Installed latest iTunes now Firefox very slow
I installed the latest version of iTunes. Now when I use Firefox getting to sites very slow. I'm talking about just common ones like Yahoo or Facebook.
Also noticed my Dropbox won't connect from PC.
Nothing else changed.
Running windows 7.
iTunes 12.1.0.71
Gary
Refer to these articles:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Similar Messages
-
New Firefox Very Slow Bookmarks all gone restore not working Can I get them back?
Woke up today to new firefox update installed. Now Firefox VERY slow & all of my Bookmarks are gone as well as Bookmarks Toolbar empty. IE runs fast like usual, but Firefox barely loading.
Tried Restore from available dates, but all come back unable to process.Some of you will want to shoot me; Mozilla may yank this reply. BUT I had the same problem for about a week, struggled in vain, poured over the help section and got 3 replies to my posted question. Nothing, absolutely nothing worked.
Want to know what solution I finally came up with? '''''CHROME.'''''
It imported my precious bookmarks from IE and FF. I'm going to uninstall IE now and leave FF as an emergency backup browser which I don't expect to need anymore. -
Adobe CC Lightroom en Photoshop installed, only now computer very slow in comparance to Lightroom 5.7, how can i get it faster....? I work on Win 7 Ultimate.
Try to follow below steps
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Now click on finder and hold Command + Shift + G keys on your keypad.
This time type /Library and click on Go.
Make sure to remove ~ symbol.
Then open Application Support > Adobe folders.
Trash AAMUpdater, Adobe Application manager, OOBE folders.
Now Click on Finder and then hold Command + Shift + U keys on your keypad.
It will open utilities folder.
Trash Adobe Creative Cloud and Adobe Application Manager folders
Download and Run CC cleaner tool from below link
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
Accept the license agreement and click on Adobe Application Manager
Then click on clean up selected
Close the window
Download and install Creative Cloud App from below link
Free Creative Cloud | Download Adobe Creative Cloud free trial -
After installing latest iTunes, I began getting R6034 Runtime Error messages, found fix of removing 5 Apple programs, reboot and reinstall iTunes. Seemed to work but now getting error message that my iTunes Library (iTunes Library.itl) cannot be read because it was created with a newer version of iTunes. Need Help!!!
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
just installed latest itunes to my laptop, and icon is on my homepage, but when i try to load it up, i get this message ,The File "itunes Library.itl" cannot be read because it was created by a newer version of itunes! Ive tried uninstalling it then installing again but nothing, ive ran scans on both itunes and quicktime to see what the problem is, and i just keep gettin this message! how do i fix this ANYONE please!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
Can Not installed latest iTunes 10.5.2 for Windows XP
To System support,
I am having trouble installed latest iTunes 10.5.2 for Windows XP. When I start install the exe file, I got an error message:
“There is problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.”
Could someone tell me why I can’t install iTunes 10.5.2?
I even fellow the trouble shooting from iTunes page by uninstall the older version of iTunes. Now I can’t even link my iPhone or iPad now. Please advise me on what is missing in my computer for costing this issue. Thanks for all your supports.
My computer inf:
System:
Microsoft Windows XP
Professional
Version 2002
Service Pack 3
Computer:
Intell(R) Core 2 Duo CPU
T7500 @ 2.20GHz
2.19 GHz, 1.50 GB of RAM“There is problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.”
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Got new computer with windows 8.1 and installed latest itunes, went to update music library on my nano 5th gen and plugged in recognized in my library but when it synced , it said sync was complete but did not update at all, then reset the ipod to factory , BIG MISTAKE plugged in again and it did the same thing except now I have no music on at all it syncs but will not put any music on , previous computer had xp on it, what would the problem be and what would solution be????
Thanksc) unistalled and reinstalled iTunes
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
After installing latest itune software in my computer, my ipod and outlook in my computer are not showing any calender items i added befor
22nd december.Also not syncing with outlook, any calender items i have added in my ipod after 22nd january.I have selected all events to sync
in my ipod.Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though
-
Just got iPhone4 and installing apps on 3G is very slow. Is there something I can do to speed this up?
Use a WiFi connection instead... or download them using iTunes on your computer, then sync them to the phone.
-
I have installed latest itunes software on my pc but it is not opening
i have installed latest itunes software on my pc but it is not opening
HELPwhere are my audiobooks wrote:
I have now opened an itunes account on my PC.
What is meant by this? Was iTunes simply installed and then signed in with the existing Apple ID or was a new Apple ID created?
