Installed Leopard and now MacBook can not run on battery
I installed Leopard and now if it is disconnected from the power it will shut down immediately. It worked fine before.. How do I fix?
You might try to reset the SMC (System Management Controller) and/or PRAM (Parameter Random Access Memory). Mac OS X: What's stored in PRAM?
Similar Messages
-
Just installed Leopard and now I can't send an e-mail
I just finished installing Leopard and now I can't send or forward an e-mail. It wont even let me click on send. I'm not getting any error messages either. Anyone know why I can't send an e-mail?
Since upgrading to Leopard, we have had trouble sending email. Usually couldn't but sometimes it would allow an outgoing message. Hours spent with tier 2 tech support, at Apple, AT&T and Netopia. All Mail settings were verified as correct. I saw a possible solution somewhere else in this discussion forum and tried it. Now Mail is working fine, with consistent email sending. Solution for us was to get the DNS numbers from AT&T and enter them on the Mac under System Preferences/Network/Advanced/DNS. The only DNS number listed there was the one for our Netopia 3347 modem. I clicked the + and added both the Primary and Secondary DNS numbers provided by AT&T. Clicked "OK", "Apply". Then I rebooted--don't know if that was necessary--but now email sends easily and so far no more "server does not support authentication" error messages. It was an easy solution, so it's worth a try.
-
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
I have problems in the Safari browser , and I have deleted the program using the "Clean My Mac" App and now I can not install it , he say " This update requires mac ox 10.6 "
I would like to install the Safari browser on my system Lion os x 10.7.1 …..Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Actually, you cannot download Snow Leopard. You downloaded a Snow Leopard updater. -
i accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu. -
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I just upgraded my iMac to OS 10.8.5 from 10.6.8 and now I can not get the calendars on my Mac and my iPhone 4s (running iOS 8.3) to sync. I already tried replacing the calendars on the phone with those on my computer but nothing happened.
Set up iCloud
Set up iCloud (2) -
I just finished installing 11.3 and now iTunes will not run.
I just finished installing 11.3 and now iTunes will not run. I have uninstalled itunes and resinstalled several times. Now when I attempt to start iTunes i get the following two error dialogues:“The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll. and was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)
Hi Greybeard1955,
Welcome to the Apple Support Communities! I understand that iTunes is not opening after uninstalling and re-installing it. When iTunes is uninstalled on a Windows computer, all of its components must be removed as well and they must be removed in a specific order. Below is the article for uninstalling on Windows 7. I recommend uninstalling iTunes and all components in order and reinstalling fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
I hope this helps,
-Joe -
I threw up the box before installing photoshop elements 13 and now i can not installed my brand new photoshop because i do not have a serial number
When you buy software, the serial number is really what you're buying, since the software is typically downloadable. So don't throw it away in the future.
If you registered the software before you threw away your serial number, then Adobe may have a record of your purchase.
You could try chatting with a Support Agent:
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html -
I was trying to update my iphone and now I can not activate it, it says no sim card installed.
What can I do now, help please.Ntmate68 wrote:
it's stuck on a screen that has a iTune and plug picture
See Here > http://support.apple.com/kb/HT1808
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766 -
Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank youDid you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM -
I have an iPod touch that was my niece's and we restored it and now we can not install apps. It says that it needs an ios update but i cannot find where the update is available. My iTunes says it is the latest version and the web site doesn't have any updates that I can find
See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I updated my computer with the I Photo June 2012 program and now I can not open I photo or shut off the computer because I get a message that says "The library needs to be updated to work with this version of I Photo' I have no other updates to install. How do I update the library to get into I phootos. riderm622
backup your iPhoto library and download the 9.1 update and install it
LN -
I lost my images from my hard drive and now I can not access them in Lightroom. What can I do?
Your images are truly no longer present on the hard drive(s)? Have you had your operating system do a search for them?
If such a search fails to find them, here's what I would do, in order
Look in the trash can/recycle bin
Restore from backups
If you don't have backups ... well, why not? ... find a program on the internet called an "undelete utility" (free versons are available) and then download and install it and run it. If you are going to do this, then do not perform any other tasks on your computer except find the program, download it (if possible to a different drive than the photos were stored on), install it (if possible to a different drive than the photos were stored on), and run it. In the future, you will need to commit to making regular backups of your photos and of your Lightroom catalog file, no excuses.
If that doesn't work, but the thumbnails still appear in Lightroom, you can probably recover the thumbnails from Lightroom via a plug-in, but these would be low-resolution versions of your photos, if you really need instructions on this step, write back -
I have been using pages for months and now I can not get it to open any templet or previous document to open?
A little more information would be helpful.
What version of Pages are you using? The latest is 4.1 with the update released on July 20. In Snow Leopard 10.6.8 you need at least Pages 4.0.5. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.
If you are running at least Pages 4.0.5 & haven't made any other changes to your Mac since Pages was last working correctly, the likely culprit is corrupt preferences. Go to HD > Users > (your account) > Library > Preferences & delete the com.apple.iwork.pages.plst & restart Pages.
Maybe you are looking for
-
HT1918 How do you take credit card info off to use a iTunes card credit?
I do not want my debit card used for purchases, so I bought an iTunes card. However now it says that I have the credit but is still requiring my debit card to be verified. How do I fix this and can make purchases by only using my iTunes gift card?
-
According to this post (below), all we need in order to allow native inline video for the iPhone is a simple Obj-C property webview.allowsInlineMediaPlayback = YES; in conjunction with adding "allowsInlineMediaPlayback" to the html5 video tag. http:/
-
Passwording a floder using Disk Utility
I'v gone through the recommended way of creating an image from a folder and giving it a password. All goes well until I go to open it. I click on the dmg file, the disk mounts on the desktop and then I can open it and see all my files BUT it never as
-
ITunes won't play the last two episodes of my BlogTalkRadio podcast
The latest two episodes of my podcast hosted on BlogTalkRadio and syndicated to iTunes won't play. Both episodes play the BlogTalkRadio-supplied preroll ad, and there is correct length and description metadata, but the files play 1 second of silence.
-
HT201263 ipod is disabled, try again in 22,563,620 minutes
Please Help me to enable my ipod touch.