Installed Mavericks and now am stuck at welcome screen. Enter button does nothing. Help!

As my question says, I am stuck on the welcome screen for setting up mavericks. It won't let me select my country and move on. I tried rebooting with no effect.

Hey,
Try first booting up in safe mode (hold down the shift key when you hear restart chimes). See if that gets you in. If it does, back up any important files and then verfiy your disk by going to Disk Uitility.Then try restarting.
If you still can't get in you'll need to boot up in recovery mode (command-R) and then click "re-install OSX". This literally took 6 hours, but I'm finally able to use my computer and Maverick is installed. Also, just a note, re-installing the operating system shoudn't delete everything on your hard drive, so don't panic if you haven't backed up. But always back up just to be safe!
Good luck!

Similar Messages

I've just installed Maverick and now can't open iPhoto. I have 9.2.1 currently installed. Am terrified I'm going to lose photos as they weren't all backed up. What do I do? Please help...

I've just installed Maverick and now can't open iphoto. I have 9.2.1 currently installed. Please help - am terrified I've lost my photos as they weren't all backed up.

Pogs78,
first things first — buy an external drive to use as a Time Machine backup destination and make a back up. That way, you won’t lose anything which is currently on your MacBook Pro.

I recently installed Maverick and now my Mac is running very slow

i recently installed Maverick and now i am running very slow.

Please download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic tool by a regular Apple Support forum user and contributor named Etresoft.
Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and installed software.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.

Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

Hi Linda,
Unplugging it from AC power will drain the PRAM Battery in short order, thereby losing setting, like Monitor resolution.
You can test the Pram Battery by disconnecting from the Internet so Date/Time doesn't update before you see it, shutdown, unplug AC for a bit, startup & check Time.
In Sys Pefs>Displays, can you set the resolution?

G'day Matt Vass from AUS. I just installed mavericks and now garage band won't start due to BFD folder invalid,

Hi there, hoping for help pls. I just installed mavericks and now garageband old version won't start because the BFD folder is invalid.

Click Software Update from your Apple menu  drop down menu.
If there's nothing available from Software Update, you may need to purchaase the newest GB version 10.0.2 from the App Store.

I installed Mavericks and now I can't print to my brother HL-2040 through the network

I installed Mavericks and now I can't print to my brother HL-2040 through the network, it does not see the printer

Here's the link to that article:
http://support.apple.com/kb/PH11143
However it has not been updated to refelct if it works with Mavericks

I tried to install maverick and now my keyboard keys F10,F11, 7,8,9 on the number pad don't work on my iMac. How do I resolve this?

I tried to install maverick and now my keyboard keys F10,F11, 7,8,9 on the number pad don't work on my iMac. How do I resolve this?

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

TS1362 just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

just purchased new cpu ,windows 8 recieved new updates and now I Tunes not play when play button hit.nothing happens??Rsvp please .time is fleeting:)

RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

HT201364 i have installed mavericks and it keeps logging out frequently on its own. Please help

Hi
I have installed mavericks and it keeps logging out frequently on its own. Does anyone else have this problem? What do I do? Please help.

Check Security & Privacy system Prefs, general tab. Click the padlock, then authenticate. Click advanced tab.
Check to make sure it isn't set to log out after a certain amount of time.

I have no recovery HD, tried installing Mavericks and now i can't acces lion either so I'm stuck with no OS.

Hello, im really mad and desperate.
Was in lion and needed xcode 5 so I downloaded mavericks installer
Double clicked mavericks and began installation
I wanted to install over lion with no backups, had no important files already left.
Installation failed for some reason.
Now everytime i boot my mac, the os x maverick installer shows up, but i cant select lion (i have 3 disks available for install none of which are candidates, since one is bootcamp , im here now, and the others are disk04 and disk06 iirc)
I don't have recovery HD, when holding down option in boot I ONLY SEE MAVERICK OS X INSTALLER AND BOOTCAMP OPTIONS , i have tried cmd R, holding alt, etc and I CAN'T IN ANY WAY ERASE, RESTORE OR WHATEVER lion hd.
I was able however to boot lion in safe boot mode, but that's no use since its really slow and buggy. I need answers, I don't want to buy another HD for something that Apple advertises as "Just download and install" which completley ruined my mac.

In that case you can do Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
This will install Lion since that was the version pre-installed on your computer. From there you can upgrade to Mavericks.

HT6114 I installed Mavericks and now safari wont work. Help!

I gleefully installed Mavericks thinking I was doing the right thing. After an hour of figuring out that I had internet connectivity but Safari wasnt working I spent several more hours trying to figure out what to do . I did not back up the system before I upgraded (brillinat decision on my part) but now I am stuck. Do I just use Firefox or chrome which dont seeem to have problems and wait until Apple comes out with a fix or???? I thought getting an Apple was supposed to avoid this kind of issue.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Installed Mavericks and now the contact app no longer allows addressed to be copied, dragged or any mode of movement to the email.