If the former, simply transfer purchases from the device by selecting File > Transfer Purchases with the device connected. Or re-download them from iTunes as described in the article from which the question was posted.
If a new Apple ID was created, sign out of it and stop using it. Sign in with the same Apple ID that the content was purchased with. -
Installed latest iTunes and neither original iPods connect.
Have 2 original iPods (8Gb and 16Gb). Been using them for years with iTunes. Have Windows 8.1. Installed latest iTunes (12) and now neither iPad is recognized by iTunes even thought PC does. iTunes said to disconnect and reconnect (this didn't work). Then said to uninstall and reinstall iTunes (did this twice and it doesn't work either). This has been working for years - what can I do to recover this support?
Hi bobsteph,
Welcome to the Support Communities! It sounds like you've already tried some troubleshooting steps, but iTunes is still not recognizing your two iPods.
The resource below has troubleshooting steps to take in a specific order to address this issue. I can understand your frustration, but hopefully trying these steps will resolve the issue.
This article is quite extensive, so I've highlighted below only the sections that apply to Windows 8 and iPod Classic. Click on the link for complete details.
iPod: Appears in Windows but not in iTunes - Apple Support
http://support.apple.com/en-us/TS1363
1. Try the iPod troubleshooting assistant
If you haven't already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below.
2. Restart the iPod Service
Windows 8
Close iTunes and disconnect the iPod.
Move the cursor to the upper right corner to open the Charm Bar.
In the search field, type Services.
Choose Settings, below the search field.
Select "View local services" on the right side of the screen.
Scroll down, select iPod Service, and click "Stop the service."
After the service has stopped, click "Start the service."
After the iPod Service has started again, open iTunes and connect the device.
3. Restart the Apple Mobile Device Service
This service is used by:
iPod shuffle (3rd generation and later)
iPod nano (3rd generation and later)
iPod classic
If you don't have one of the devices listed above, this step doesn't apply to you. If you do have one of the above model iPods, restart the AMDS service as follows.
Windows 8
Close iTunes and disconnect the iPod.
Move the cursor to the upper right corner to open the Charm Bar.
In the search field, type Services.
Choose Settings, below the search field.
Select "View local services" on the right side of the screen.
Select Apple Mobile Device and click "Stop the service."
After the service has stopped, click "Start the service."
After the Apple Mobile Device service has started again, open iTunes and connect the device.
4. Empty your Temp directory and restart
For Windows 8
Move the cursor to the upper right corner to open the Charm bar.
In the search field, type Computer and press the Return key.
Open Local Disk C:. If Windows is installed on a different drive, open that drive letter instead.
Open the Users folder.
Double-click the folder that has your user name.
If you see an AppData folder, skip to step 9. If you don't see an AppData folder, proceed to the next step.
Click the View tab and click the Options button, on the far right.
In the Folder Options window, click the View tab.
Select "Show hidden files and folders."
Click OK.
Open the AppData folder.
Open the Local folder.
Right-click the Temp folder and choose Delete from the shortcut menu.
In the confirmation dialog that appears, click Yes.
If you are unable to delete the Temp folder, close all programs, especially any of those in the Notification area (system tray) of the Windows Task bar (shown below). Then, repeat step 13.
Restart your computer.
Install the latest version of iTunes and connect your iPod.
5. Verify that the Apple Mobile Device USB Driver is installed
For Windows Vista, Windows 7, or Windows 8
Connect the device to your computer.
Quit iTunes if it opens.
Open the Device Manager as follows:
For Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type devmgmt.msc, and press Return. The Device Manager window should open.
Click the plus (+) icon (or disclosure triangle () for Windows 7 and Windows 8) next to "Universal Serial Bus controllers" to expand the section.
Locate Apple Mobile Device USB Driver in this list.
If Apple Mobile Device USB Driver is displayed without any downward arrow, "!", or "?" symbols over it, then this driver was successfully installed. Proceed to the next section titled "Change your iPod's drive letter."
If Apple Mobile Device USB Driver isn't listed, proceed to the section below titled "If the Apple Mobile Device USB Driver isn't listed."
If Apple Mobile Device USB Driver has a downward arrow next to it, this indicates that this device is disabled. To enable the device, right-click its entry in Device Manager and choose Enable from the shortcut menu.
If Apple Mobile Device USB Driver is listed but has an exclamation mark or question mark over it, continue with the next steps to reinstall the Apple Mobile Device driver.
