Installed iTunes 7.1.1 and now won't play any CD/DVD

help!! i installed itunes 7.1.1 and now i can't play any CD/DVD, even the data ones. what should i do?? when i run CD diagnostics it shows up like this:
Microsoft Windows XP Professional Service Pack 2, v.2055 (Build 2600)
System manufacturer System Product Name
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
SiS 661FX
Connected Device Information:
DiskDrive, ST3802110A, Bus Type ATA, Bus Address [0,0]
CDROM, TSSTcorp CDW/DVD SH-M522C, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: TSSTcorp CDW/DVD SH-M522C, Rev TS06
Drive is empty.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: TSSTcorp CDW/DVD SH-M522C on -128(0xffffff80) media at speed 0X.

the motherboard is ASUS P5S800-VM
thank you kindly.
i find it a bit difficult to track down info for the ASUS motherboards at ASUSTek. so perhaps try using their ASUS Navigation utility to determine if there are any BIOS or chipset driver upgrades available for that model. here's a link through to their download site for the utility:
ASUS Navigation Wizard
if you still get the bad behavior from CD/DVD drives after doing any updates indicated at Asus, let's check on your other componentry too.
i had a look at Samsung, and there's a newer TS07 firmware available for your SH-M522C.
TSSTcorp SH-M522C
is that any help?

Similar Messages

I emptied trash with itunes in it accidentally and now can't play any songs on itunes what can i do?

so i needed to clear disk space so i could use imovie more, so i put a load of stuff in trash and emptied it, but somehow i stupidly put itunes there too, so now when on itunes i can't play any songs because it keeps asking me to "Locate" it, which i can't do because it doesn't exist anymore arrrggh! i can't use any of my songs on imovie either, it's very frustrating. If there is any way at all that i could recover the songs so i could play them on itunes then that would be great-
thanks,
Hamish

Hi,
If you don't have a back up, you have lost your music.
If you have iTunes Store purchases, you can go into iTunes Store and redownload previous purchases.
Jim

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work.

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work. I'm using a Windows Vista.

Hi there,
I've got a couple of articles that may help you out. This first one goes over how to properly remove and reinstall iTunes.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
This next one goes over some of the troubleshooting steps if you are having issues reinstalling iTunes.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Hope that helps,
Griff W.

I installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank

i installed itunes 11.1.3 and now my itunes store wont work - for example the movie list comes up blank- does anyone knw how to fix this?

Looks like blame is incorrectly placed. Turns out my iSCSI connector is struggling with Mavericks. When I placed the iTunes library on a local drive, everything came back to normal.

I have just updated my iTunes and it won't play any of my songs. What do I do?

I have just updated my iTunes and it won't play any of my songs, It will say that it is but the time does not move along and the sound does not play. I have uninstalled and reinstalled it but it hasn't worked. What do I do?

Hey B Noir!
Changing the 3D worked for me!
I am so glad that I ran across your post. I had been reading "solutions" to this problem all day, and most of them said to install/unistall/re-install itunes! No way! I knew there had to be an easier way, and you had it. Just a few clicks, and that was it.
Thank you for your help!
God bless.

I rented a movie from itunes on my ipad and now want to play it on my appletv, but cannot get it to show up. What do I need to do?

I rented a movie from itunes on my ipad and now want to play it on my appletv, but cannot get it to show up. What do I need to do?

If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer."
http://support.apple.com/kb/ht1657

I moved all my photos and videos from iPhoto to external hard drive and now can't play any videos. Please help!!!

I moved all my photos and videos from iPhoto to external hard drive, then totaly formated my macbook and now trying to play videos of external hard drive, but they wont play and they in "quicktime containers" and really small in size (50 - 150 Kb). Please Help!!! My misuse will kill me if find out that we have no more videos from our honeymoon...

