Installed iTunes on a new PC (Windows7) and when connecting iPad get no response at all.
Just aquired a new PC preloaded with Windows Home Premium. Installed iTunes and when I attached my iPad there got a message "Trust/Don't Trust Computer", clicked "Trust". However, the iPad does not show up in iTunes and I do not understand why. Can anyone help?
Processor is Intel G3250 3.2GHz, 4G memory, 64 bit OS
Hi sheila6,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like an iOS device is not showing up in iTunes. I would recommend that you read this article, it may be able to help the issue.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Cheers,
Mario
Similar Messages
-
I had to install a new hard drive on my system and download itunes again. When I synced my ipod it duplicated a bunch of songs, how do I fix this problem?
wait until you reach the limit of five authorized machines. then, once a year, you will be able to deauthorize all machines, following which you can reauthorize those computers you currently use/have access to.
click here for more information. -
im trying to install iTunes on my new hp com and it keeps coming up with error code HRESULT:0x80070BC9 what do i do?
HRESULT: 0x80070BC9
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070BC9, or some other number? (If they're another number, what number are you getting?) -
Having loads of trouble installing itunes on my new samsung laptop keep getting this message when i try to run the download .
This installation package could not be opened verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid windows installer package please help i am close to brakinTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a new laptop, and have copied over my existing itunes libary, but when i connect my ipad, and go to update the software to the new version it warns me that it will wipe all my apps etc..... How can i stop this from happening and make my new laptop the "home" for my ipad??
Any help gratefully received! :-)Macs use an application called Migration Assistant to copy material from the old Mac to the new one. The macs are connected together and each runs Migration Assistance and the user chooses what stuf to copy onto the new Mac.
Unfortunately I do not know how to do this between pcs or between a Mac and a Pf or even if it's even possible. -
Problem is when I select a song in my library, it skips down the list and never plays the one I first selected.
thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess.
That would convenient, but sadly it is not the case. Sorry!
Either way your welcome and best of luck!
B-rock -
I need help trying to get my Macbook Pro 13 to bootup.
The software that comes from the factory, pre-installed has always only contained the drivers for that specific model and no others.
If you want to install on a different model Mac, you need to have the original installation DVD or go back to Recovery_HD and download again.
Your 13" and 15" have somewhat different Hardware, and you need the correct version for that model or a purchased or downloaded version to proceed. -
i just installed itunes on my new laptop in the sync with my itouch all the music was transfered over but not the play list do i have to do it manually or can i only use this one computer to use those playlist i am content with only using this laptop but how do i get them over .and is it possible to have this itouch connected to both of my laptops. i know its a lot of questions but then again look at my sign on name,lol
First and foremost, learn punctuation and capitalization so we can read what you're writing properly.
-
Since I last updated my phone and installed itunes on my new laptop, all the songs I purchased (and spent alot of money on) wont play on my phone or itunes on my laptop.
thanks for the reply
it looks as though i have to download them all again because next to each song on both my phone and laptop there is a cloud with a red arrow.
i installed the itunes, then plugged my phone in and followed all the instructions- the itunes on my laptop shows all the songs but still has the cloud symbol -
I have installed iTunes on my new laptop OS Windows 7. I have two iphones, a 3rd gen nano and an ipod classic.
Since the install yesterday I keep getting an error message which itunes has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a soluion is available.
I have un and re installed and followed a command promt reset.
I still have the problem. Any ideas?Ok. So I created a new account and iTunes did work. I went back into my original account and tried again and just to be more clear, after I open iTunes it asks me to accept or decline the agreement, I do that, then it says "updating library", and then one all the bars are full it closes and says "iTunes has encountered a problem and needs to close."
okay, let's start working through the user-account-specific causes of this message.
one possibility is damaged itunes preference files in the user account in which you're getting the crash. (there's a different set of those in each different user account, which is how we can get crashes limited to a single user account.)
if that is what is going on, we can often get past this by rebuilding the preference files in the account that is crashing. for the preference files rebuild technique, see my reply to kusma in this post:
b noir: Re: iTunes 7.0.1 crashing -
When I try to install iTunes onto my new computer, it says "This installation package could not be opened. Verify that this package exists and that you can access it or contact the application vendor to verify to verify that this is a valid Windows Installer package." I can save iTunes onto my computer, but when I click run, this is the message that appears. How do I get this thing installed?
Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D. -
I just instaled itunes on my new Dell computer operating system-Windows 7. The majority of my music-purchased from itunes and my CD's will not play. Help!
I just instaled itunes on my new Dell computer operating system-Windows 7. The majority of my music-purchased from itunes and my CD's will not play. Help!
-
when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I recently installed iTunes on my new HP laptop computer, authorized it according to the instructions, but now can't get past a screen that tells me that I need to authorize the computer. I purchased an album and it's in the library, but it won't sync.
Have a look here...
http://support.apple.com/kb/TS1389 -
Okay i had to install Itunes onto my new OS because window's Vista messed up on me and i can't get any of my old purchases back from my account such as music and movies any ideas on how to get them back (i do not have the folder that contains old items from the last itunes or anything from that OS because it had a virus and i just wanted windows 7)
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Hope this helps,
JD
Maybe you are looking for
-
IView in New Window - fully maximised
Hi I am using EP 6.0 I have several iviews created. When i click them, they open in a new browser window but this new browser window is not maximised. I want that the new window should be maximised to the full screen size. I have tried chanding the
-
Indesign CS3 crash while generating an PDF or deleting an index entry
Indesign crashes when I will starting the PDF export. This happens in all Indesign documents which are converted from CS2 and with index entries. So I want to delete the index but Indesign crashes while deleting too. I tried to convert the files in .
-
hi, backgroup: i've changed my primary db from archivelog mode to noarchivelog mode when some problem happend which cause the arch generated about 1G data within two minutes that lead to disk space used up within few hours, i've recovered the primary
-
Question on SDN (general not abap)
Hi.... Sorry for wasting your time with general question... Please tell me how to open the diffenrent blogs in SDN? like... The SQL Trace (ST05) Quick and Easy is for to study ST05... Thanks, Naveen.I
-
Hi, Is there any way to change the color space of the Web Galleries made by Aperture from Adobe-RGB to sRGB without exporting the photos separate first. I'm also missing an adjustment option to set the image quality in the Web Gallery. Regards, JO ht