Reinstall the Apple Mobile Device Driver
Right-click Apple Mobile Device USB Driver in Device Manager and choose Uninstall from the shortcut menu.
In the resulting dialog box, select "Delete the driver software for this device" and click OK.
In the Device Manager window, right-click "Universal Serial Bus controllers" and choose "Scan for hardware changes" from the shortcut menu.
Windows automatically reinstalls the necessary drivers and attempts to remount the device.
If the Apple Mobile Device USB Driver entry still has an exclamation mark or question mark over it, continue with the next steps to manually update the Apple Mobile Device driver.
Update the Apple Mobile Device Driver
Right-click the Apple Mobile Device entry in Device Manager and choose Update Driver Software.
Select "Browse my computer for driver software."
Select "Let me pick from a list of device drivers on my computer."
Click the Have Disk button. If the Have Disk button isn't present, choose a device category such as Mobile Phone or Storage Device, if listed, and click next; the Have Disk button should now appear.
Click the Browse button.
Navigate to the following location: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Note: If using a 64-bit version of Windows Vista, Windows 7, or Windows 8, navigate to C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file.
Note: This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Click Open.
Click Next and click Finish.
Restart your computer. Leave the device connected to the computer while restarting.
Note: During installation, if a message appears stating that the software you are installing "has not passed Windows Logo testing," click Continue Anyway to continue installing the drivers.
If the Apple Mobile Device USB Driver isn't listed
Open the Device Manager in Windows, as follows:
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type devmgmt.msc, and press Return. The Device Manager window should open.
Expand the following sections (not all sections may be listed):
Disk Drives
Imaging Devices
Other Devices
Portable Devices
Universal Serial Bus Controllers
Reconnect your iPod. Look for any entry that appears when the iPod is connected.
If only Unknown Device appears
Right-click the Unknown Device entry and choose Properties from the shortcut menu.
Click the Details tab. In the drop-down menu, choose Hardware IDs.
See if the listed hardware ID starts with "USB\VID_0000&PID_0000". If it does, Windows cannot read the hardware IDs of the device, and has replaced them with all zeros. This is typically caused by a faulty USB connection or an incompatibility with your USB chipset drivers.
Disconnect your iPod and unplug all USB devices from your computer.
Shut your computer down and then power it back on.
Open the Device Manager and reconnect your device, testing each USB port for approximately 30 seconds to see if your device is recognized.
Test with an alternate USB cable that you know works if one is available.
Temporarily disable USB 2.0 root hubs by looking for any "USB Enhanced Host Controller" or "USB 2.0 Host Controller" (or similar) entries in the Device Manager under the USB Controllers section. Right-click on each of these entries and choose "Disable."
Note: This may temporarily disable your USB keyboard or mouse. If it does, disconnect your USB keyboard and mouse. Or, if you are using a portable PC, connect an external keyboard and mouse.
After disabling USB 2.0, reconnect your device.
If your device shows up in iTunes, try re-enabling your USB 2.0 root hubs by right-clicking on their entries in the Device Manager, and choosing Enable. If the issue returns, you may disable the USB 2.0 hubs as a temporary work-around, keeping in mind that syncing will occur slowly (at USB 1.1 speeds). Then, consult your computer manufacturer for any updates for your USB 2.0 chipset.
Note: If Unknown Device appears in Device Manager when connecting your device to more than one known-good computer with more than one known-good USB cable, your device may require service. Contact Apple. Wherever you live in the world, you can find your device's service options at the Online Service Assistant. You may have questions about servicing your device, and you can find answers to frequent questions in this FAQ. If there is an Apple Retail Store nearby, find the closest store and then make a reservation through the online Apple Store Concierge. Reservations are strongly recommended.
If only "iPod" appears
For Windows Vista, Windows 7, or Windows 8
Right-click the iPod entry in Device Manager and choose Update Driver from the shortcut menu.
Select "Browse my computer for driver software."
Select "Let me pick from a list of device drivers on my computer."
Click the Have Disk button. If the Have Disk button isn't present, choose a device category such as Mobile Phone or Storage Device, if listed, and click next; the Have Disk button should now appear.
Click the Browse button.
Navigate to the following location: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Note: If using a 64-bit version of Windows Vista, Windows 7, or Windows 8, navigate to C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file.
Note: This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Click Open.
Click Next and then click Finish.
Restart your computer. Leave the device connected to the computer while restarting.
6. Change your iPod's drive letter
In some cases, changing the drive letter assigned to the iPod may resolve this issue.
