Installed incorrect coreAudio driver and cannot uninstall

I've done something very stupid... I was misinformed by a friend and installed COREaudio driver v8.03 on my 2.9GHZ macbook pro with 10.8.2 Mountain Lion. I installed COREaudio v8.03 and now Ableton live does not pick up midi signals and every time I open Ableton, I get a message telling me that "Required software extensions are missing" and clicking ok redirects me to an anti piracy website called www.paceap.com but from what I've read, Pace is essentially a nasty piece of malware disguised as anti piracy software and I have no desire to install this.
The obvious soloution would be just to uninstall the COREaudio driver, but I can't figure out how.  There is no uninstaller and the audio folder in library which should contain the COREaudio files is empty with the exception of a folder named 'Digidesign' but my mac won't let me delete it as it is a required file.
Any help as to how to either uninstall this version, revert back to the built in COREaudio driver that came with my mac or even a different driver that would work would be greatly appreciated. Thank you
<Link Edited By Host>

I have no way of knowing what you did, but you can either restore from the backup you made before wrecking your system, or do a clean reinstallation of OS X.
Back up all data to at least two different storage devices, if you haven't already done so. The backups can be made with Time Machine or with a mirroring tool such as Carbon Copy Cloner. Preferably both.
Boot into Recovery (command-R at startup), launch Disk Utility, and erase the startup volume with the default options.This operation will destroy all data on the volume, so you had be better be sure of your backups. Quit Disk Utility and install OS X. When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For details of how this works, see here:
Using Setup Assistant
Transfer only "Users" and "Settings" – not "Applications" or "Other files." Don't transfer the Guest account, if it was enabled on the old system.
Reinstall your third-party software cautiously. Self-contained applications that install into the Applications folder by drag-and-drop or download from the App Store are safe. Anything that comes packaged as an installer or that prompts for an administrator password is suspect, and you must test thoroughly after reinstalling each such item to make sure you haven't restored the problem.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.

Similar Messages

  • Windows 7 won't load after installing new Hard Drive and Recovery software

    HP G72 Notebook PC
    xz218UAR
    I guess a virus crashed my hard drive so I bought a new one.  I installed the new drive and loaded the recovery disks that I also bought from HP.  Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS.  I've tried starting over from Disk 1 but it's not doing anything different to fix it.  
    I removed the new hard drive and reinstalled it but it's still doing the same thing.  
    What am I doing wrong and HOW DO I FIX IT?

    Hi,
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
    If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

    Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

    Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
    http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • Error occurred in deployment step 'Activate Features': Feature with Id 'GUID' is not installed in this farm, and cannot be added to this scope.

    Really frustrated!!! Using SP 2010 with VS 2010. Created a simple project with just 1 elements.xml file for adding 2 columns. Scope of the feature is "Site". When I right click and deploy it gives below error.
    Error occurred in deployment step 'Activate Features': Feature with Id 'GUID' is not installed in this farm, and cannot be added to this scope.
    If I look at the CA, I see the wsp is installed but NOT deployed (Status = "Not Deployed", "Deployed To" = None). I have checked the GUID in the error and its my feature id.
    Please let me know what is going wrong here! Thanks for your help.
    Please mark as 'Propose as Answer' or 'Vote' as appropriate.

    Hi Sagir,
    Try to check the GUID in error message to see if it’s in Feature1.Template.xml file.
    For more information, please refer to
    http://markviky.blogspot.com/2010/09/error-while-activating-feature.html
    http://alltoft.wordpress.com/2011/06/13/sp2010-error-occurred-in-deployment-step-activate-features/
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help

    I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help

    What exactly are you trying to do? PVRs are for recording from TV not computers.
    Either way, if it's complaining about DOS mode, it's Windows oriented software and not Mac compatible.

  • I've downloaded and installed flashplayer five times and cannot get it to work

    I've downloaded and installed flashplayer five times and cannot get it to work.  Each time I go back to espn3 it tells me to install a new flashplayer.

