Installed Mac OS 10.9.2 software, Canon MP 240 Scanner Won't Work

I installed the Mac software update to my MacPro laptop.  My Cannon MP 240 print function works fine, but the scanner software gives me error messages no matter how many times I've reinstalled drivers.  Any suggestions on how to get the scanning function including saving as a pdf function to work again.  Thanks.
NancyCK

NancyCK wrote:
I'm trying to use the Canon's MP Navigator scanning application.
To use MP Navigator you must have the MP240 scanner driver installed. To check if this scanner driver has installed, open Finder and select Go > Go to Folder and enter /Library/Image Capture/TWAIN Data Sources then press Go. With the TWAIN Data Sources folder open, do you see a file called Canon MP240 series.ds. If not, then install the scanner driver linked to above.
NancyCK wrote:
I can scan from system preferences, but can't save and use for other purposes.  Any recommendations on how to scan from System Preferences and then save as a pdf document?
This sounds like you have a permissions problem. Open Disk Utility, select your Mavericks partition and click on Repair Disk Permissions. When this has completed see if you can scan.
You could also try opening Image Capture and with the Show Details view selected, see what folder it is being scanned to and if that fails, then see if you can scan to a different folder.
And via Image Capture you also have the option to save the document as a PDF.

Similar Messages

  • I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete.   Any suggestions?

    I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the Cannon website for the correct driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete.   Any suggestions? 

    Might have a hardware issue that was caused by the minor liquid spill.
    Take it to Apple to have them look at it.  I think they do a free diagnostics.  That way you can find out what's wrong with your MB.
    Good luck....Hope you get it sorted out.

  • Canon MX 860 scanner won't work after installing Mt Lion

    After upgrading my IMac to Mountain Lion v 10.8 my wireless Canon MX 860 scanner function won't work. The printer works. When I try to start the scanner either from the keyboard or the scanner I get an error message: MP Navigator EXquit unexpectedly.
    I downloaded and reinstalled the scanner driver
    mac-mx860-14_11_4a-ea8_2-1.dmg
    and restarted and it still doesn't work.
    any other suggestions?
    thank you

    You may also need to update MP Navigator to v2.1.3. If you are using an older version then trash that version before installing the latest version.

  • I just migrate settings and software from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install.

    I just migrate settings and software, include CC, from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install. I have try because every time I restar keep bothering asking for installation, (by the way, the link is not up to date). Will appreciate your help.

    never migrate adobe software.  it should be properly installed.
    uninstall all the cc programs you can, clean and then reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • HT5313 Now I installed MAc Os X 10.7.5 Photoshop 11.0.2 won't run anymore. Who know's the clue? Do I need to update to CS 6?

    Now I installed Mac Os X 10.7.5  Photoshop 11.0.2 won't run anymore. Who know's the clue? Do I need to update to CS 6?

    Now I installed Mac Os X 10.7.5  Photoshop 11.0.2 won't run anymore. Who know's the clue? Do I need to update to CS 6?

  • CanoScan 9000F scanner won't work on my MacBook Pro even though it should be compatible with the Mac 10.7.2 OS.

    My new CanoScan 900F scanner won't work on my MacBook Pro even though I've followed all instructions to make it compatible with the 10.7.2 OS. The USB connection isn't recognised. What else con I do?

    I have a similar problem with a new CanoScan 9000F which I tried to use without any success on my desktop computer (Mac Pro 5,1) and laptop (Macbook Pro 1,2) both running OS 10.6. Problem is identical on both, viz:
        •    Scanning process appears to start, a message comes on the screen: Scanning do not open document cover followed by Scanning...
        •    This is then replaced by the message: Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. 2.155.33
    I've spent several hours on the phone with Canon support but having uninstalled/installed/reinstalled/updated/turned on/turned off/unplugged/plugged/restarted innumerable times, the problem is exactly the same. The scanner icon shows up in the Printer & Fax System Prefs (though without the little status lights) and shows as being connected in the USB tree. I think it's a problem with the scanner, Canon bods are suggesting the Macs are at fault and suggest I try connecting to a wintel (hawk, spit) and it's 100km to the nearest Canon service centre.
    Any suggestions as to what might be the problem/s and what I might be able to do to fix it/them?
    Thanks.
    By the way, bought the Canon to replace a HP Scanjet 8300 which I've used for 6 years almost without problems. Any that I have had have been fixed merely by turning the scanner off then on after a 10 second rest.

  • Just installed mountain lion now my scanner won't work

    Just installed mountain lion and now my epson scanner won't work!  message says "power PCs are no longer supported-is there an app?

    Bet you upgraded from Snow Leopard. The scanner software you have installed is likely PPC but could run in Snow Leopard, which was the last version of Mac OS X that supported it, rather than just Intel software.
    I'd suggest going to the Epson website and getting Mountain Lion compatible drivers from their Drivers and Support page. They will be for Intel Macs such as yours.

  • My canon pixma E510 scanner is not working

    My canon pixma E510 scanner is not working any error "Your printer is in use" popups every time is use scan command

    Hello parvenza,
    It sounds like you are experiencing issues with your Canon scanner, I'm sure that is frustrating. I have found an article with some resources that may help get your device back up and running:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    If these steps yield no results, you may want to take a look here:
    OS X Mavericks: If you can’t scan
    http://support.apple.com/kb/PH14261
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Canon 70D Raw images won't work on my version of Elements 12.

