Installed iTunes 11.0.4.4 64-bit but window 8 pro 64-bit in task manager reports that iTunes is 32-bit. Why? Not running in compatibility mode. Uninstalled and reinstalled. Same result.
Installed iTunes 11.0.4.4 64-bit version. Now windows 8 pro 64-bit reports iTunes as 32-bit in task manager. Why? Both my computer and operating system are 64-bit. ITunes is not running in compatibility mode. All my music files are MP3. I uninstalled iTunes and downloaded iTunes64setup.exe from apple and still having the same result. This was a clean install by-the-way.
Hello irie00,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario
Similar Messages
-
When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!
Taken at face value, you're having trouble with a QuickTime program file there.
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "QuickTime" and then click "Repair".
Does the repair go through okay? If so, are you able to launch iTunes and/or Safari now? -
Unresponsive, won't load, Uninstalled and reinstalled, same results.
In the last month this began to slow and act oddly. Using Windows 7 system. Explorer is operating normally.
Now I click on Firefox and nothing happens. Uninstalled the program and reinstalled it with no change in the outcome. What do I do?It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
Just installed itunes but when i try to open it this error message pops up: "apple application required" then it suggests uninstalling and reinstalling which i've done a few times but nothing works
When you say you have tried everything, it would help if you told us what you have tried to avoid duplication.
When you installed iTunes did you get any error messages?
Anyway, on the face of it it may be worth trying a separate install of Apple application support.
Uninstall iTunes again. Now open Apple Software update, assuming it is working.
It should offer to download iTunes. Don't do it yet, go to the Tools menu and select Download only.
Then download iTunes. Then go to the tools menu again and select Open download folder and you should see a collection of six files.
Before going on, can you get to this stage OK?
One further thing I would like you to check, are you ahving any problems with Windows updates? Could you check in Windows Update to see if there are any failures. -
After successfully installing the iTunes upgrade to 10.6.1, Now I cannot open and access itunes. I have tried a complete uninstall and reinstall and it is still not working. I have looked through many support communities for answers. I added an iPad 2 almost a year ago and all was fine until my upgrade to the "cloud services" and upgrade to new version. I have been without iTunes on my PC for a month. Any suggestions on how to resolve this issue?
I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.
-
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753) -
I recently installed Itunes on my laptop, and was able to add music to it, but then it would always pop up a window that said itunes had stopped working anytime I opened it. I uninstalled it, and reinstalled it, and it's doing the same thing. Please help!!!!
Check this document.
Error "Licensing has stopped working" | Mac OS
Try each step.
When you get to the license recovery kit, type sudo, leave a space and drag LicenseRecover.py into
the Terminal screen, then hit Enter. It should look like this:
Enter your password, but remember the cursor will not move. Just hit enter and let the script run. -
ITunes will not start, already tried to uninstall and reinstall
I cannot get iTunes to launch. I click on iTunes and it wont come up at all. It doesn't even appear in the task manager. I have tried uninstalling it and reinstalling and it does the same thing. I've looked at things in the apple troubleshooting to fix it but I can't fix it. Any help will be greatly appreciated.
I hope someone chimes in to help. I'm having the exact same problem. Won't launch - have, as you, tried to repair via iTunes 9.1. Uninstalled/reinstalled using option on iTunes 9.1 download. Uninstalled from Windows Control Panel, download and run 9.1 download. All don't help - results always same: won't launch.
-
Have gone to update and sync Iphones and Ipods and Itunes does not start up.
Both the sccbase.dll and slbcsp.dll failed giving the error "LoadLibrary("xxxxxx.dll") failed. - The specified module could not be found."
There's our likely culprits. We'd better try swapping them out on the PC.
(The instructions I'm about to give are quite possibly going to sound odd ... I'll explain what we're doing and why at the end of the post.)
Navigate to the C:\Windows\System32\ directory. (If you've set a different directory from \Windows\ as your Systemroot, look for \System32\in the alternate Systemroot rather than Windows.)
