Installed ios 5 now have 5g of other content

installed ios 5 and when it was finished my phone had 5g of other content which i can't get rid of. I have unchecked sync's etc but still no luck.

Looks as if it is to do with your iPhone, if it can't find any Wi-Fi networks and they are turned on and set to discoverable, even after restarting the router it's still unable to find it my recommendation is to do a restore through iTunes, the update may not have installed properly, I have an iPhone 4 16GB (Black) running iOS 5.0.1 and it finds my Wi-Fi networks and log's onto them no problem, so clearly the software works, just seems that your iPhone is having a bad time
You've done everything else I'd reccommend, normal re-boot, soft reset, reset network settings.
Think it's time to do a full back up in iTunes and do the restore, then see if that resolves the issue, be sure to let us know how it goes if you do decide to do this.

Similar Messages

  • Using iphoto 9.2.1 on imac osx 10.6.8 tried to open, got a message that I had no library. Browsed discussions, followed directions to trash plist. Now have app,but no content/backup unavailable. help?

    Using iphoto 9.2.1 on imac osx 10.6.8 tried to open it, got a message that I had no library. Browsed discussions, followed directions to trash plist. Now have app,but no content. Backup unavailable, at least for now.  help?
    Carl

    Well if you're library is gone and you have no back up then you can try a File Recovery app like
    File Salvage
    Regards
    TD

  • I recently tried to download two movies.  Would not complete download. Movies were removed from que, however, the Ipade now shows 10MB of "Other" content that I cannot delete. Any suggestions?

    Tried to download two movies. Neither was successful. Apple removed them from download que and reimbursed cost. Now I have 10MB of "Other" content that I cannot delete.  There are NO movies listed on the Ipad or Itunes to delete.  Any suggestions?

    To Scxy1234: I also don't know why my paste special options only had 3 choices excluding "device independent bitmap'
    To Steve Fan: I created the new second user account in my window 8. It was set as a standard account, not as administrator account as my first original user account. Specifically, i used the same email address with this forum account's to
    create this second user account. It means that the second user account in my laptop also was a Microsoft account.
    Can you guess what happened after i had logged in to the second user account? I opened some random websites by firefox, copied and pasted all text and pictures on these websites into a word document and onenote successfully without any problems!!!!
    I saved this word document and exported this onenote section to a Usb. After that, i switched from second standard user account to my window administrator account and opened the two files which were saved to Usb previously. They were opened and displayed
    normally as the same as what i previously had seen in the second user account, i.e. pasted text and pictures were displayed normally. However, when i opened the same web address again to copy the same text and pictures to word and onenote, there were only
    text lines pasted successfully, excluding pictures! This old strange problem happened again when using original administrator account for logging in window. In contrast, when using the second standard user account to log in window, copying and pasting text
    and online pictures of Microsoft office worked normally.
    I truly don't figure out the reason(s) caused this strange problem. I think my case is a special case because i tried all solutions other people had tried but nothing worked.
    Please help me!
    p/s: when i logged in the second standard user account, i opened the paste special options in word and there were only 3 choices under paste special options, excluding "device independent bitmap"

  • Iweb 08 installed but now navigation bar and other properties aren't showin

    iweb 06 was working beautifully. Then loaded iweb 08 and published. Now the navigation bar doesn't show in most browsers and other letter shadowing and picture shadowing aren't showing up as well. I've checked to be sure the navigation isn't turn off. I've published all and I've published singularly. Still no luck.
    Help please. Folks can't get to my site and navigate and see how nice it is...
    J.

    More details from another example:
    To illustrate what I see at the PC at work I made some sreenshots from my site:
    http://www.hasselo.eu/photography/Links_files/HasseloEuHome.jpg
    http://www.hasselo.eu/photography/Links_files/HasseloEuGalleries.jpg
    Since I made the screenshots, the site was updated with new content, but the problems are still the same.
    As you can see:
    -Navigation bar missing
    -Reflections missing
    I have no problems with other websites, therefore I assume that this is iWeb related and Apple should produce a fix for this.

  • [SOLVED]Installed XFCE, now have a disabled display, can't get it back

    First thing I tried to do after installing XFCE was change the screen res to match my monitor. The display dialog had two screens showing - one labeled 'laptop', and the other 'Viewsonic bla'. As this is not a laptop, and my screen is indeed the Viewsonic bla, I unchecked the 'Use this display' option next to 'Laptop'.
    My screen then went black, and will not come back. There was no countdown 'Do you want to keep these settings' dialog, although I guess there might have been (the screen was blank) and possibly I accidentally told it 'yes' in my blind flailings. What I meant to do was press Esc, but I may have pressed some button previously that activated a 'Yes' option. Or maybe there is no double-check dialog at all! Either way, I can't get XFCE to show up any more. Rebooting the machine doesn't work - the screen just shuts down saying 'No signal'
    To fix this I've decided to reinstall XFCE. Is it enough to just run pacman -S xfce4 again, or is there another command line option to do a reinstall? Also, what about config files? I can see no dot files or directories in my home folder that could be XFCE related. Thanks.
    Last edited by lightstream (2011-12-16 13:26:17)

    lightstream wrote:Also, what about config files? I can see no dot files or directories in my home folder that could be XFCE related. Thanks.
    On my machine, there are XFCE related settings stored in ~/.config/xfce4 and ~/.config/xfce4-session etc

  • New ram installed and now have black screen then it shutsdown

    ive installed an extra 2gb of ram on hp630 notebook and when i turn on it has a black screen then shuts down after 1 minute. i think maybe one of the slots dont work as the original 2gb ram that in it works in one slot but not the other . so when i put the 2gb ram in i get black screen then shut down but its the same it works in the bottom slot but not the top. any help would be a massive help.