7. Remove and reinstall iTunes
If you haven't already done so when following the Troubleshooting Assistants linked at the beginning of this article, remove and reinstall iTunes.
Note: Songs you purchased from the iTunes Store or imported from CDs are saved in your My Music or Music folder by default and aren't deleted when you remove iTunes.
Windows Vista, Windows 7, or Windows 8: Follow these steps to remove and reinstall iTunes.
8. Disable conflicting System Services and Startup Items
Installed background processes can sometimes prevent the iPod Service from running. You may be able to resolve this by disabling some items with the System Configuration Utility.
For Windows Vista, Windows 7, and Windows 8: Refer to Using MSCONFIG to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8.
9. Update, Reconfigure, Disable, or Remove Security Software
Some antivirus, firewall, or other security software can prevent iPods from displaying in iTunes. Updating, reconfiguring, disabling, or removing your security software may resolve the issue.
Note: For the best computer security, disconnect your computer from the internet prior to disabling or removing your security software. After testing, reinstall security software before reconnecting to the internet.
10. Deleting damaged or incorrect registry keys
If your iPod is recognized successfully on a different computer, and the steps above didn't resolve your issue, there is likely some other system issue on your computer that is the cause. This may require you to repair or reinstall Windows. If you need assistance with this, contact whomever supports Windows on your computer. In most cases, this will be the computer manufacturer.
I hope this information helps ....
- Judy -
WIFI too slow after IOS 6 installed. SAFARI is loading very slow for burmese language websites. Not only that....many other websites too.....Please help.....Don't expect that ENglish is only language we expect to view on IPAD......
Most websites are responding very slow with safari & many other broswers opera.........Too annoying IOS 6...Give me IOS 5 back...Tell me how.....
I am too angry with IOS 6.......My IPAD 2 & IPHONE 4S all suck after installing IOS 6..........
I can't believe "$600 billions " company released without testing on every devices with different wifi routers, applications on their store.........
Give me some ways to downgrade to IOS 5.1.1......iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have been getting notices to instal latest version of firefox. However, I understand that SMART BOOKMARKS TOOLBAR , is not compatible. I experienced this before. Therefore, I do not want to go for it. .But at the same time, I often get problem in google documents because of no latest version.
Pl. helpThe developer of '''''Smart Bookmarks Bar''''' seems to have abandoned that Add-on and has not issued an update to it since 2009-02-13.
*See --> https://addons.mozilla.org/en-US/firefox/addon/smart-bookmarks-bar/versions/
Have a look at a very similar Add-on named '''''Roomy Bookmarks Toolbar'''''. If you like that Add-on, un-install '''''Smart Bookmarks Bar''''' before installing it.
*See --> https://addons.mozilla.org/en-US/firefox/addon/roomy-bookmarks-toolbar/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community, I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0043AC7C0368E428
Current user is not an administrator.
The current local date and time is 2012-07-24 23:43:08.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.Doublechecking ... did you have CD/DVD drive tests checked when you ran those diagnostics? (I'm not seeing the CD/DVD test results down the bottom of the results where I'd expect to see them.)
For example, here's what I get:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire X3400
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CAD7C0A1258F8
Current user is not an administrator.
The current local date and time is 2012-07-26 10:42:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is supported.
Core Media is not supported. (16008)
Video Display Information
ATI Technologies Inc., AMD Radeon HD 6570
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d6a87ba725121aa1240b1ce936c23470
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ATAPI DVD A DH16ABSH, Rev YA12
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 255:57 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4.
Maybe you are looking for
-
I've installed a new Solaris 10 as the development platform. And I added the some packages from www.sunfreeware.com. Then, I found user could not use the 'su' command. Here is the dmesg. Dec 23 17:14:57 host su: [ID 401707 auth.error] open_module: /u
-
Username and workflow problems
For my site the username of some workflows are changed to and also new workflows use io#|member|[email protected] as the modified user of a workflow Workflows which have that username also don't show up in the allfiles>workflows list in sharepoint
-
Migrating MS Access97 to Oracle 8i.1.x
Can anyone provide me some good web links, white papers, etc. to review in migrating MS Access97 (.MDB's) to Oracle 8i.1.x? Thanks.
-
Contact Pictures - showing up small
Just bought iphone 5c and all my contacts are showing up as small round thumbnails. How do I make them full screen. This is driving me crazy. Please help!
-
Adobe Flash Player needs upgrade
Yes hello I'm having trouble playing music from web sites. Mainly ckcufm.com. The error is "you need Adobe Flash Player v10 or higher"