    I know I need to get an update but not sure where to find.

    Thank you!  Worked like a charm.  I just installed elements  tonight and
    appreciate your help.
    Carolyn
    www.carolynkamuda.com (http://www.carolynkamuda.com)
    In a message dated 10/22/2014 10:34:33 P.M. Eastern Daylight Time, 
    [email protected] writes:
    Canon  70D Raw images won't work on my version of Elements 12.
    created by RKelly_ (https://forums.adobe.com/people/R_Kelly)  in 
    Photoshop Elements - View the full  discussion
    (https://forums.adobe.com/message/6858032#6858032)

  • Hi. I'm trying to install Lightroom 4 but it's not downloading. Lightroom 5 won't work.

    Hi. I'm trying to install Lightroom 4 but it's not downloading. Lightroom 5 won't work.

    You can try downloading Light room 4 from here:
    http://prodesigntools.com/adobe-lightroom-4-is-out.html
    Prior to install, do ensure that the machine is compatible & the machine has all the permission to download & install.
    Regards
    Rajshree

  • I installed iTunes 10.5.3.3 and now my DVD player won't work.

    I installed iTunes 10.5.3.3 and now my DVD player won't work and has this error:
    This device cannot start. (Code 10)
    Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
    Any ideas why iTunes renders my DVD drive unusable?  I have uninstalled and reinstalled iTunes and when reinstalling I had my device manager open and saw during the installation how my DVD player went from accessible to not being able to start.
    Why is this happening? 
    Here is my computer information:
    Dell
    Latitude D630
    Intel Core  Duo CPU T770 @2.40 Hz
    4.00 GB RAM
    32-bit Operating System
    Thank you,
    Kelly

    There's a few different possibilities with a code 10, Kelly. To narrow in on the likeliest culprits it would help to have a closer look at your system.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • I recently upgrade my mac air to maverick and now my version of iphoto won't work.  What can I do??

    I recently upgrade my mac air to maverick and now my version of iphoto won't work.  What can I do??

    This screenshot shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
    Note 1:  every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
    Note 2:  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1
    OT

  • Canon LiDE35 scanner won't work with latest CanoScan software

    I upgraded my MacBook Core Duo (2006) to Snow Leopard this weekend. All fine except even after loading the latest Canon Driver (lide35osx7721en.dmg) and restarting, then using CanoScan Toolbox 5.0.1.3 -- I get the message "Can't find Driver".
    If I go back to 4.5.1.2 version of CanoScan - it works OK! But the 5.0.1.3 software is easier to set, gives lots of choices - it should work, right? Has anyone tried this or can anyone comment. (I never got 5.0.1.2 nor 5.0.1.3 to work with Leopard either - but hadn't updated the DRIVER - now I have but it still can't "Find" the driver!)
    Thanks for any comments here - at least I can scan - and sure, maybe I could update this 5 year old scanner - but it works great!
    Best regards,
    Steve Schulte
    Tuesday 27 April 2010

    Hi Steve,
    The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
    Pahu

  • Installed MAC OS 10.9 and lost my NUMBERS PAD. Does not work at all.

    I installed MAC OS 10.9 and I lost use of the Numbers Pad inbuilt on my Apple keyboard.  Does not work at all.

    The option for Mouse Keys may have become turned on. To check for that, go to System Preferences > Universal Access, switch the view to Mouse, then turn Mouse Keys off if it is on.
    Note that in that same pane there is shown a keyboard toggle for that feature - press the Option key five times in a row to turn it off or on. If Mouse Keys is the problem, that may have been how it got turned on. You can prevent that from recurring by unchecking that item.

  • I can't open my MacBook because I installed mac keeper, which messed up my computer now my password doesn't work. What do I do.

    I can't access my MacBook because I installed Mac keeper, my password doesn't work, the stupid download messed up my computer. What should I do?

    Yes, MacKeeper is a known disaster and scam.
    Uninstall MacKeeper – updated « Phil Stokes
    Do NOT download or use the ‘MacKeeper uninstaller’ from the MacKeeper website.... as this will cause even more damage

Maybe you are looking for

  • How can I download files from my PC to my new I-Pad? Mainly PDF files. The manual doesn't make sense to me...

    I have read the manual on how to transfer a file from a computer to my I-Pad. It says in I-Tunes, go to devices Apps pane... I open the I-Tunes App and can not find anything referencing an Apps pane. What am I missing?

  • How can you erase a certain event from the iPad2 but keep it in iPhoto?

    I have two events that were split up by iPhoto when it synced to my iPad2. Collectively there re about 400 photos in the two events and they were split into over 50 separate events some labeled sequentially as 102IMPRT 103IMPRT....and so on, and oteh

  • Adobe cs 2 premium for mac

    We own a license for adobe cs2 premium for mac. Activation of the Internet is not possible, we tried the steps at (https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml). Herein install adobe cs2 contains Acrob

  • DiskWarrior won't boot holding down C key

    I have one of the first Minis (with the single core). Last week while doing routine maintenance I found out something is wrong with the volume (a node or something). I tried using Disk Utility to fix it, which didn't work, so I purchased DiskWarrior.

  • Workflows use function to update value.

    As part of a workflow I'm trying to update an object value using Function Evaluator. However when I set the Workflow parameter to "Target" and look through the list of attributes (Parameter attribute), I don't see the attribute I'm after. This attrib