Installed LDOM on solaris 10, Primay domain GUI isn't working.

We have a SUN T2000 server, where we had installed LDOM 1.1 version in the existing Solaris 10 version. We created only one guest domain. When thought, we are all set.. the Primary domain XDMCP remote logins
is n't working. Whereas the guest XDMCP remote login(GUI) is working fine.
I receive the following error whne I start the GDM :-
bash-3.00# gdm
bash-3.00# Apr 22 20:07:41 BLRSOLPLM01 gdm[5656]: gdm_slave_xioerror_handler: Fa
tal X error - Restarting :0
Apr 22 20:07:44 BLRSOLPLM01 gdm[5659]: gdm_slave_xioerror_handler: Fatal X error
- Restarting :0
Apr 22 20:07:47 BLRSOLPLM01 gdm[5662]: gdm_slave_xioerror_handler: Fatal X error
- Restarting :0
Apr 22 20:07:47 BLRSOLPLM01 gdm[5655]: Failed to start X server several times in
a short time period; disabling display :0
dtlogin is running..
bash-3.00# ps -ef |grep -i dtlogin
root 5499 1 0 20:05:32 ? 0:00 /usr/dt/bin/dtlogin -daemon -udpPort 0
root 5690 5619 0 20:12:00 console 0:00 grep -i dtlogin
bash-3.00# netstta -an |grep 177
bash: netstta: command not found
port no.177 is open
bash-3.00# netstat -an |grep 177
*.177 Idle
*.177 Idle
bash-3.00# ps -ef |grep gdm
root 5698 5619 0 20:12:20 console 0:00 grep gdm
root 5655 1 0 20:07:41 ? 0:00 /usr/bin/gdm-binary
$cat /etc/X11/gdm/gdm.conf# XDMCP is the protocol that allows remote login. If you want to log into
# gdm remotely (I'd never turn this on on open network, use ssh for such
# remote usage that). You can then run X with -query <thishost> to log in,
# or -indirect <thishost> to run a chooser. Look for the 'Terminal' server
# type at the bottom of this config file.
[xdmcp]
# Distributions: Ship with this off. It is never a safe thing to leave
# out on the net. Setting up /etc/hosts.allow and /etc/hosts.deny to only
# allow local access is another alternative but not the safest.
# Firewalling port 177 is the safest if you wish to have xdmcp on.
# Read the manual for more notes on the security of XDMCP.
Enable=true
This problem occured soon after the LDOM 1.1 installation, prior to the LDOM installation, GUI in the primary domain was working great. I could find a script file LDoms_Manager-1_1\Product\SUNWjass\reloc\SUNWjass\Finish\disable-xdmcp.fin
which I beleive has screwed up the XDMCP remote logins.
Please help me to resolve this issue.

Our system "solaris 10 sparc" crashes "hangs" when we connect remotly with exceed with the follwing error..
gdm_slave_xioerror_handler: Fatal X error - Restarting
Does any one have the solution?.

Similar Messages

I installed Win7 on my iMac but the internet isn't working

I can't get the internet to work using Windows 7 on my iMac. It seems like there is no drivers for the internet hardware. I've installed the drivers from bootcamp/IOS-dvd, but nothing happens. I've downloaded the newest bootcamp with drivers but it can't install since I already have bootcamp.

Well audio drivers have alwasys had to be updated after installing Windows and installng Apple drivers. Always. Almost asked daily.
Whether Cirrus Audio is up to 8 yet, but you should be using the Release Preview "RP" not the Sept 2011 DEV Preview

Just installed DPS for windows cs6 and Folio Builder isn't working

I've just installed the DPS for windows CS6, but there are no options in the Folio Builder, yet i can create new Articles. How do i get the Folio Builder working?
Does it need to be connected to the internet? I work for a large organisation and have firewall restrictions limiting internet access from In Design, but thought i could work offline.
Any clues to what i might be doing wrong?
Thanks

Yes, CS6 Creative Cloud on Windows 7. I also am running this on my old Mac Pro which is working fine. (I only run one at a time to avoid license problems).
Anything related to the "folio" is empty or functionless. I can see the Folio Builder and Folio Overlay panels, but nothing is in the windows. I installed the CS6 DPS tools as well.

