share which update?
    Have tried many things
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • After I installed the Moare recording, the firefox can't connect to internet. BTW I used the proxy and it works fine in another browse.

    After I installed the Moare recording, the firefox can't connect to internet. It worked fine before I installed Moare.
    I used the proxy and it works fine in another browse.

    I can not find "Moare recording" on the internet. Please see the following thread for troubleshooting. [https://support.mozilla.org/en-US/questions/935081?esab=a&s=proxies&r=3&as=s following thread;]

  • Adobe cloud application manager - can not connect to internet

    To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
    The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct  - Sydney Australia
    Question:
         1. Is anybody else having this problem
         2. How do we fix
    I already changed the time zone east coast US - did not change anything
    Could it be a corrupt program - thus requiring to reinstall program Application manager
    I am using Windows 7.
    It has been like it for ten days - It asks to log in everytime I turn computer on
    All programs in Creative Cloud work
    Any suggestions and solution
    Online help and phone help had no solutions other than what I suggested - that is reload application manager
    Thanks for help
    Ian Cleland

    The Creative Cloud File Synching was just offline, should be online now again.
    See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
    Maybe that was your problem.

  • Can't connect to internet on my old g4 flat screen, network + airport ok

    I installed an airport card on the g4 (dome) and connected to our wireless network, which gets a signal, (though the status is "not available"). I can't connect to internet (server not recognized), and every time I check the internet assistant app, the setting has been changed back to modem. The router is in the basement: my iMac is on the first floor and works fine, the g4 is on the second floor. Is that too far away? Do I need to update the g4? Two minis also work fine, one on first floor and one in basement. Any help appreciated.

    Which iMac G4 do you have? Some iMac G4s are 802.11b while the later ones were 802.11b/g.
    If your wireless network is configured for "802.11g only", the older 802.11b iMac G4 won't be able to connect.
    If your wireless network is configured for "802.11n only", the iMac G4 won't be able to connect since it isn't compatible with that.

  • Can't connect to Internet via Airport

    I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
    The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
    Anyone can help?

    By power downs do you mean Sleep?
    One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

  • Can't connect to Internet after update

    I've had this issue before but I was atleast able to get on iTunes & firefox. After this update my comp can't connect to the Internet period. I called my cable company & everything was working fine on their end. My modem communicates that it's linked my comp by a flashing light. In network prefrences my Ethernet says connected. I do not use a wireless router. I went to the Apple store & managed to get a connection smoothly. After I did the update was when my comp was unable to connect to the Internet, firefox, safari, iTunes NOTHING. I don't have any anti virus programs on my comp.
    Help anyone?

    Anyone???? This all happened after the 10.6.8 update...at the Apple store my Internet worked fine. Once I get this resolved I'm never updating again!

  • I can't connect to Internet. On the list of wireless connections, I have Wireless and thats it. I reset connection networks and it didn't change anything. Please help.

    I can't connect to Internet. On the list of network connections it has Wireless and thats it. My network isn't on there. I reset connections and there wasn't no change. Please help.

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Pcc can't connect to internet

    Hi Chazamsk,
    Welcome to the community,
    This sounds like you could be behind a firewall or an antivirus program is not allowing this device to work online.
    I would suggest going through your firewall settings and add PC Companion to the exceptions list.
    let us know how you get on.

    New problem, after pcc can install in my pc, now it can't connect to internet. It makes "not accesible". I have tried to find other solutions from other resource. But none of them works to solve my problem. Please give best solution....

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • Ipad2 -can i connect to internet  using a data card

    ipad2 -can i connect to internet  using a data card

    This article:
    http://edcommunity.apple.com/ali/story.php?itemID=18585&version=6330&pageID=1582 9
    depending on your experience level should tell you all you need to know.
    You don't need mobile me, you just need to know your mac's ip and have vnc
    client software of some sort running on the machine you are travelling with.
    Read the entire article, as once you get past the part about monitoring multiple machines there is some useful info.

  • Can't connect to Internet on my ipad

    Can't connect to Internet on my ipad I've tried everything nothing is working. All my other electronic s are working except the ipad help

    I don't know what you mean by "everything", but here is a comprehensive Wi-Fi troubleshooting guide:
    http://www.apple.com/support/ipad/wifi/

Maybe you are looking for

  • Print multiple PDFs from Windows Explorer causes Acrobat Pro 9.4 crash

    I sometimes need to create a batch of PDFs independently, after which it suits me to print them all as a single job. FYI I am running Acrobat Pro 9.4 under Windows 7 Ultimate 64bit. The sequence of the problem as follows: - With Acrobat closed, I go

  • File Saved Size is Twice Normal Size -  Photoshop CS3 OS 10.6.7

    I don't know what happened to make a couple of Photoshop files about double normal size on disk. I've been using Photoshop for a long time so I know how big the files should be - they're multilayered files which are normally about 250MB but are aroun

  • How do I sort books in series order?

    I have several books by the same author (20+). These are in three series (and sub series) The library sorts by AUTHOR just fine, but then puts the books in ALPHABETICAL order. The SERIES order in not ALPHABETICAL. The last (latest) book starts with "

  • Signature panel 'hangs' when viewing a signed document

    Hello and Merry Christmas to everyone, I am facing a problem when viewing a document ( https://drive.google.com/file/d/0B1wk9toh5e7AekxUcGM0RVc4Z2c/edit?usp=sharing ) with Adobe Reader. The signature panel appears to be frozen (not initialized), and

  • HT1349 How to cancel icloud storage

    Hi, I want my money back for the extra storage for Icloud! How do I cancel? I bought the storage and everytime I try to back up it says incomplete and still deducts the storage, it doesn't work , it doest back up anything!