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/thread/1195540

  • Adobe won't work and cannot uninstall

    adobe won't work and cnnot uninstall

    Adobe is a company with more than hundred software products; what program are you talking about?
    What is your operating system & version?
    What exactly means "won't work" and "cannot uninstall"?

  • I had a new motherboard installed in my laptop and cannot...

    I had a new motherboard installed in my laptop and cannot hookup to my wireless connection. There is an unsecured network named 'linksys' which I assume is my router. So I tried the 'wizard' and everything was going smoothly until I put in the default IP address (192.168.1.1) and then it wants a subnet mask which I don't know. What am I doing wrong?

    is there any wired/wireless computer going online through the router ?? let me know the router model number and the ISP deatils...

  • I just installed a new router and cannot get my ipad to connect now and I have no idea what settings should be or how to go about this

    I just installed a new router and cannot connect with my ipad now.  I have no idea what settings I shold be looking at or how to do this

    you likely need to setup your router using an eathernet cable and a computer to turn on the wifi part and set an encryption level and password or the likes
    if you havent do such things before you may require help from somebody who have
    the router likely comes with an instruction manual how you set it up the first time

  • Can't install both GART driver and display driver!!

    Ever since I got my k8n neo 2 + 3200 winchester for christmas I have had tons of problems. Problems that even come out of nowhere, like when one night when I was playing WoW, the game crashed and I eventually had to reformat. Ever since then I have been unable to install both the latest nforce GART driver and the nvdisplay driver at the same time. I can install either one seperately, but when both installed Windows boots up to a black screen. And there's nothing I can do about it. I've just gone with having only the display driver installed, but I noticed that my 6800GT has the bus listed as PCIx0 which is obviously incorrect, it should be AGP 8x. I'm pretty sure that is because the GART driver cannot be installed, as the GART driver has software to manage the AGP bus. I'm ALSO pretty sure that this is one of the reasons I get such pathetic performance in Doom 3.  It dips down to 10-15 fps often, and it NEVER did that when I had my old P4 3.0 ghz. What gives? Does anybody have ANY suggestions as to why I can't have both of these drivers installed without windows just giving me a black screen???   
    I am so disappointed with this board that I don't see how I could ever bring myself to buy MSI again. 

    Quote from: Tiresmoke on 09-March-05, 23:41:51
    Sarcasm.
    http://dictionary.reference.com/search?q=sarcasm
    sarcasm = "A cutting, often ironic remark intended to wound."
    That comment of mine you quoted was neither ironic nor intended to wound anybody or anything. I was simply voicing my disappointment in this motherboard, I have had many other problems with this board besides the one I am asking for help with right here. Please know what sarcasm means before you accuse me of using it. It's not my intent to get into trouble here. No hard feelings.
    Quote from: Tiresmoke on 09-March-05, 23:41:51
    This is not a MB issue.
     I never had this problem with my pc and drivers before I bought the Neo2. I am fully open to believing that my PSU is the problem, however.
    Quote from: Tiresmoke on 09-March-05, 23:41:51
    However as you didn't say it was a clean install
    Sorry, I thought this was clear enough. (down)
    Quote from: Law&Order on 09-March-05, 08:42:47
    I eventually had to reformat.
    Anyway, I am going to find out my PSU volts in a moment. I will edit this post when I have found them.
    Edit: Argh, I've never looked for PSU specs before. Can anybody tell me how to do that? PSU is high up in the case and I'd have to remove it to get a clean look, is there any other way of doing it? Sorry, a little embarrassing for me.  I appreciate all of your suggestions. Thanks!

  • Problems installing second hard drive and second DVD recorder

    I have tried about every combination of tricks to install a second hard drive.  I want to add a 250GB, WD IDE hard drive to my 3000J 115 7387A32 on the IDE channel.  I have set up the bios then added the drive and the reverse but cannot get computer to boot in either case.  It locks on the first screen where is says hit Enter to.... Enter makes the text go away, but nothing after. I am trying to install it as a single drive on the secondary IDE channel. 
    I know the HD is good as I removed it from another computer.  It does have Win XP on it.  I will format it using Vista IF I can get it installed.
    Basically, I am having the same problems within stalling the second DVD, which is SATA.