After installing Itunes 10.1.2.17, homes sharing doesn't work no more!

After i installed itunes 10.1.2.17, home sharing isn't working anymore. I checked to make sure it is turned on & the bonjour is enabled. What happened? It was working before with the previous version.

I see exactly the same symptoms; previously Home Sharing worked fine. After installing 10.1.2.17 on the PC that contains the main library, the library appears on my other XP and Windows 7 laptops, but on clicking on the library focus returns to the Music folder after several seconds.
I have a Dell Dimension 2400 running Windows XP Home Edition 5.1 build 2600. It is connected to a Linksys router by cable. The laptops are connected using WiFi. Nothing else has changed in the setup apart from the iTunes upgrade.
Any ideas?

HT204370 I just bought GOT season 1, and it says i need the quicktime player, which I then installed, but it still isn't working, what should I do?

I've already tried uninstalling and then installing the quick time again, but it still isn't working. I have an ASUS laptop it that helps.

I think this is a known problem with Lion and some installs of Logic, I've seen it mentioned before.
Contact Apple.
Here is a related thread.
https://discussions.apple.com/thread/3218471?start=0&tstart=0

Install oracle10g at solaris 10 x86 platform ORA-07445 error occured

I meet a problem when install oracle10g at solaris 10.when create database, the dbca display infomation:
ora-03113 "end-of-file on communication channel"
ora-03114 ORACLE not available
Perhaps someone can give me some advices ?
Its very urgent
Thanks and Best Regards
Dillon.xu
OS: solaris10g
# showrev
Hostname: v40-1
Hostid: 24ea10ed
Release: 5.10
Kernel architecture: i86pc
Application architecture: i386
Hardware provider:
Domain: test.com
Kernel version: SunOS 5.10 s10_74
v40-1# prtconf |grep Mem
Memory size: 2048 Megabytes
database: oracle10g 10.1.0.3
Oracle trace file info:
export/home/oracle/product/10.0/rdbms/log/ora10g_ora_1759.trc
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /export/home/oracle/product/10.0
System name: SunOS
Node name: v40-1
Release: 5.10
Version: s10_74
Machine: i86pc
Instance name: ora10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
1759
kstwlb: SGA is no longer mapped
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x
59fffff4
*** 2005-02-22 14:20:07.861
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [SIGSEGV] [Address not mapped to obj
ect] [1509949428] [] [] []
Current SQL information unavailable - no session.
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)

10g on Solaris 10 isn't yet supported. It is announced for March 2005.

How to install Dual OS(solaris 10 and Windows XP)?

I have got a 80 gb sata hard disk and i am not able to install Dual OS(solaris and Windows XP ) on it.My Partitions are as follows:
Primary partition-5GB
Remaining are extended Partition.
Extended partition details
8 gb NTFS partition(installed windows XP)
7 gb NTFS partiton(No data in it)
20 gb NTFS partition(No data in it)
20 gb NTFS partiton(has data in it)
15 gb RAW partiton
I first installed Windows xp on 8 gb Extended partiton.Then when i installed Solaris i could see only 2 partitons.One with the 5 gb and the other with the 71 gb.I actually wanted to install my solaris on the 15 gb Raw partition.Since i could not see the partition(15 gb Raw) i installed solaris on the 5 gb partition.Now when the comp boots it goes to solairs os only.i dont have the option to choose windows at all.
could any one of you explain me how the partitions are supposed to be and how could i make it as a Dual OS.
Saravanan
Message was edited by:
SaravananMandala