I moved all my photos and videos from iPhoto to external hard drive, then totaly formated my macbook and now trying to play videos of external hard drive, but they wont play and they in "quicktime containers" and really small in size (50 - 150 Kb). Please Help!!! My misuse will kill me if find out that we have no more videos from our honeymoon...
You may need to prepare yourself for a "World of Hurt" from your wife...
Since the average 0.9 megapixel JPEG photo file of normal graphic complexity stored at a high quality compression setting is 125-135 KBs in size, I would have to assume any QT video files you created of more than a fraction of a second in duration were most likely saved as "reference" files to only be 50-150 KBs. Basically, a reference file is q QT (MOV) file that tells a video player how to play data that is still stored in its original source file container(s). For instance, you could trim and merge a number of files together and save the result as a "reference" file that takes up very little room on your hard drive. Or, you could post fles to a server and create a "reference" file that is small enough to be sent as an email attachment that plays the uploaded data on someone else's computer as long as they are connected to the Internet. Unfortunately, for these reference files to work, all of the resources referenced within the file must continue to exist in their proper locations in order to be found and played by the reference. Since you did not indicate what "but they won't play" really means here or how you actually "moved" your iPhoto library files to the external drive, I can only make some "educated guesses" at this point. (BTW: for future reference, iPhoto has a built-in function that allows you to copy your library to one or more back-up locations and then connect to them by default when iPhoto opens or switch source libraries at will within the opened application.)
If you created reference files and saved them to an external drive, you should be getting an error message telling you the app needs to know where the source files are located so the reference file can re-connect to the resource data. If the original files were also saved, then simple navigate to the source files in oder to tell the app where they are now located. If the source files were deleted as part of the reformatting process, then you are up the proverbial creek whithout a paddle with little or no hope of doing anything about this issue. (I.e., reformatting and then re-installing a system drive usually means you would have little hope of recovering the specific "lost" data you want as there is always a good chance that some of the data segments were overwritten during the process.)

.flv and .avi won't play any more.

I had all the relevant codecs and was able to play .flv files in QuickTime and in VLC Player and also .avi files.
I reformatted my MacBook Pro for unrelated reasons, and now since installing all the same codecs etc. I can't play .flv files and also I have .avi movies which play with no sound in QuickTime, whereas they used to before reformatting.
I have installed:
QuickTime Pro 7.5
DivX
XviD Codec 1.0
VLC Player 0.8.6i Janus (Intel)
Perian 1.1
Does anyone know why suddenly there is no sounds for .avi in QuickTime and .flv won't play at all in QuickTime, VLC or the DivX Media Player whenever it used to work fine? I don't want to have to install more media players.
Cheers.

Same problem as Somhairie...
But only .flv files won't play. More exactly I've lost the sound.
despite what you say, Toronto..., I had the same codecs installed as described by Somhairie and it worked fine before I reinstalled all OSX.
Some new ideas someone ?
thank

Installed iTunes 9 as advised and now I can't access store

Hi, just installed iTunes 9 and advised when trying to purchase a film and now I can't access the store. I can access my account etc but just get a blank screen when trying to access store! Have tried technical support but they say it's my computer's problem. Why? when I was on the iTunes store 10 minutes previous! Have limited computer knowledge but any help would be appreciated as I'm about to be flying and need some new films!

I have exactly the same problem. I haven't had access to the iTunes Store since upgrading to 9.0.1 nearly two months ago and none of the suggested fixes have worked for me. I use iolo as my firewall. Does anyone have any ideas?
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Computer Corporation Dimension 4300
iTunes 9.0.1.8
QuickTime 7.6.4
FairPlay 1.5.18
Apple Application Support 1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number
Current user is an administrator.
The current local date and time is 2009-10-29 07:43:00.
iTunes is not running in safe mode.
Video Display Information
NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
** External Plug-ins Information **
No external plug-ins installed.
iPodService 9.0.1.8 is currently running.
iTunesHelper 9.0.1.8 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {E6040F81-0D24-49D2-BF10-A1C14EF963E4}
Description: 3Com EtherLink XL 10/100 PCI For Complete PC Management NIC (3C905C-TX) - Packet Scheduler Miniport
IP Address: 99.141.197.14
Subnet Mask: 255.255.255.0
Default Gateway: 99.141.197.15
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Thu Oct 29 07:41:34 2009
Lease Expires: Thu Oct 29 07:51:34 2009
DNS Servers: 192.168.0.1
192.168.0.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2009-10-29 07:28:11.

