Installed iOS 8.1.3 on iPhone 6 and Apple TV Remote App no longer works
After installing 8.1.3 and rebooting, the Apple TV Remote App stopped working. I can tap to select options, but cannot swipe or gesture to move to other options. Rebooted Apple TV and iPhone 6, no change. No other apps were affected.
Hi Chris Parich,
I see that you may be seeing some issues with your ability to connect to the Apple TV through your Remote App. Here is an article with some troubleshooting steps to help you address this:
Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV - Apple Support
http://support.apple.com/en-us/HT201397
Thanks for coming to the Apple Support Communities!
Regards,
Braden
Similar Messages
-
After I upgraded my iPhone to 7.1, my REMOTE app no longer works. Any ideas?
After I upgraded my iPhone 5 to 7.1, my REMOTE app no longer seems to be connected to my Apple TV. Has anyone had and solved this problem?
I rechecked each question you posed; I even turned off and turned back on the Apple TV and iTunes Home Sharing, deleted the app and redownloaded it several times. I am still getting the message on my phone to turn on Home Sharing in iTunes on my computer or on Apple TV. I can't think of any changes I made since the REMOTE app worked except I downloaded the iOS 7.1. About a week before uploading the new iOS, I moved my router. Could this have been a cause of my problem? Everything else seems to work. Do you have any other suggestions? Or do you think the REMOTE app isn't working correctly with the new iOS 71.? Thank you for responding. This is above this Nana's head.
-
Yesterday evening i installed ios 7.2 on my iphone 4 and since then my iphone's screen is stuck on the itunes n a battery recharge sign under it. what should i do?
That's not a battery recharge sign. It's telling you your phone is in recovery mode and you need to plug it into your computer running iTunes.
-
Installed iOS 7.04 in my iPhone 5 and back camera and flashlight still inop. Any others out there with this problem still and any ideal of when there will be a fix for it?
I'm using iOS 7.04 on my iPhone and basically can't use it. The screen is going crazy. I type and special characters show up. I have to hit send more than once (it grays out, then hit again) then it sends. I type words in text or email and it backspaces and deletes my entire message. I tap an application and it starts wiggling to delete. I've reboot several times. I'm looking at restoring, but that is a pain in the arse (it's my work phone). I'm nervous it will not restore properly.
I have iOS 7.03 on iPad and have no issues. -
I had to purchase two OS X system upgrades, snow leopard and mountain lion, just to connect my new iPhone 5 and somewhere between uploading iPhone 4S pics to iCloud some important pics disappeared then installed new iTunes and purchased new iPhoto all just to connect new iPhone 5 and now half my apps won't work. No Rosetta to make apps work but its not as simple as upgrading apps and missing lost dogs pics from iCloud...HELP!
File a complaint with Apple for not giving adequate warning before upgrading OS X that it would render PPC programs dead.
That someone at Apple said requiring the iPhone 5 to have 10.8 (10.6.8 is the minimum actually) and in order to remain a loyal Apple customer they need to fix this mess and revert your machine and software back to 10.6.8
You see, 10.6.8 would have ran your iPhone 5 and ran your PPC based software, so whoever told you to upgrade to 10.8 was wrong and they need to fix your machine.
It can be reverted to 10.6.8 yourself.
How to revert your Mac to Snow Leopard
Most commonly used backup methods -
Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)
I am unable to use my Remote app 2.1.1 with my iTunes 10.2.1.
I recently updated all software/firmware as follows:
1st Gen iPad - iOS 4.3 (8F190)
iTunes - 10.2.1 (1)
Remote - 2.1.1
I am using an iMac circa 2005 (6.1)
Mac OS X 10.6.7
2.33 Ghz Intel Core Duo; 2 GB 667 MHz DDR2 SDRAM
Wirless Router: Netgear WNDR3400, SSIDs off, WMM enabled.
I have turned on Home Sharing on both iTunes and the Remote app.
I have made sure that both iMac and iPad are on same network.
I have made sure that iTunes is allowing incoming connections through the firewall settings in system preferences.
I have deleted and reinstalled both iTunes on the iMac and Remote app on the iPad.
I have trashed the preferences for iTunes.
I have gone to Settings on the iPad and turned on Home Sharing through the iPod app.
I no longer see "Automatically search for iPods, iPhones, or iPads" in the iTunes preferences...ANYWHERE.
I have reset the router.
I have reinstalled iTunes 10.1.1 - didn't work, re-updated to 10.2.1
Installed Mac OS X 10.6.7 combo update.
Nothing seems to work.
iTunes does not show my iPad when the Remote app is launched and gives me the 4 digit code to type in to pair it.
Anyone else having this issue?
Any solutions?
Thank you,same issue iphone 4
-
Why does Remote App no longer work since upgrading to IOS 6?
Since updating my Touch to IOS 6, I can no longer use the Remote App to connect to my itunes library on my iMac. I have tried both homesharing and "add an itunes library" and both have failed. I have been through all the posted support articles with no success. By the way, I can still use my first generation IPAD to connect with no problems.
I have this problem also,
We have an iPad 2, iPod Touch, iPhone 4,4s and iMac.
The printer is a HP LaserJet CP1525nw and is listed as a compatable AirPrint printer.
The two iPhones and iPad 2 were upgraded to IOS6 last week.
We wanted to print something out today and when selecting printer it came up with "No AirPrint Printers Found".
This happened on the Other iPhone and the iPad as well. However all the other devices that were not upgraded still work.
I have upgraded the firmware on the printer to the latest version, however this has not helped. I have restarted all devices as well as my network router multiple times to no avail.