Windows uses the primary partiton for boot, too, even if you installed it on the NTFS volume in the extended partition. Wherever you install Windows, it will need the primary partition for booting. You can never boot from Windows extended partitions
As for the 15Gb raw partition, it look like what you call 'RAW partition' is actually just a small little part inside the extended partition. All your NTFS partitions (and your RAW partiton) are logical volumes and they all reside inside the extended partition. Even though Windows sees them as separate drives, each with its own drive letter, just as it sees the primary partition.
You may try do use Windows fdisk or diskpart to delete the last logical volume in the extended partition, and then get the ntfs resize tool from Linux, or the CD1 from the Debian Linux install CDs, which has it included and accessible with a nice user interface, and resize your extended partition.
I don't know if it works, I only used it to also resize some logical volume inside the partition. ntfs resize tool might not be easy to work with, you will need to read its documentation, but it does resize NTFS partitions (I have seen it).
If it works, then you will have your 15Gb as unallocated space available for a new partition. Let the Solaris installer create this new partition automatically during install.
Timothy Madden,
Romania

Cant install agent11g on Solaris 9

Hi
I do have problem installing agent on solaris 9 64 bit.
I tried tree ways - pushing agent from OMS, downloading agent using agentDownload and cloning agent from almost identical machine.
Installation script start failing on the linking step giving errors about not being able to link. All prerequisites for agent are met.
The third solution works until starting agent.
Agent doesn't start throwing an error:
emctl start agent
ld.so.1: /export/home/oracle/agent11g/perl/bin/perl: fatal: attempt to open file with null name
Killed
If I execute this being in AGENT_HOME directory but using emctl.pl:
bash-2.05$ perl ./bin/emctl.pl start agent
Can't locate lib.pm in @INC (@INC contains: ../lib/5.10.0/sun4-solaris-thread-multi-64 ../lib/5.10.0 ../lib/site_perl/5.10.0/sun4-solaris-thread-multi-64 ../lib/site_perl/5.10.0 ../lib/5.10.0 ../lib/5.10.0/sun4-solaris-thread-multi-64 ../lib/site_perl .) at ./bin/emctl.pl line 201.
BEGIN failed--compilation aborted at ./bin/emctl.pl line 201.
If I go to perl/bin directory and execute the same, adjusting paths:
bash-2.05$ cd perl/bin
bash-2.05$ perl ../../bin/emctl.pl start agent
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/sysman/emSDK/conf/TargetInstaller (Unsupported major.minor version 50.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:509)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:246)
at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:322)
EM Configuration issue. not found.
Can someone help me with this?
Thanks
EDIT: during linking I get this error:
INFO: ld: fatal: library -lclntsh: not found
Edited by: Jarek Jozwik on 10-Feb-2011 08:50
I do also get those errors:
INFO: /export/home/oracle/agent11g/bin/genoccish
INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib/libocci11.a(occiSQLExceptionImpl.o): section .rela.text: invalid
relocation type: 0x52
INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib32/libocci11.a(occiSQLExceptionImpl.o): section .rela.text: inval
id relocation type: 0x52
INFO: /export/home/oracle/agent11g/bin/genagtsh /export/home/oracle/agent11g/lib/libagtsh.so 1.0
INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib/shoc.o: section .rela.text: invalid relocation type: 0x52
INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib32/shoc.o: section .rela.text%shocodat_os_date_to_julian: invalid
relocation type: 0x52
Edited by: Jarek Jozwik on 10-Feb-2011 08:59

Hi Jarek,
I do not know to much about Solaris but this note (the truss command) cold give you a clue what is going on: 11g Grid Agent: Executing emctl Fails with 'Segmentation Fault' on Solaris 5.9 (Update 2) [ID 1140615.1]
Also: 11gR1 on Solaris failing at relink phase with errors like "ld: fatal: relocation error" and then "ld: fatal: library -lclntsh: not found" [ID 848700.1] could be of help regarding the link (lclntsh) error.
Eric