    Hi
    Seems to be an issue with the Memory slot which need to replaced. In case if you unit is still cover by the warranty i would request you to call HP Technical support and get the System Board replaced.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

    I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

    The only available, signed, iOS, for your iPod, is iOS 7.1. That's why you can't install iOS 6.1.6.

  • HT4623 I upgraded to iOS 7 but now have to reinstall printer.

    I have upgraded my impasto ios7and did have a wireless printer installed and now have to reinstall? Is this correct?

    yes you will prob. will have to reinstall

  • HT4623 Getting the error message "Unable to Install Update" when trying to install IOS update

    Getting the error message "Unable to Install Update" when trying to install IOS update

    Restore teh device.

  • Have Macbook Pro & 4th gen iPod Touch. Downloaded & installed iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says "iTunes" Data too new to be used with this version of iTunes.

    Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1.  I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??

    Is your computer still authorized in the Store menu in iTunes?
    iTunes Store: About authorization and deauthorization
    When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
    Did you try to deselect Wi-Fi syncing and enable it again after that?
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    Did you already transfer your purchases and manually started a backup?

  • I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    See Here... Unable to Update or Restore...
    http://support.apple.com/kb/HT1808

  • After installing ios 6 to my iphone4 and my daughters iphone4s we now get each others text messages. How can we disconnect from each other so that I don't receive the text messages from her and her friends and she does not receive mine?

    After installing IOS6 on my iphone 4 and my daughters iphone 4s we have this wonderful connection that we would like to break.  We are now seeing/receiving each others text messages.  I love my daughter but I don't really want to get all of her text messages from her friends and I don't really want to read every response she sends.  Additionally, she can also see my text messages and there are times I really don't need for her to know everything that I am doing. 
    So It is time to cut the cord we need our own seperate texting.  I am not sure what we did to have this happen but how do we undo it?

    Get your Apple ID sort out.
    Only use the same Apple ID in Settings > iTunes & App Stores to share purchases, no where else.
    Here some tips, it was written for IOS 5 but it's still valid for iOS 6.
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

  • I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now?  so far every app I have tried says I need an updated IOS.  This sounds like I now have an apple product paper weight.

    I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now?  so far every app I have tried says I need an updated IOS.  This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product. 

    Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
    * tax not included.

  • Hi, I just got done installing IOS 7 and now whenever I send an i message my email shows up on the other phone. My phone number is greyed out and doen't give me the option to click it. Please help!

    Hi, I just got done installing IOS 7 and now whenever I send an i message my email shows up on the other phone. My phone number is greyed out and doen't give me the option to click it. Please help!

    Where is the phone number on the iPod?
    If you have an iPhone with iOS and use the same ID for Messages and FaceTime as on the iPod the iPhone's phone number will be listed for Messages and FaceTime on the iPod.
    If you changed phone numbers on the iPhone, sign out of Messages and FaceTime and then sing back in. Then do the same a little while later on the iPod.
    For some info see:
    iOS: About Messages

  • HT5278 I have an iPhone 4, and I go to Settings, General, Software Update, and it says iOS 5.1.1 and I tap on the Install Now, and Agree, then i get the verifying update, and then it says "unable to install update, an error occured installing iOS 5.1.1

    I have an iPhone 4, and I go to Settings, General, Software Update, and it says iOS 5.1.1 and I tap on the Install Now, and Agree, then i get the verifying update, and then it says "unable to install update, an error occured installing iOS 5.1.1

    I have exactly the same problem.  iPhone 4S, never been jailbroken.  Not behind a firewall and it happens whether I am on my home compute (iTunes) or directly thru Settings_Update.
    Looks like loads of people are having the same problem - and as far as I can see, Apple's sole reply is jailbreak or behind firewall/ security settings/anti-virus.  None of those apply here!

Maybe you are looking for

  • Can the subselect be made into a join?

    SELECT A.ROLEUSER, A.ROLENAME, B.OPID FROM PSROLEUSER A, PSOPRDEFN B WHERE B.OPRID = A.ROLEUSER AND A.ROLEUSER IN (SELECT C.ROLEUSER FROM PSROLEUSER C WHERE C.ROLENAME = 'AAA_DDD_TECHNICAL'

  • BPM TOOL, what is Visual Composer Vs  any other BPM Tool

    Could you please share information regarding using a modeling tool to author business process [as-is/to-be] ours is new implemantation and we already own sap business suite software, and our implementation /configuration Team is considering of using

  • Allow 5 axis image stabilization for non system lenses in A7(r)II series

    Many people use/will use their excellent non system manual focus non system macro lenses on the A7II and undoubtedly on the soon to be released A7RII. Stabilization in the X/Y planes is very very important for macro.  Sony on the A7II only stablizes

  • Cannot View Images in Bridge, only CR2 icons show

    In Bridge,CS3, After I open the folder I want, all I see is the orange colored Icons (CR2)of my raw Images. If I click on a given Icon the image comes up, but it is not possible to review(SEE)all the images at the same time , which I could do in CS2,

  • Dynamic table field for filtering a selection criteria

    Hi Friends I am using a table a981 and fetching data in internal table but the table has a fieil Country whose technical name is ALAND in dev and LAND1 in production.Now i cannot use LAND1 as it wont let me to activate the report and if i use ALAND i