Can you see sccbase.dll and slbcsp.dll in there?
If so, drag each of them to your Desktop.
Now close the C:\Windows\System32\ window, wait about 5 seconds, and then open navigate to C:\Windows\System32\ again. Have copies of sccbase.dll and slbcsp.dll reappeared in that directory?
If one or both of the dlls aren't replaced and/or you get an error message from Windows saying you have a system file missing, move the dlls back into \System32\ from your desktop, and post back.
(What we're doing here is using XP's Windows File Protection system. It maintains a \dllcache where copies of essential dlls are kept on the PC. If it detects that a dll from \System32\ is missing, or has been replaced by an earlier version, and it has a current version of the dll in the dllcache, it will move a copy of the correct version of the dll into \System32\. There's more information about this in the following document from Microsoft: Description of the Windows File Protection feature.)
If the dlls are replaced, try restarting the PC and then relaunching iTunes again. Does it launch this time?
If it doesn't launch, try reregistering sccbase.dll and slbscp.dll again. Do they reregister properly, or do you get an error message again? -
I updated itunes today and now i have the following error:
MSVCR80.dll not installed
and itunes will not start at all
I uninstalled and reinstalled itunes, but keep getting the same message
Plus the message "Error 7 (windows error 126)"
can anyone help with this??Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
I have windows 7. Purchased Elements 12 and installed. Premier loads, Elements will not. Tried uninstalling and reinstalling without results. Just does not do anything!
Hi response to my above problem, I have been browsing the Adobe forums and have found a number of others who are experiencing the same problem as me.
Here are the links
http://forums.adobe.com/thread/776454
and
http://forums.adobe.com/thread/677258
It seems that the root cause of the problem is that Adobe workflows is not compatible with the newest versions of AIR (2.0.0 and above)
This should be something that Adobe can fix quite easily. Its not a good first impression for Adobe customers to have a fresh install which seems to not work properly.
If any Adobe representatives read this, I hope this issue will be addressed and a solution provided to the wider Adobe community
Mathew -
I have a windows 7 premium laptop, 64 bit driver, have tried to install itunes but recieve an error when trying to open. Error states "Apple Application Support is required to run itunes. uninstall and reinstall again, error 2 (windows error 2). have tried this 4-5 times with no success. help!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??
Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
After uninstalling and reinstalling itues according to instructions for Vista, QuickTime doesn't appear in my programs, I don't seem to have it anywhere, Isn't QuickTime supposed to be part of the Itunes installation? Is the absence of it why no ipod will function correctly for me?
Let's first try something relatively simple. Download and save a 64-bit version of the iTunes installer (iTunes64Setup.exe) to your hard drive. (Don't run the install on line.)
Now try right-clicking the installer file and selecting "Run as administrator".
Does that get you past the privileges errors?
Maybe you are looking for
-
Unable to load data store in a new model
Hi, I have Win XP Pro SP3. MS SQL 2008 which has adventure works DW2008R2 database. I have oracle data integrator. I have created a physical and logical schema and have established a connection with my MS SQL 2008 and the test connection is successfu
-
IPod on iPhone 3G won't play in my car after iOS 4 upgrade
I have a 2010 Hyundai and my iPod played fine w/ the use the the Hyundai iPod cable until I upgraded to iOS 4. I used to get the airplane mode warning but once it went away it always played fine. Now instead of the airplane mode warning I get "This d
-
I downloaded a book as a pdf in an app through iTunes, but I want to read it on my MacBook Air. How do I do that, please?
-
Can I set the text color in a Label?
Hi everyone ~ Can I set the font color in PP? I only found that there is a "setBackground".. but I want to set the color within a Label. Thanks! Gary
-
Stuck on moving bar and black screen?
Hi, I have a Toshiba Satellite A300 Series. Windows Vista. My laptop was working perfectly fine last night and when I woke up this morning, I turned it on and it was stuck on the Windows Corporation where the green bar is moving from left to right. I