Installed Itunes 10.5.  I try to open Itunes is says Entry point not found.

I just installed Itunes 10.5 and restarted the computer.  Now when I try to open Itunes is says Entry point not found.  The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundation.dll.  I have tried to reinstall and repair Itunes 3 times and I still get the same prompt when I try to open up Itunes.  Can anyone help me fix this please?
Thank you in advance.

I hope this is of some help to you as I found it when trying to solve my own problems with 10.5
"Taken at face value, you've got a damaged Apple Application Support program file, balda. (iTunes needs a properly functioning Apple Application Support in order to work correctly.
On a 32-bit Windows 7 system, I'd try the following set of instructions:"
http://discussions.apple.com/thread.jspa?messageID=11901253&#11901253

Similar Messages

  • I can't install itune on Winxp. entry point not found.

    When i install itune on my computer. this box popped up.
    i even can't repair Apple Software Update in control pannel, add or remove programs. The same box poped up.
    The procedure entry point@tureport@initialization$qqrv couldn't be located in the dynamic link library commonforms.bpl.
    i have installed the newest Quicktime.
    who can help to solve this problem, thanks a lot!

    "Could not open key
    UNKNOWN\Components\DA42BC89BF23F5BD0AF18C3B9B1A1EE8\0DC8CB51B56A0D742ADD98A4295 F08A
    Verify that you have sufficient access to that key. Or contact your support personnel"
    Try the following user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

  • Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'

    Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'
    Please help...need to get newest update so I can activate my new IPhone4. Thanks

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Can't open Icloud. "The entry point not found".  Can't reinstall until I open Icloud and log out but I can't access it.

    I am trying to re-install Icloud, however I can't redownload until I uninstall Icloud, but I can't uninstall until I log out in the Icloud Control Panel.  The problem is that I can't open Icloud to log out because it says Entry point not found.  I'm having an issue with all aspects of this!

    I see you still have your smc0. I'm working on my first attempt at OSB and Oracle support said we have to remove rmt0, rmt1, smc0 before we can install OSB. They saw it in the device list and said those devices must already be taken.
    Is you setup working for OSB and regular mksysb & sysback too with the Atape.driver?

  • ITunes Helper.exe - Entry point not found error after upgrade

    I just tried to install the latest iTunes software for Windows on two separate PCs running XP Pro SP3 and get the same error on both PCs at every windows startup: iTunes Helper.exe - Entry point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll. Is this a known issue with a fix?

    Hmmm. Roy B has some advice on that one in the following post:
    http://discussions.apple.com/thread.jspa?messageID=10208523&#10208523

  • Itunes helper.exe entry point not found -

    Hi can anybody help - after having normal service and using itunes normally I now keep getting this message when I install itunes and I have no idea what to do - my ipod also appears to be unusable as it will not charge when plugged in to computer and do not know if it messed up the computer or if the computer messed it up. Have tried to install itunes many times but always the same message and it will only go away when I uninstall it. Any advice on next step appreciated. Thank you.
    Message is:
    'The procedure entry point GdipGetDC could not be located in the dynamic link library gdiplu.dll'

    Hello,
    Try working through the steps in this document, 1 by 1 in the order in which they are presented.
    http://support.apple.com/kb/HT1926
    CG

  • I cannot open firefox, error states entry point not found

    I can not open firefox, I downloaded an update and ever since, when I try to open I get the error message "no entry point found" What should I do?
    == This happened ==
    Every time Firefox opened
    == today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727; .NET CLR 1.1.4322; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Often that's caused by damage to one of the other software components.
    I'd try the following document first:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (If you're running XP, there's a link to the equivalent instructions for that OS in the document.)

  • Itunes 10.5 entry point not found error

    Just tried to update to 10.5
    getting this error
    "The procedure entry point AVCFAssetCreateWithByeStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dl
    Then when I click ok another window pops up that says
    "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)
    I tried reinstalling, did not work.

    Hmmm. Roy B has some advice on that one in the following post:
    http://discussions.apple.com/thread.jspa?messageID=10208523&#10208523

  • ITunes.exe : itunes The procedure entry point Not Found

    Can't open iTunes.exe On Window7

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • When I start my computer I get a "AppleSyncNotifier.exe Entry Point Not Found message.  I also get an error message when trying to sync with iTunes that a backup session cannot be started.  How do I fix this?

    In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
    It says:  "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
    I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
    "iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
    The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process. 
    Any advice????