I installed Mavericks this morning. When using email within Mac I use the contact list and double click on a
list. Today, I can no longer use that. The addresses do not move. I tried the icon on the task bar.
That is essentially the same.
What good is the address book if it will not allow the addresses to be accessed. Other than typing
the first letter of each person I am mailing to. That's just ridiculous.
Also when I go on the internet, I lose one quarter of the page to needless book marks, or reading lest or shared links.
They used to be on the task bar, out of sight. Now I have to have one big blob removed from my viewing screen.
All this after 5 minutes of Mavericks. I am thinking of going back to Moutain Lion if I can.

I am frustrated by the same problem. I have been using OSx since the beginning. And, all that time, through every interation, by double-clicking on an entry in the Address panel, I was able to bring up a new mail compose window and have the address entered in the To: line.
No more. In Mavericks a new compose window does indeed come up when an address is double-clicked, but the adress does not get entered on the "To" line. I have to click the "To" button (on the address panel), an extra operation.
If someone knows how to restore the original sleek functionality of having the address moved, please tell me.

Installed Mavericks and now macbook not turning on! Please help!

Last night I installed Mavericks onto my lap top. I let it install overnight and this morning I finished the process by signing into my lap top. I then just proceeded to fix my top sites before heading into work. I got to work and it turned on fine once again. It was not picking up the wireless signal and realized it didn't recognize the network so I had to add it once again. I picked up the laptop to move it closer to ethernet cable so I could simply copy and past the password from an email I needed to access. Once I moved it over to the new spot the computer went off. Now it won't turn on at all. The light in front blinks on and off as if it were in permanent sleep mode. I hold the power button and it seems to turn off, but when I hit again to turn on the light goes back to blinking on and off. I have no idea what happened between me moving it from one place to another to simply connect an ethernet cable to it. I don't know if Mavericks has anything to do with it. I really need some help.

You can try this:
http://support.apple.com/kb/TS1367
Try running AHT (Apple Hardware Teast)
http://support.apple.com/kb/ht1509
You can also bring it to a genius bar for a FREE diagnosis. It is a good idea to make anappointment first.
http://www.apple.com/retail/geniusbar

Installed Maverick and now iPhoto wont open, help

I've just installed Maverick from using Snow Leopard and now iPhoto won't open and the message"You can’t open the application “iPhoto” because it is not supported on this type of Mac." appears. Since I have hundreds of photos in iPhoto and iPhoto was supported on this mac previously how can I access them?

Since my last post I found some instructions courtesy of Old Toad. They might work for you.
Launch iPhoto with the Command+Option keys held down and rebuild the library if the photos are missing.
Run Option #4, Rebuild Database, followed by Option #1 if needed.

Installed Mavericks and now my system partition needs repair

Hi All,
I upgraded to Mavericks yesterday, but after the install my MBP's performance/responsiveness was substantially degraded.
Today (after reading posts from users experiencing similar issues on the forum) I ran disk utility. After verifying the disk, the utility told me there was a problem with my system partition, and that I would need to run disk utility from recovery mode (cmd + r).
I did so, and when I verify the disk from recovery it returns: "The partition map needs to be repaired because there's a problem with the EFI system partition's file system". When I attempt to repair the partition, I receive an alert that: "Live file system repair is not supported".
Now I can't even boot into the log-in page, and the only area I can access (aside from the blank grey screen with a picture of a folder on it) is the recovery mode. I would really like to avoid re-installing Lion from recovery mode and losing all my programs, settings, etc. Any advice would be much appreciated.
Thanks in advance.

My two cents: I upgraded to Mavericks and found the EFI corruption error when verifying permissions immediately afterward. Tried the install a couple of times to make sure it wasn't a fluke. I was unsure how to get Lion back on the laptop, as the Mavericks istaller had updated my HD Recovery to 10.9, and my back up was manually done; I wanted a truly clean install without using migration assistant or Time Machine.
However, by completley erasing my hard drive and doing internet recovery, Lion was available. I'm back in business with a clean install of Lion and won't be trying Mavericks again anytime soon.
Incidently, my OS volume was okay and I could use the computer. As far as I could tell, only the EFI partition was corrupted. Not sure of the long term effects of that, but assume I wouldn't be able to accept firmware updates in the future at the very least, and who knows what else might develop, as several of the other posters here are experiencing. Feel like I got off relatively lucky.
I mostly wanted to point out that the machine's original OS recovery should be available via internet recovery, even after the Mavericks install has removed that option from the HD recovery.

Installed Mavericks and now am stuck at welcome screen. Enter button does nothing. Help!

Similar Messages

Maybe you are looking for