Installed ios 6 on new iPad and siri will not work.

Good morning, I installed ios6 on the new iPad and siri will not work. Each time I try to use siri she says "uh oh, I'm having a problem. Please try again. I have tried turning siri off and back on again. Resetting the iPad, resetting the network, turning Airplane Mode off and on again. All to know avail. My iphone 5 works great and so does my wife's iphone 4s with ios6. I have called Apple support but there only suggestion was that the servers were busy. If that was the case my other devices would not work either. Plus the servers wouldn't be busy for four days. Any help anyone could provide would be greatly appreciated. I was looking forward to using siri on the new iPad and other folks don't seem to be having a problem.
Thanks, and have a great day.

Then you need to change your device details as this still says iPad2.
It's very possible Apple's servers have been busy for 4 days as not everyone downloaded iOS 6 on the day it was announced. I downloaded it last Friday, myself, as an example.
There are a millions and millions of people using Apple iDevices.
Just because everything went fine with the iOS 6 updates of your iPhone 4 and 5 doesn't mean something couldn't have gone wrong with an update to your iPad3
If the iOS update missed something during the download, I am not sure how to go about re-downloading iOS 6 to fix the issue you are having.

Similar Messages

I installed iTunes on new laptop and it will not allow me to put songs to my phone

I installed iTunes on new laptop and it will not allow me to put songs to my phone

Make sure you have the latest version of iTunes, which is available here -> http://www.apple.com/itunes/download/
Then try following the steps in this Apple article to create an account without a credit card -> Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

All non-Apple apps will not open on my phone. I restored as a new phone and still will not work

All non-Apple apps will not open on my phone. I restored as a new phone and still will not work

Hello there, KScotty.
The following Knowledge Base article offers up some great steps for troubleshooting apps installed on your iOS device:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have installed flash player several times and it will not work.

I have completely uninstalled and reinstalled it several times to no avail. itsays it successfully installed but refuses to work.

What is your operating system & web browser?
What exactly means "will not work"?

I downloaded the new version and it will not work on my sytem

I have used Firefox for the last three years with no problems. It asked me to download an update version 6.01 and now it will not work at all!!!???? I have cleaned it out then reloaded still the same issue will not hook up to the web page

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

New iPad and iPhone4s appstore not working

I have an apple iPad (New iPad) and an apple iPhone4S. The features in Appstore are not working. Chart and featured pages are coming white blank. How to resolve this problem?

Thank you very much. Your suggestion solved my problem. Thanks once again.

After install of ios7 on ipad mini wifi will not work

I have installed ios7 on my mini. After doin so WiFi will not work. Button is greyed out. When I try to erase all content and go back to factory it wants my password and won't do so because it says no internet connection. Had I know this was going to happen I would have left well enough alone. I have tried hard resetting by holding home and off button simultaneously but not working. Anyone have any ideas? This mini is now basically useless to me without internet. I'm really annoyed.

Hello Andy,
1st guess would be an incompatible extension from the previous OS, 2nd would be a reinstall of the OS is needed, but...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Installed Maverick on new IMac and printer will not print

I purchased a new IMac in December after always having PCs so there has been a learning curve for me. A few days ago I installed the Maverick update. So far, so good except my printer no longer will print. I have a new Canon MC7120 printer/scanner. I am still able to scan, but not print. When trying to print, I have received a popup telling me to install software.
Would you be able to walk me through what I am suppose to do? I am assuming I am to install software again that I installed when I purchased the printer. Being new to Macs, I don't want to do something I shouldn't. Your help would be appreciated. Thank you

The printer is not listed as supported on this page:
OS X: Printer and scanner software available for download
You may be able to get it to work with the software from here:
Canon U.S.A. : Consumer & Home Office : PIXMA MG7120

TS3274 I have the first iPad and it will not update to IOS 6. It is also dropping wifi. Any ideas

I have the first iPad and it will not update to IOS 6. It is also dropping wifi. Any ideas

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT201335 It got nA new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.

It got A new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.

It reboots it but unplugging can also rectify communication issues like this. A restore would be the next step.

Imac connects to time capsule through wifi but ipad and iphone will not connect

I just installed the new Airport Time Capsule. My Imac connects fine through wifi bit my ipad and iphone will not connect to the wifi. They appear in the wifi settings in the devices but will not connect. I have reset modem and time capsule and tried forget network and nothing is working. ANy assistance would be appreciated. Thanks

So I called apple support being fairly certain that I wasn't going to be able to fix this over the phone but essentially, it now works flawlessly with my iOS devices. Here is what I did.
I have a Motorola cable modem surfboard 6421.
I reset my network settings to dhcp and NAT from the default bridge only mode which the tech said only allows one device to connect at a time. Considering my MBA was already connected to the AE, that would explain why my other iOS devices wouldn't connect. After I changed the settings for the network to DHCP and NAT, the router restarted. I then disconnected the power and coaxial cable from the cable modem and reconnected it and once everything came back up, all devices connected fine. Good throughout and signal. Hope this helps.

HT4623 I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store and Safari keeps crashing

I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store- I cannot search or even view my purchases.
Also Safari keeps crashing. I have shut down the phone and restarted it twice and that hasn't helped. Any ideas?

Libellen wrote:
I updated my Iphone 5s with IOS 7.0.5
The Update would not have Installed if it was not suitable for your Device.
Libellen wrote:
... anyhowe the phone is now totaly "dead" and will not turn on
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

test to see if it's installed, Flash Player Help

Just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

Best route here is to uninstall iTunes completely using the Windows Control Panel.
Make sure you know exactly which version of Win 7 you're running.
Restart your computer from cold (with no iTunes).
Go to Apple website and download the correct version for your operating system. Install following Apple prompts.
Once installed, close iTunes.
Restart your computer from cold (with new iTunes).
Start iTunes - all should be operating well! Good luck ...

Installed ios 6 on new iPad and siri will not work.

Similar Messages

Maybe you are looking for