Installed iTunes on new Vista 'puter now won't reconize iPod Touch

I installed iTunes on my new Vista 'puter and it wont reconize my iPod Touch, it does reconize my 3rd, 5th and clasic iPods but not the touch. it is reconized by windows but not iTunes

After searching the internet for hours, due to having the same problem I finally found a solution
1) plug in the ipod and go to START then RUN and type in devmgmt.msc
2) the device manager should come up, then go to imaging devices(Has that sort of name i dont remember its exact name) and hit the plus and it should say Apple Ipod.
3) Right click and select Update drivers.
4)Select "Update from a specific location" and then hit browse
5) then select C\program Files\Common Files\Apple\Mobile Device Support
6) hit ok and it should have worked.
thank to Abnormality
I hope this help,

Song did not install properly and now won't play

I pre-ordered an album, and when it came round to installing it, I was in an area with a weak internet connection. At one point during installation, the internet signal temporarily cut out, causing the song to not install properly. I have a few seconds at the beginning of the song that has the audio in it, but after that the song stops and does not play any more. I need to know if there is a way to reinstall the song, or redeem it some other way. I have tried to create an AAC version of the song, but an 'unknown error (-3)' message appears. Is there any way I could reinstall that one song?

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music (or if it re-downloads with the same problem) then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Just updated to iTunes 10.2.1 and now can't add any new songs.

My MACbook is running 10.5.8 and just last week I updated to iTunes 10.2.1 but now I can't add any new songs at all. I go through the motions but when I check the "recently added" checklist, it's blank. The song is never added to my iTunes library. Is there a fix for this?

RESOLVED.
I tried updating iTunes to 10.2.2 thinking this might somehow help me but same situation. Upon further investigation, the set of MP3s I was trying to add didn't have the typical MP3 logo on them. When I tried to delete them from my system, it said "in use by application". I forced a delete. I copied the MP3s again to my MACbook and this time was successful in adding them. Looks like it was a bad set of MP3s and not iTunes.

Backed up itunes to a hard drive, now we cant play any of our music unless harddrive plugged in. And we cant drag any music onto devices! Please help, thanks.

Hi there
Our desktop computer was painfully slow so backed up everything to hard drive (as 1 file) and did factory restore to computer. We have managed to get our photos and documents back to our pc but have struggled with itunes. We now have all our music there in our library but can not play any of it unless the hard drive is plugged in (says cannot locate the file when not plugged in). I manually consolidated files for one album which now means it will play without hard drive but I can't drag that to our iphones & ipods. Please help! Thanks.

*Also...is there any way I can filter out all the tracks with the ! so I can delete the unplaying copies as they're taking up room in my iTunes? I know how to find duplicates, but then I have to go and delete each one individually...*
*Thank you!*

I recently installed Java 6 update 33, and adobe flash player 11 plugin, and now can't play any videos from any website in Mozilla, but Google Chrome works.

Cannot play any video from any website in Mozilla after installing Java 6 update 33, and adobe flash player 11 plugin. However, I can play videos from Google Chrome and also from Internet Explorer. For example, when I'm trying to play a you tube video in Mozilla, a black screen comes up with following error message: "An error has occurred. Please try again later."
(This is like the Wizard of Oz -- when the man comes to the little window in the door and says to Dorothy, "Come back tomorrow." )

This may be caused by a recent Flash 11.3 update.
See:
*https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
*https://support.mozilla.org/kb/flash-crashes-or-does-not-load-firefox-13
*http://forums.adobe.com/thread/1018071?tstart=0
*http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

I just upgraded to firefox 4 and it won't play any videos on the internet. Is there a fix for this or how can I go back to the previous version.

my firefox 4 wont play any videos. adobe flash player says its not compatible with this arcitecture. Did anyone bother to test this before releasing it.

I appreciate you taking the time to respond, but I don't want to uninstall my persona. I want to uninstall FireFox 4. I love my persona.
It really bugs the crap out of me when FireFox sends these upgrades around and I click "yes" to install them then my entire desktop stops working.
Is it always necessary for their upgrades to render the add-ons that people develop useless?

Installed iTunes 7.1.1 and now won't play any CD/DVD

Similar Messages

Maybe you are looking for