Installed languages

Hi people,
I´ve the next problem with the languages. I´ve installed the additional language and after I completed the setup with the supplement language with the english.
I have indicated the parameters of the system:
zcsa/installed_languages                    DSE  
zcsa/system_language                        S
zcsa/second_language                        E
But I can see in someone tcode that texts appear in German language, but I´ve indicate the second_language with the english.
What can i do?

Does it happen in more than 1 particular transaction?... have you seen any other texts in english rather than german?...
Basically if supplementation is done correctly, any transalation that is not found in spanish will be supplemented with english, so if its showing german in one particular scenario it will be easier to isolate or even open a support call, in the case that is showing german in more than one place, then most likely you had an issue while setting the supplementation language.
Regards
Juan

Similar Messages

  • Terms of Payment in not installed language

    Hi experts
    We only have installed language package DE and EN.
    But now we would like to maintain terms of payment in Russian (only for print).
    Therefore I go to SPRO->Sales and Distribution->Master Data->Business partners->Customers->Billing Document->Define Terms of Payment->GotTo->Translation
    After that I can select DE and EN, but not RU.
    Is there a possibility to maintain terms of payment in Russian WITHOUT installing RU-language package?
    Or maybe, there is a way to maintain the text-table TVZBT.
    Thx a lot in advance
    Christian

    Hi,
    you can maintain entries in table TVZBT using transaction SM30 only if the "Data Browser/Table View Maint." value is set as Display/Maintenance allowed for the table (Check using transaction se11 --> Delivery and maintenance tab). You can change the value to "Display/Maintenance allowed" if you want to maintain entries using SM30. Make sure that you assign an authorization object so that the table entries can be added only by authorized persons.
    If the above option is not feasible
    Create a Z-table(Same as TVZBT) with fields Paymnet terms, language and description. Access this table through smartform to print the description in different language.
    Make sure that the Z-table is updated while creating/changing any payment terms. By this way you can maintain any languages.
    Hope this solves your issue.
    Thanks
    Arun

  • Windows 8.1 Install Language Packs Offline

    I am looking for some kind of documentation or guide on creating a language pack package, and adding it to the task sequence for deploying Windows 8.1.  I have the language pack Cab file, and a custom HTA for creating a variable that I know works, but
    I cannot get the language pack to actually install.  I read another post that suggested the location in the task sequence to put the "Install Language Packs offline" just before the "Setup Windows and ConfigMgr" but it is not working.
     The task sequence does complete successfully, but the LP is not installed.  I have a base Windows 8.1 Pro customized image.  I am using SCCM 2012 R2 with MDT 2013.  
    The package only contains the Cab file, and doesn't have any programs associated with it.  
    Any help is appreciated.

    Hi Tyler,
    Please have a look at the blog below that deploying Windows 7 language packs with SCCM OSD. It creates a custom XML file that knows to load the language pack.
    http://sccmguy.com/2011/07/02/how-to-deploy-windows-7-language-packs-with-sccm-osd/
    Note: Microsoft provides third-party contact information to help you find
    technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Best Regards,
    Joyce

  • JOB error: "Select one of the installed languages"

    Dear all,
             if we execute some standard program/function in background mode the job stops with the following error:
    " Select one of the installed languages ".
    If we execute the same standard program/function immediately after the above error all run without error.
    We have the following patches level:
    SAP_BASIS          700          0017     SAPKB70017
    SAP_ABA               700          0017     SAPKA70017
    PI_BASIS                         2006_1_700     0007     SAPKIPYM07
    ST-PI               2005_1_700     0006     SAPKITLQI6
    SAP_BW               700          0019     SAPKW70019
    SAP_AP               700          0014     SAPKNA7014
    SAP_HR               600          0007     SAPKE60007
    SAP_APPL          600          0014     SAPKH60014
    EA-IPPE               400          0014     SAPKGPID14
    EA-GLTRADE          600          0014     SAPKGPGD14
    EA-RETAIL          600          0014     SAPKGPRD14
    FINBASIS                         600          0006     SAPK-60006INFINBASIS
    EA-PS               600          0014     SAPKGPPD14
    EA-FINSERV          600          0014     SAPKGPFD14
    EA-HR               600          0007     SAPKGPHD07
    EA-DFPS               600          0014     SAPKGPDD14
    EA-APPL               600          0014     SAPKGPAD14
    Any help?
         Gino Bonfiglioli