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • WHEN TRYING TO DOWNLOAD THE LATEST VERSION OF ITUNES, I KEEP GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.dll was not found

    AFTER DOWNLOADING THE LATEST VERSION OF ITUNES, I CAM GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.DLL WAS NOT FOUND. UNABLE TO LOCATE COMPONENT. BEFORE I REMOVE THIS VERSION AND TRY TO RELOAD AGAIN, JUST WANTED TO BE SURE I WOULDN'T LOSE ALL 200 PURCHASED SONGS ON MY PC.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99220)

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • Updated to 10.5 on XP and now iTunes will NOT open - Entry Point Not Found - HELP!

    Tried to update to iTunes 10.5 on Windows XP.  Everything seemed to install properly and I restarted.  However, when I try to open iTunes, it will not open and I get the following error message:
    iTunes.exe - Entry Point Not Found
    'The procedure entry point AVCFAssetClassWithByteStreamAndOptions coulf not be located in the dynamic link library AVFoundationCF.dll'
    When I click 'OK' (which is the only option), it says:
    'iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (Windows error 127)'
    I have updated iTunes on my machine in the past numerous times without ever having an issue.  Now, I get this and cannot access iTunes at all.  I have tried reinstalling 10.5 and restarting my machine about five times now...to no avail.  I am hesitant to remove iTunes, since I have 6000 songs and do not want to lose my library.  Is there anything I can do?  Seems like it should be a simple fix.
    When I called Apple, they told me to upgrade my OS to Vista.  Huh?  That seems like overkill to me.  iTunes has always run fine on XP.
    Please help!

    I found another site and it suggested that I go through System Preferences and check downloads again.  The iTunes update was still there indicating that it still needed to be downloaded.  So I downloaded it again and now it works fine.  I hope this might help someone else.
    Thank you

  • My iTunes won't open on Windows XP. iTunes.exe - Entry point not found, Error 7 (Windows Error 127)

    When I open iTunes, I get a message saying under iTunes.exe - Entry Point Not Found, it says, The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. And I'm not talking about the AppleSyncNotifier.exe. Along with that, I get the message saying, "iTunes was not installed correctly. Please reinstall i Tunes." Error 7 (Windows Error 127). That's why I'm unable to open iTunes. I sure hope to see a solution to those problems soon.
    I know I've mentioned this before, but I've now given a little more info to make my explanation more clear.

    Try this one from Article TS3074
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074

  • Entry point not found after installing last update (itunes 11.1.4.62)

    itunes just prompted me to install an update, so I did.  Now I can not open iTunes at all.  I recive the following message:
    iTunes.exe - Entry Point Not Found
    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@VQTT
    rack@@@***@@$0A@VCrashOnOverflow@2@@***@@XZ
    could not be located in the dynamic link library :\Program Files
    (x86)\Common Files\Apple\Apple Application
    Support\WebKit.dll
    I have already tried to restart, and repair both iTunes and Apple Application Support.
    I had no problems prior to installing the latest update.  What can I do?

    iTunes.exe - Entry Point Not Found
    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@VQTT
    rack@@@***@@$0A@VCrashOnOverflow@2@@***@@XZ
    could not be located in the dynamic link library :\Program Files
    (x86)\Common Files\Apple\Apple Application
    Support\WebKit.dll
    Try the following user tip:
    iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

Maybe you are looking for

  • Batch date in iphoto

    I have used an Automator script to batch time and date in iPhoto when the usual methodology within iPhoto's batching did not work adequately. Can you help me with an Automator script and teach me how to install it for iPhoto to recognize it within iP

  • Displaying pagenumbers in table of contents in the 2nd page of a smartform.

    We have a requirement where we need to display "Table of contents" with headings and corresponding page numbers .The page numbers for the headings need to be picked up at run time.But the "Table of contents" is in the second page whereas the headings

  • Modify Approval in Performance Management to include employee agreement

    Hi, In the standard worflow processes in Performance Management in EBS HRMS, when an appraisal is submitted by the manager/main appraiser, it goes to a higher level manager for approval. I need to route the approval first to the employee and then to

  • Remove print marks

    I'm new at this - is there a way to remove existing print marks from a document?

  • Reinstate email address

    I was receiving automated emails from a company that has the title "Creative" in their name. To stop receiving them I applied a rule that said, If any of the following conditions are met: From...Contains...[email protected] Perform the following acti