Installed larger 10.5.1 update 100MB

And now permission repair just hangs. Shows 1 minute remaining on progress bar and does nothing. Let it sit for 20 minutes with no progress - no change. Did this update address permission repair or is this still an issue?

Powerbook 1.67 15" 2 meg ram. Installed 10.5 day after release. Had meltdown. Advised to replace HD - did so myself. Kept old HD and put in enclosure. Tried to incorporate a bootable SuperDuper backup to newly installed Leopard on new HD - worked to an extent, but was unable to open any files (Leopard reported unauthorized permissions) Found tip here to get tinkertool system and corrected all bad migrations. Have access to files now although it will take me another couple of weeks to get files ordered again. Anyway - decided to try to stick with Leopard and grow with it. Finding mostly nuisance bugs now. Hard to tell if its the OS or the applications. **** I miss Tiger, but I am not going through another OS transition. I'm here for the duration now.

Similar Messages

  • Acrobat XI installed and runs but cannot update or register?

    Acrobat XI installed and runs but cannot update or register? typical fixes don't work or apply. Seems to be a very peculiar situation. Any thoughts?

    Anubha,
    If I open acrobat 11.0 and click on Help before I open a file, there is no choice of Product Registration.
    If I open a file, and click on Help, there is a choice for Product Registration, but it is transparent and cannot be selected.
    If I close that file but keep Acrobat open, a large dialogue box will pop-up asking me to register, and when I proceed, and after about 2-3 minutes, I receive another pop-up saying to check my connection and retry. I can
       retry over and stay in this loop. But when I close the registration pop-up and go back to Acrobat, the Product Registration selection under Help is no longer transparent, and I can select it. But when I do the Registration dialogue box returns, and when I proceed, I get the same no connection-retry pop-up and the loop continues.
    In fact, I have done just now, what I describe in the sentence above, in the time between what I typed above and what I am typing now in my open browser window.
    If I click on Help and select Adobe Help, a new tab opens in my browser showing Acrobat's Help page, as it did, just before I typed this sentence.
    If I click on Help and select Online Support, and then select Knowledge Base, it takes me to a new tab in my browser which is the same web page as I get when I press F1.
    I have selected 'Repair Acrobat Installation' from the Help menu twice and gone through the process with no change in outcome.
    If I click on Help and select Check for Updates, it seems to be updating, then stops the process, and I get the Registration pop-up, and the same thing.
    This seems entirely bizarre.
    What do you think?
    Michael

  • Just installed new 10.8.5 update and my 15" MacBook Pro display is now turning off on it's own.

    I installed the Mountain Lion OSX update today, and I saw in the notes that this update was supposed to address an issue with the retina displays just shutting off, which is a problem I have not had with my new laptop. Now mine IS shutting itself off, and no amount of button punching can turn it back on before it wants to. My MacBook Pro is a 15" build 12F45, 2.7 GHz i7, which I purchased only in August. The screen just goes black at any time, pretty much every few minutes!!! *** APPLE?!!!
    I am a designer working on 2014 products, and this is a VERY crucial time for me. I am so frustrated, not only did the iOS7 update completely ruin my iPhone 4S, which has NO battery life anymore, (is it because of the LAME paralax effect always running? - plus I consider the interface intensly ugly) but now I'm going to be put out of buisiness?!!! C'mon APPLE!! I've only owned apple computers and products since 1998, and I'm thinking I may be FORCED to change now since there is an obvious and serious problem with the integrity of their OS updates as of late.
    Whew, now that I've vented, is anyone else having this problem? Any idea how to fix, short of uninstalling and re-installing EVERYTHING from an old backup BEFORE this latest update?

    Step 1
    Reset the System Management Controller,
    Step 2
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Attempted to install AirPort Utility 6.0 on my new mac mini. Install failed and now the previous version 5.5.3 won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 AirPort Utility still won't open? Help.

    Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
    iTunes no longer recognizes my airport express.
    Error Message:
    None of the selected updates could be installed.
    An unexpected error occurred.
    Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
    Any sugestions?

    I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.