    Hi Rohit,
                thank you for your help
    Every job that stopped show the following error:
    Date           Time      Message text                                                                   Me. cl. Me no. Me. ty
    07.05.2009 09:24:55 Job started                                                                          00      516          S
    07.05.2009 09:24:55 Select one of the installed languages                                     00     171          E
    07.05.2009 09:24:55 Job cancelled after system exception ERROR_MESSAGE      00     564         A
    I looked for any SAP notes but I didn't find the right one.
    Gino

  • After installed language for solaris, how to use it in Netscape

    After installed languages for solaris,
    How can I see them in Netscape:
    View/Character set/...
    Do i need to modify some files?
    Thanks
    Joanna

    Hi,
    Not certain what your external system is, but it may be worthwhile to go through the QM-IDI documentation to see if that meets your requirements
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/26/b43927506511d182c20000e829fbfe/frameset.htm
    Alternately, take a look at BAPI_INSPOPER_GETDETAIL to determine how the lot expects to receive results, and BAPI_INSPOPER_RECORDRESULTS to set the results accordingly
    Regards,
    JL

  • How to declare installed language

    Hello people,
    I have installed in the system the french,portuguese and spanish languages. How to declare them in the parameter ZCSA/installed_languages?
    More thanks

    Hello Sergio,
    Change Installed languages to include (The default value will be DE where D- stands for German and E stands for English)
    Change the value by    zcsa/installed_languages = DEFPS
    Now this means that D- stands for German, E- stands for English and , F French, P stands for portugese, S Spanish.
    The users while logging in will have to give in the logon language field "PT"
    Change to desired language for logon screen (like French)
    zcsa/system_language = F
    you must restart SAP to activate these settings
    Regards,
    AK

  • Install language pack failure

    hello 
    i have this error when i try to install language pack 
    any idea please 

    it's OK , i have changed the alternate access mapping to http://locahost. 

  • Windows 7, ultimate or enterprise edition can we install language pack easily ?

    in windows 7, ultimate or enterprise edition can we install language pack easily ?   

    Hi Sumit,
    We could take use of Windows update or download from the following page:
    http://windows.microsoft.com/en-HK/windows/language-packs#lptabs=win7
    For install language packs using Windows update, please see:
    Install language packs using Windows Update
    Best regards
    Michael Shao
    TechNet Community Support

  • Installing Languages & Light Sensor

    How can i install languages on my phone....
    currently i am having only english.....
    I'm only able to type in english.............
    And another question is what is the use of Light Sensor on my phone....
    Some say that it blinks blue......but where to turn it on?
    I have seen in some phones like nokia n73 blinking.........
    my phone model is nokia e5-00

    I've never done it myself, but the only way I know to add languages is through Nokia. Do you have a local service center/Nokia Care point?
    The Light Sensor setting on my E73 controls the brightness of the screen and the keyboard. The Light Sensor hardware decides if the keyboard backlight switches on. I used to think it also gave the screen more brightness in dim light, but don't think that's true anymore. It's possible the functionality differs between phones or firmware, but I know mine has never glowed.

  • Need to install language pack on reference machine before capturing image?

    we have captured image via MDT 2013 using sysprep and capture method so how integrate or add language pack? need to install language pack on reference machine before capturing image?

    You don't HAVE to install them on the reference machine. Here are some examples, both online and offline:
    http://www.windows-noob.com/forums/index.php?/topic/3251-customising-windows-7-deployments-part-4/
    http://scug.be/sccm/2013/01/04/how-to-install-windows-7-language-packs-online-during-osd-task-sequence-or-in-your-hybrid-base-image/
    https://sccmentor.wordpress.com/2013/06/11/add-language-packs-to-an-offline-wim-file/
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Changing install language?