    Your initial hard drive should be jumpered as Master. When you install a second hard drive it must be jumpered Slave. There should be a diagram on the case of the HD showing the jumper locations.
    Power Macintosh G3 and G4: IDE Master and Slave Support and Configuration
    http://docs.info.apple.com/article.html?artnum=24342
    Power Mac G4: Installing Internal Storage Devices
    http://support.apple.com/kb/HT1815
     Cheers, Tom

  • Cannot Install Thinkpad Configuration Utility and Cannot Find it on Downloads Site

    I uninstalled the Thinkpad Configuration Utility and when I try to reinstall the installation fails.  It no longer seems to be a download option on the Lenovo support site.  Has this utility been withdrawn and if so what replaces it?  This link
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67988
    with the latest BIOS update talks about using the utility to determine which version is installed which would seem an odd thing to do if the utility is no longer supported!
    Message Edited by BMGRAHAM on 05-16-2008 12:00 AM

    Hi,
    Pls check the site
    http://java.sun.com/xml/jaxb
    The JAXB Beta Implementation is now available.
    Thanks,
    Bhakti
    I am looking for JAXB and cannot find a download link.
    The only thing at the download link is the jaxb arch
    spec, but no s/w.
    Where is this stuff? Has it been taken off?
    -Mark Sabatini

  • Playlists Missing After Install New Hard Drive and Upgrade to Win 7

    My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
    I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
    (I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
    I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
    Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
    ("My Administrative Account"): Users / Owner / My Music
    and
    ("My User Account"): Users / Yank / My Music
    My "Administrative" and "User" user accounts contain different songs in iTunes.
    If helpful, I could describe what is in each of these 2 backed-up music folders.
    To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
    Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
    I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
    I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
    When I open my iTunes, I have no playlists.
    However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
    How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
    Thank you.

    YAY!
    I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
    I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
    Four files with that name were found, with different dates.
    I chose the most recent, dated just a few days before I made my backup to the external hard drive.
    I copied it to my computer's hard drive into the following location:
    C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
    which overwrote the file which was located there.
    When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
    THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
    CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
    THANK YOU AGAIN SO MUCH!

  • Installed new hard drive and ram but freezes on apple logo

    i have a mid 2010 macbook pro and last night i opened it up and installed a 750GB hard drive and 8gb of ram.
    now my computer doesn't want to boot up, even with the install DVD (original one)
    i have done the PRAM thing and even went back to my old hard drive and even that one freezes on the apple logo.
    the spinning wheel spins for about 30 seconds then freezes.
    HELP, i need my macbook working.
    Also, my windows partition works for some reason, but i can't go to disk utility or anything from it.

    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Maybe you are looking for

  • HFM Application Library error Null while deploying the validated app

    Hello, I am trying to deploy a HFM application on EPM 11.1.3 and when I right click on the application in Application library of EPMA, I am getting a pop-up with the following error: Application Library Error null Please note: 1. This is a EPMA manag

  • How get Inserted value Id in MySql ?.

    Hi,     How to Get Inserted value Id in MYSQL. I am using " select LAST_INSERT_ID() " But its not working Properly.Can u provide any other  solution For this.Please Help me. Thanks &  Regards Madhava Reddy.

  • How find print program and form name from the spool list

    Hi,       I have a requirement to find print program and form name from the spool list. I got the list of programs and forms from TNAPR table, I also want to find out any custom program sending the form directly to the spool. Cheers Sam

  • Hi friends need some help !

    i want to recreate a custom program which will give the output same as VF01.  i did the same for VL09 .it worked fine and I just copied the program going to the System-->status into my zreport.. but incase of VF01 when i am copying the SAPMV60A  AND

  • FCE HD (3.5.1) importing analog videotape via Canopus 110

    I am new to all aspects of Final Cut Express and the Canopus 110 and need some serious help to capture video from VHS tape. I've followed (I think) all directions for the equipment and software, but I cannot get it to work -probably a simple solution