  • I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    Hi
    Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
    And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
    I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

  • After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

    After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this?  I have tried uninstalling and reinstalling itunes.  I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

    The problem is with version 10.4.1.  I had to reload 10.3 to get it to work.  The recommendation from a previous poster worked for me.  Here was their list of steps:
    Go to Control Panel>Programs>Uninstall
    2.  Uninstall the following Apple programs in the following order:
         a. iTunes
         b. QuickTime
         c. Apple Software Update
         d. Apple Mobile Devices Support
         e. Bonjour
         f.  Apple Appllcation Support
    3.  Reboot PC
    4.  Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
    If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes.  To correct this:
    5.  Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
    6.  Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
    7.  Copy and Paste this file back into the iTunes folder
    8.  Rename this "iTunes Library (date).itl" file by removing the date.  It should say "iTunes Library.itl"
    9.  Reboot PC

  • I can no longer open any attachments that are sent to me. I click on and get cannot preview (but have had this for ages). I am clicking on download and nothing happens. It does not download. I clicked to install a new version after updating and clicking r

    I can no longer open any attachments that are sent to me. I click on and get cannot preview (but have had this for ages). I am clicking on download and nothing happens. It does not download. I clicked to install a new version after updating and clicking repair. But still the attachments won't open including invoices I have received today. It is all attachments not just pdfs.

    Angela Richens wrote:
    It is all attachments not just pdfs.
    Then most likely it is not caused by Adobe Reader.
    Anyway, perhaps someone has some idea, if you give us some details: operating system, browser, email client, ...

  • After installing the most recent iTunes update/version iTunes will no longer run on my PC.  I receive a window with the Microsoft error code R6034

    After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7).  I receive multiple error windows with the Microsoft error code R6034.  Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest".  I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted.  The site instructs the viewer to contact the application developer.

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • HT4528 My Iphone4 is no longer opening in iTunes.  I have Windows 7.  I uninstalled and re-installed iTunes and also added updates to my iPhone.  What should I do?

    My iPhone used to work in iTunes but quit working.  I checked my USB portal and it works with other devices.  I also uninstalled and re-installed iTunes.  I added updates to my phone and re-booted it.   I am not sure what else to do.  My iPhone also locked in vertical position and no longer goes to horizontal. 

    diesel vdub wrote:
    Maybe it would have been a better idea to confirm that iTunes is supported in Windows 8 before buying a computer with that Operating System.
    There will be a new version of iTunes released this month... no one forced you to upgrade prior to a supported version of iTunes being released.
    Like the fact that you just called most of us stupid there

  • After I installed the windows 8.1 update, podcasts and music won't play

    After I installed the windows 8.1  update, itunes stopped playing. When I try to play, it brings up the  song but stays at 0:00. My subscribed podcasts still download but they  all stay at 0:00 too. I can click on a later point in the song/podcast  and it moves to that point but just stays there as if it is paused but  indicating it is playing in the controls.
    I  have unistalled/reinstalled itunes and have the same problem.

    Hi there Juniorm1,
    Take a look at the article for the current version of iTunes for Windows.
    iTunes 11.1.5 for Windows (64-bit)
    http://support.apple.com/kb/dl1615
    -Griff W.

  • Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

    Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
    I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
    KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
    At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
    I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
    I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537  HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
    If you need more details, please tell me & Thanks in advance

    Checkout this Microsoft article: http://support.microsoft.com/kb/976982 
    It has some resolution steps that may help.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Install oracle 9i on linux4 update 8 x86_64bit

    Dear Members
    i have installed oracle 9i release 2 on on linux 4 update 4 32 bit successfully.
    now i want to install oracle 9i on linux4 update 8 x86_64bit.
    is there any parameter or rpm changes? or same as 32 bit?
    please help me out
    regards

    Hi,
    I think you need to Install patch *5386899* on 64-bit machine.
    Refer:http://www.puschitz.com/InstallingOracle9i.shtml
    Regards,
    X A H E E R

  • Unable to install Camera RAW 8.5 update

    Hi...
    I'm trying to update my Photoshop CC camera raw to the latest version 8.5.
    Every time I install the ACR 8.5 update. It is stated as successful. But when I open a raw file, I can see that it is still 8.0.
    I have tried uninstalling everything, ie Photoshop, Bridge & CC desktop app, than reinstall. But the outcome is still the same.
    I'm using Windows 8.1.

    Hi,
    You can try this link:
    Camera Raw 8.5 and DNG Converter 8.5 now available

  • My Creative Cloud Desktop app closes suddenly when loads palicativos installed. I can not update my apps. What i do?

    My Creative Cloud Desktop app closes suddenly when loads palicativos installed. I can not update my apps. Already reinstalled the desktop app CC often using adobe cc cleaner. It does not uninstall the normal way. What do I do? I can not contact anyone here in Brazil. I've tried phone, facebook, email and chat.

    Hi etges,
    Kindly check the below mentioned link and revert if problem persists.
    Link:  CC applications crashes immediately after launch
    Thanks,
    Atul Saini

  • After installing Reader 11.0.07 update on my Mac OS X 10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen.  This never appeared before and I am concerned that my computer is being hacked into

    After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen.  This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus.  Is this normal or do I have to uninstall this update?

    After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen.  This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus.  Is this normal or do I have to uninstall this update?

Maybe you are looking for