Installed Maverick on new IMac and printer will not print

I purchased a new IMac in December after always having PCs so there has been a learning curve for me. A few days ago I installed the Maverick update. So far, so good except my printer no longer will print. I have a new Canon MC7120 printer/scanner. I am still able to scan, but not print. When trying to print, I have received a popup telling me to install software.
Would you be able to walk me through what I am suppose to do? I am assuming I am to install software again that I installed when I purchased the printer. Being new to Macs, I don't want to do something I shouldn't. Your help would be appreciated. Thank you

The printer is not listed as supported on this page:
OS X: Printer and scanner software available for download
You may be able to get it to work with the software from here:
Canon U.S.A. : Consumer & Home Office : PIXMA MG7120

Similar Messages

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

I installed iTunes on new laptop and it will not allow me to put songs to my phone

I installed iTunes on new laptop and it will not allow me to put songs to my phone

Make sure you have the latest version of iTunes, which is available here -> http://www.apple.com/itunes/download/
Then try following the steps in this Apple article to create an account without a credit card -> Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Printer has new all new ink and still will not print

I just got back to school and unpacked my HP Photosmart 5514 CQ183A printer. Upon trying to use it I noticed the ink was empty, so I went to the store and bought brand new 564 ink in every color. I installed them all properly and went to print again, and it still did not work. So I pressed "clean printhead" in the tools menu. Ink slowly started to appear on the paper so I "cleaned the printheads" a few more times until it was all perfect. I then printed what I needed, turned my printer off and went to sleep. This morning I woke up and tried to print again and it is doing the same exact thing as last night. Worst part is, it says all of my ink except for black is now empty. How can that be when I just bought all of them last night and only cleaned the printhead 8 times and printed 2 pages of only black ink the night before??
I bought the printer in late June of 2012 and I only use it when I am at school 7 months out of the year. When I pack up and go home I put the printer back in the box with all the orginal packaging. I do not understand why a printer that has only been used for about 14 months is haveing this problem!

Hi hellohpthisisst,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5514, you are unable to print after replacing the cartridges.
I see you have done the printhead cleaning a few times to try and fix the ink issue you were experiencing, please remember when doing service tasks on the PS 5514 it will use some ink. However you're right, the cartridges should not be empty. I would like you to take a look here and make sure the cartridges are properly vented: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still running into print quality issues, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanks

There is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems.

I just installed a multifunction Lexmark Pro905 printer and it will not print from Firefox, but will from Explorer????

I just installed a multifunction Lexmark Pro905 printer and it will not print articles from Firefox, but will from Explorer??? Are there settings in Firefox to solve this??

When you initiate printing with {Ctrl + P}, are you able to select that printer in the Printer - Name box?
http://kb.mozillazine.org/Problems_printing_web_pages

I recently installed Mavericks on this iMac and upgraded to Adobe Cloud 2014 now InDesign CC 2014 fails to launch and I get a crash report. Has this happened to anyone else?

I recently installed Mavericks on this iMac and upgraded to Adobe Cloud 2014 now InDesign CC 2014 fails to launch and I get a crash report. Has this happened to anyone else?

It isn't happening to everyone else, but if there was a trend of it happening to a lot of people, that would probably show up in the official InDesign user forum. But there aren't a lot of crash reports there, so it isn't something that's happening to everyone. There are a couple, so you might look at those. But since there is not a huge wave of crash reports, the problem might be more related to a problem on the system rather than a problem with InDesign, like a corrupted font.
The best place to troubleshoot is probably over at the Adobe forum since the users there know InDesign very well.

Installed ios 6 on new iPad and siri will not work.

Good morning, I installed ios6 on the new iPad and siri will not work. Each time I try to use siri she says "uh oh, I'm having a problem. Please try again. I have tried turning siri off and back on again. Resetting the iPad, resetting the network, turning Airplane Mode off and on again. All to know avail. My iphone 5 works great and so does my wife's iphone 4s with ios6. I have called Apple support but there only suggestion was that the servers were busy. If that was the case my other devices would not work either. Plus the servers wouldn't be busy for four days. Any help anyone could provide would be greatly appreciated. I was looking forward to using siri on the new iPad and other folks don't seem to be having a problem.
Thanks, and have a great day.

Then you need to change your device details as this still says iPad2.
It's very possible Apple's servers have been busy for 4 days as not everyone downloaded iOS 6 on the day it was announced. I downloaded it last Friday, myself, as an example.
There are a millions and millions of people using Apple iDevices.
Just because everything went fine with the iOS 6 updates of your iPhone 4 and 5 doesn't mean something couldn't have gone wrong with an update to your iPad3
If the iOS update missed something during the download, I am not sure how to go about re-downloading iOS 6 to fix the issue you are having.

I have cs5.5 master collection. Replaced my iMac with a new one, used migration assistant, now on the new iMac the apps will not open,

I have cs5.5 master collection. Replaced my iMac with a new one, used migration assistant, now on the new iMac the apps will not open,

I found that out, so used the dvd install disk w the key and tried to install, ran to 87% complete then told me to close,
safari
safarinotificati
i closed safari, still wouldn't finish loading, i closed all safari notifications, nope, can't find any app called safarinotificati
New iMac, 10.10.2, photoshop ran perfectly on my old iMac with 10.10.2
so I cannot complete the loading,
John

OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility and Repair permissions for a temporary fix. How can I get a permanent fix?

After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
bettyfroomneedham

There's a lot there, so I'll start with the parts I can answer quickly.
The "ACL found but not expected..." messages can be safely ignored, so says this article
http://docs.info.apple.com/article.html?artnum=306925
(look below all the "SUID" examples)
I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
Please post back with the remaining point of concern.

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

test to see if it's installed, Flash Player Help

Just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

just bought a new pc and itunes will not open. I have tried thto repair and reinstall but still no itunes

Best route here is to uninstall iTunes completely using the Windows Control Panel.
Make sure you know exactly which version of Win 7 you're running.
Restart your computer from cold (with no iTunes).
Go to Apple website and download the correct version for your operating system. Install following Apple prompts.
Once installed, close iTunes.
Restart your computer from cold (with new iTunes).
Start iTunes - all should be operating well! Good luck ...

All non-Apple apps will not open on my phone. I restored as a new phone and still will not work

All non-Apple apps will not open on my phone. I restored as a new phone and still will not work

Hello there, KScotty.
The following Knowledge Base article offers up some great steps for troubleshooting apps installed on your iOS device:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

Installed Maverick on new IMac and printer will not print

Similar Messages

Maybe you are looking for