Installing 11i on Solaris and migrating 8.0.5 to new 8.1.6 database

I've installed 11i (several times) on a new Sun solaris server. I also selected it to install a fresh database. On another server we have 11.0 and 8.0.5 database. We are using a new server to install 11i and we want to move our database over. I managed to transfer all database files over to the new server and upgrade to 8.1.6 (succeeded)
How do I proceed now to get the 11i applications to use the database i've transferred over. Is this possible??? Can't find any clear documentation on how to merge this database into the applications 11i.
Thanks
null

Gina, I am attempting something similar... but it involves moving an exisiting installation from HP-UX to Solaris, so I cannot move the datafiles... If I run into a method that helps both of us, I will let you know... as of now, I am installing fresh on Solaris and going to try to run upgrade scripts on existing 10.7 and exp/imp into the new instance on 11i (Solaris).
Let me know of anything you find out that could help me, and I will do the same...
thanks
dns

Need 11gr2 RAC install Guide on Solaris 10 x86 using containers and NFS

I'm looking for an 11gr2 RAC install Guide on Solaris 10 x86 using 2-3 containers. I need to have the NFS server reside in the global zone or on a 3rd container visable to the two rac containers.
Please share me installation guide!
Thank you!
PS - I currently have run into an install issue -
Can't change ownership on /oracle/products/11.2.0/ocr/: not owner at /oracle/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 5014.
I suspect the NFS share params from the NFS server in the global zone are not 100% correct to the two rac zones/containers.

Have you visited Oracle Support Services website (formerly metalink) to determine if your desired configuration is supported?
Last time I looked it was not.
That said Oracle database installation guides are fully documented online.
http://www.oracle.com/technetwork/database/enterprise-edition/documentation/database-093888.html

Oracle 9i install failing on Solaris 10

Oracle 9i install on Solaris 10 fails at the Database creation stage with Ora error "Out of Memory"
I have a Ultra 10 with 1GB RAM, 2GB swap and lot of space in the filesystem where I am installing Oracle
The oracle release notes asks for increased value for shmmax, shmmni etc by editing /etc/system and according to Solaris 10, it is not required as kernel dynamically allocates those values. It looks like it is NOT. How can I verify?
rcladm talks about shmmax values only with projects. How can I verify that all my applications running on a this box has a higher SHMMAX values and not on per project basis.
In older versions, sysdef could tell us the current SHMMAX values. Is there any comparable commands in Solaris 10.
I am not that comfortable with the rcladm features. Can some one show some examples.
Is anyone successful in installing Oracle9i on Solaris 10. I heard Oracle patch set 9.2.0.5 and 9.2.0.6 is certified with Solaris 10. Does it mean the original version of 9.2 does not install on Solaris 10?

'Net Configuration Assistant is failing" from installation. I tried twice and got the same problem. I tried to run 'netca' from the command line and got the same problem - Java runtime problem. I tried to install patch and could not find Oracle patches for Solaris 10 and the patches are for Solaris 9.
Does anyone have suggestion?
$ ./netca
ld.so.1: /usr/ora/920/oracle.swd.jre/bin/sparc/native_threads/jre: fatal: relocation error: file /usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so)
ld.so.1: /usr/ora/920/oracle.swd.jre/bin/sparc/native_threads/jre: fatal: relocation error: file /usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so)
java.lang.NullPointerException
at oracle.ewt.lwAWT.BufferedApplet.<init>(Compiled Code)
at oracle.net.ca.NetCA.<init>(Compiled Code)
at oracle.net.ca.NetCA.main(Compiled Code)

Can EM12c Cloud Control agent be installed in a solaris zone?

Can EM12c Cloud Control agent be installed in a solaris zone?
If so, are Solaris 8 and Solaris 9 zones supported?
thanks

Yes we can...
Solaris 9 is supported...I have installed agents on solaris 9 and 10

Docs needed for installing siebel in solaris 10 x86, Urgent..!!!!!!!!