    Hi all,
    Does anyone know how to change the default instal language for ADE? I'm currently working in Holland and the download Flash screen is set to Dutch. I don't want this and wish to reset to English. So far, I've been unable to find anything to help me make this change. Any help much appreciated!
    audere1882

    Go to system preferences/language & text   (gear wheels icon, un flag icon)
    Click on tab at far left
    Move English to top of the list
    logout/login or restart

  • How can I change the installed language of my Creative Cloud applications?

    Hi.
    I installed Creative cloud a while ago, but now i want to change the language in the programs. I thought my native language would be good, but when im used to English in the programs, it´s really no good. :/

    Creative Cloud Help / Adjust the install language | Creative Cloud applications | CCM -
    http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

  • Select one of the installed languages- Idoc stuck in sm58

    Hi,
    We have observed a strange issue during testing.
    Some interface Idocs going from R/3 system to XI got stuck in sm58 with error
    Select one of the installed languages
    Later it was found that language EN was not specified in RFC destination and in the user profile which was being used in this RFC.
    It was fixed and interface was working fine.
    What  I was not able to understand was why other interfaces were processing Idocs successfully using the same RFC destination?
    regards,
    Anirudh

    Hello,
    Are your other interfaces still using the same RFC destination and port to PI , or do you have differnt? if different that could explain your issue.....

  • RFC_ERROR_COMMUNICATION:     Select one of the installed languages

    Hi Experts,
    When I try to test the JCO Connection created for ESS.
    name : SAP_R3_SelfServiceGenerics.
    I am getting the error message like below:
    com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION:      Select one of the installed languages
    If I try to edit the same,I am getting Null Pointer Exception.
    Can anyone help me out to resolve this error?
    Regards,
    Karthick

    Are you using an LDAP as your UME, or are the user records from from R/3 ?
    Apparently  (Ive never done it) you used to be able to force a default language by editing this file (back in the EP5 days):
    <J2EE root>\WEB-INF\portal\system\properties\prtDefault.properties
    Look at the following lines :
    This is the default language to be used when none is specified
    request.defaultlanguage=en
    request.defaultcountry=us
    If you prefer to have the same language for all users no matter their user locale, change the lines to this :
    This is the default language to be used when none is specified
    request.mandatorylanguage=en
    request.mandatorycountry=us
    I hope this works out for you

  • Message: "Logon failed. Details: Select one of the installed languages".

    Hi all,
    In Crystal Reports 2008 (version: 12.1.0.892) I want to make a new connection to our SAP ECC system (SAP Table, Cluster or Function). The available SAP systems as defined in my SAP Logon appear and I choose the ECC system. After entry of Client, Username and Password an error message appears:
    "Logon failed. Details: Select one of the installed languages"
    I'm quite sure the system tries to make the login in Dutch and that language is not installed in SAP ECC (just English and German). However, Crystal operates fully in English. Has anyone an idea why the login takes place in Dutch and how the language can be changed at login?
    Thnx in advace,
    Henk.

    Hi Chris,
    I am facing the same problem from Crystal Reports. I tried changing the locale as you instructed, but could not resolve the issue.
    The difference here is, it was working perfect until a week before.
    Appreciate your help on this.
    Thanks & Regards,
    Munir

  • SMQ1 in ECC  sysfail (select one of the installed languages)

    Hello Gurus
    in our ECC system we are having sysfail error status  in T code SMQ1 (select one of the installed languages), how to over come this
    inputs are highly appricted

    Hi Sreeram,
    For the faster response you should be more specific. As you mentioned SMQ1 i.e. you are having issue in ECC outbound. You should also mentioned the queue type, i.e. the queue is for BP, material etc... and the error message details, message class, message number.
    Search service marketplace with the details and you should be able to find some oss note.
    Thanks,
    Vikash.

Maybe you are looking for