Apple need to provide a fix as this provlem is evidently as a result of their IOS6 upgrade. -
IPhone remote app no longer working after iPhone update to version 4.2.1
I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
"Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
Home sharing is enabled on all the Apple TV devices
I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
Suggestions ?Update:
Issue is still occuring, after resetting wireless router.
Router: Netgear WNDR3400, SSID's turned off, WMM is enabled. -
I installed ios 7.1.1 on iphone 4s and now my phone won't work. what do i do to make it work?
My iphone is 4s. Yesterday at 5am i found the software update 7.1.1 & there wasnt anything that said that this update for iphone 5 or more, so i installed it, but imy phone kept showing me that sign connect with the itunes thing, and i did connect, and so it kept cracking ever second, and now i dont know whether it's installed or not but everytime i open itunes ( connected with my phone ). This i what it tells me ( iPhone Recovery Mode. Your iPhone software is up to date. iTunes will automatically check for an update again 5/1/2014. ) & the only choice i have to click on is RESTORE iPhone. and when i do restore, it tells me restore and update and then i am like forced to restore and update ios 7.1.1 when it's not even available for my device. Now my phone keeps shutting down and when it opens, it only shows the apple sign and then a wire as if telling me to connect to iTunes. My phone has been like that for almost two days now. I went to 3 apple stores near me, the apple experts werent there. & then i went to a shop & the man there asked for 160 LE for updating a software on my phone :/. Why should i pay when it's honestly apple's fault that they didnt say that this update was for only iphones 5 or whatever, why do i even get the update on my iphone 4s when there's clearly no escpae from this "Recovery Mode" and no help from anyone?
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
-
I did the reset recovery mode and it doesn't work. Theres no logo that popped on and i'm literally freaking out.
my last option is going to the apple store today and see how that goes.
warn you don't update the software just yet for iphone 4s users, i'm not the only one that with black out screen.try a hard reset hold sleep/wake button and home button down together untill apple appears.
if this doesnt work try to backup and restore via itunes.
Peace, Clyde -
Anybody have ideas why.
Most likely because your phone or your Apple TV has lost WiFI connection to your local network. Not enough info in your post for a more specific suggestion.
-
Since upgrading iphone to ios5 the kodak pic flip app no longer works any ideas
since i installed ios5 on to my iphone 4 the kodak pic flip app no longer works when i send to printer readout on printer screen says receiving then says
cancelling then ejects a blank sheet of paper .
`The app worked fine before upgrading the iphone ....helpAbout what?
Apple can do nothing about a 3rd party app not functioning properly. Testing and any required updates for an app is the app developer's responsibility. -
IPad and iPhone Remote app no longer see my AppleTV (1st Generation)
For months, I've been using the Remote app from my iPad to control my first generation AppleTV. When I got an iPhone 4 and got the Remote app for it, I tried to do the same thing, but now AppleTV will not recognize my iPhone 4, and no longer recognizes my iPad. All it will allow me to use is the ****** little remote that came with it.
How do I fix this?
Notes:
AppleTV is synchronized with my iTunes library
Home Sharing on the PC is turned on
Remote App tells me to "turn on home sharing on the AppleTV from the Computers section of the Settings menu" but no such option exists.AppleTV1 doen't use Home Sharing. Try this:
Apple TV (1st generation)
Connect iPhone, iPad or iPod touch to a Wi-Fi network that is connected to the local network that your Apple TV also connected to.
Open the Remote app on your mobile device.
Select Add an iTunes Library in the Remote settings screen. Remote will then display a 4 digit passcode.
On Apple TV, select Settings from the main menu, select General and then Remotes.
Select the name of your iPhone or iPod touch.
Enter the 4 digit passcode. Use the volume up/down keys on the Apple Remote (Infrared) to change the number that is displayed and the track next/back keys to switch digits.
Click Done.
Remote app will be paired with Apple TV and you can begin browsing your library using Remote and select a piece of content to play.
http://support.apple.com/kb/HT1947 -
Hi I've just installed OS X Yosemite Version 10.10.2 - My Apple USB Keyboard will no longer work. Any suggestions? (iMac Retina 5K, 27inch Late 2014) Thanks.
Hi, thanks for the assist. Looks like there is a glitch in the new software, as I did as you suggested, removed other USB devices, powered off. Then plugged in the keyboard - re started and hey presto it worked. Thanks v.m.
-
cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?
Not sure about yahoo, but for gmail, I done the following:
Set up using Exchange on iPhone, it'll keep prompting for password. On PC use captcha option, log in to gmail account from PC after completingg captcha option, enter password on iPhone.
See how that goes for gmail, let us know.
Hopefully someone will have fix for yahoo.
Maybe you are looking for
-
How to make the document dirty after updating the links?
Hi, I am using the below code to update the link resources by providing new URI. The link resources are getting updated, but the document is not becoming dirty. InterfacePtr<ICommand> updateCmd(CmdUtils::CreateCommand(kLinkResourceSta
-
I have just installed iPhoto 08 on my iMac G5. I installed it 'over' the previous installation of iPhoto 6. What happens is this: I open a photo, experiment with some edits using the Adjust palette sliders, then zoom in by using the slider at the bot
-
I create a data grid with check boxes inside the cells of a certain column named "CheckColumn". In the class that implements the ICellRenderer are the code: public class CheckCellClass extends CheckBox implements ICellRenderer { .... stufffs....
-
Why can´t I download the new firmware?
Yesterday I have tried to download the version of firmware (ios 4.3.2) three times through the iTunes, but I received a message saying that my time connection has expired. How can I download the new version? ThiagoFreitas
-
Anyone have any ideas?