Docs needed for installing siebel in solaris 10 x86
Thanks
Kishore
Edited by: Kishore P on Aug 11, 2010 6:03 PM

If it's documentation you're after, always go straight to Siebel Bookshelf!
http://download.oracle.com/docs/cd/E14004_01/books/SiebInstUNIX/SiebInstUNIXTOC.html

HOW TO INSTALL ROUTING IN SOLARIS 10

I have already installed my Solaris 10 Server, I was tryin to implement the routing in the file /etc/init.d/inetsvc (/etc/rc2.d/S98inetsvc) as in Solaris 8.
!! this file does not exists!!
How install routings in Solaris 10 6/06 ??
thanks

I have already installed my Solaris 10 Server, I was
tryin to implement the routing in the file
/etc/init.d/inetsvc (/etc/rc2.d/S98inetsvc) as in
Solaris 8.
!! this file does not exists!!
How install routings in Solaris 10 6/06 ??It depends on what your routing script does. Solaris 10 introduces persistent routing, so you may just need to add the route once (persistently), then let the system take care of it.
Darren

Installing openssl on solaris 10

I am trying to install openssl-1.0.0g.tar.gz on solaris 10 but I got this error;
root@sun1 # cd /usr/local/openssl-1.0.0f
root@sun1 # make
making all in crypto...
cc -I. -I.. -I../include -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFC
N_H -xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DI
V2W -DOPENSSL_BN_ASM_MONT -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DAES_ASM -c cr
yptlib.c
sh: cc: not found
*** Error code 1
make: Fatal error: Command failed for target `cryptlib.o'
Current working directory /usr/local/openssl-1.0.0f/crypto
*** Error code 1
The following command caused the error:
dir=crypto; target=all; if expr " crypto ssl engines apps test tools " : ".* $di
r " >/dev/null 2>&1; then if [ -d "$dir" ]; then ( cd $dir && echo "making
$target in $dir..." && TOP= && unset TOP ${LIB+LIB} ${LIBS+LIBS} ${INCLU
DE+INCLUDE} ${INCLUDES+INCLUDES} ${DIR+DIR} ${DIRS+DIRS} ${SRC+SRC}
${LIBSRC+LIBSRC} ${LIBOBJ+LIBOBJ} ${ALL+ALL} ${EXHEADER+EXHEADER} ${
HEADER+HEADER} ${GENERAL+GENERAL} ${CFLAGS+CFLAGS} ${ASFLA
GS+ASFLAGS} ${AFLAGS+AFLAGS} ${LDCMD+LDCMD} ${LDFLAGS+LDFLAGS}
${SHAREDCMD+SHAREDCMD} ${SHAREDFLAGS+SHAREDFLAGS} ${SHARED_LIB+SH
ARED_LIB} ${LIBEXTRAS+LIBEXTRAS} && make -e PLATFORM='solaris-sparcv9-cc' PROCES
SOR='' CC='cc' CFLAG='-DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H
-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W
-DOPENSSL_BN_ASM_MONT -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DAES_ASM'
AS='cc' ASFLAG='-DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN
H -xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DBENDIAN -DBN_DIV
2W -DOPENSSL_BN_ASM_MONT -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DAES_ASM -c'
AR='ar r' NM='nm' RANLIB='/usr/ccs/bin/ranlib' CROSS_C
OMPILE='' PERL='/usr/bin/perl' ENGDIRS='ccgost' SDIRS='objects
md4 md5 sha mdc2 hmac ripemd whrlpool des aes rc2 rc4 idea bf cast camellia se
ed modes bn ec rsa dsa ecdsa dh ecdh dso engine buffer bio stack lhash rand er
r evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 cms pque
ue ts' LIBRPATH='/usr/local/ssl/lib' INSTALL_PREFIX='' INSTALL
TOP='/usr/local/ssl' OPENSSLDIR='/usr/local/ssl' LIBDIR='lib'
MAKEDEPEND='$${TOP}/util/domd $${TOP} -MD makedepend' DEPFLAG=
'-DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -D
OPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_STORE' MAKEDEPPROG='makedepend
' SHARED_LDFLAGS='-G -dy -z text' KRB5_IN
CLUDES='' LIBKRB5='' ZLIB_INCLUDE='' LIBZLIB='' EXE_EXT='' SHARED_LIBS=
'' SHLIB_EXT='.so.1.0.0' SHLIB_TARGET='solaris-shared' PEX_LIBS='' EX_
LIBS='-lsocket -lnsl -ldl' CPUID_OBJ='sparcv9cap.o sparccpuid.o'
BN_ASM='bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o' DES_ENC='des_enc-s
parc.o fcrypt_b.o' AES_ENC='aes_core.o aes_cbc.o aes-sparcv9.o' CMLL_ENC='
camellia.o cmll_misc.o cmll_cbc.o' BF_ENC='bf_enc.o' CAST_ENC='c_enc.o'
RC4_ENC='rc4_enc.o rc4_skey.o' RC5_ENC='rc5_enc.o' SHA1_ASM_OBJ='sha1-spar
cv9.o sha256-sparcv9.o sha512-sparcv9.o' MD5_ASM_OBJ=''
RMD160_ASM_OBJ='' WP_ASM_OBJ='wp_block.o'
PERLASM_SCHEME='void' THIS=${THIS:-build_crypto} MAKE
FILE=Makefile MAKEOVERRIDES= TOP=.. DIR=$dir $target ) || exit 1; fi; fi
make: Fatal error: Command failed for target `build_crypto'
root@sun1 #
I run make report and got the following:
root@sun1 # make report
Use of uninitialized value in pattern match (m//) at util/selftest.pl line 52.
Use of uninitialized value in pattern match (m//) at util/selftest.pl line 53.
Use of uninitialized value in string eq at util/selftest.pl line 54.
Can't exec "cc": No such file or directory at util/selftest.pl line 54.
Use of uninitialized value in substitution (s///) at util/selftest.pl line 55.
Use of uninitialized value in substitution (s///) at util/selftest.pl line 56.
Use of uninitialized value in scalar chomp at util/selftest.pl line 57.
Use of uninitialized value in concatenation (.) or string at util/selftest.pl li
ne 76.
Checking compiler...
Can't exec "cc": No such file or directory at util/selftest.pl line 83.
Can't exec "./cctest": No such file or directory at util/selftest.pl line 84.
Use of uninitialized value in pattern match (m//) at util/selftest.pl line 84.
OpenSSL self-test report:
OpenSSL version: 1.0.0f
Last change: Nadhem Alfardan and Kenny Paterson have discovered an e...
Options: no-gmp no-jpake no-krb5 no-md2 no-rc5 no-rfc3779 no-shared no
-store no-zlib no-zlib-dynamic static-engine
OS (uname): SunOS bio1 5.10 Generic_144488-01 sun4v sparc SUNW,SPARC-Enter
prise-T5120
OS (config): sun4v-whatever-solaris2
Target (default): solaris-sparcv9-cc
Target: solaris-sparcv9-cc
Compiler:
Compiler doesn't work.
Please ask your system administrator/vendor for more information.
[Problems with your operating system setup should not be reported
to the OpenSSL project.]
Test report in file testlog
when I run gcc -version I got the command not found but I check with pkginfo -i gcc and it is installed . I also add /usr/local/bin to the ./profile path but same problem.
any idea please.
Edited by: Hani on Jan 20, 2012 11:37 AM

I have installed openssl-1.0.0e-sol10-sparc-local in my hosts and it is working, this can be installed with pkgadd.

Installed LDOM on solaris 10, Primay domain GUI isn't working.

Similar Messages

Maybe you are looking for