Installed Mavericks and now macbook not turning on! Please help!

Last night I installed Mavericks onto my lap top. I let it install overnight and this morning I finished the process by signing into my lap top. I then just proceeded to fix my top sites before heading into work. I got to work and it turned on fine once again. It was not picking up the wireless signal and realized it didn't recognize the network so I had to add it once again. I picked up the laptop to move it closer to ethernet cable so I could simply copy and past the password from an email I needed to access. Once I moved it over to the new spot the computer went off. Now it won't turn on at all. The light in front blinks on and off as if it were in permanent sleep mode. I hold the power button and it seems to turn off, but when I hit again to turn on the light goes back to blinking on and off. I have no idea what happened between me moving it from one place to another to simply connect an ethernet cable to it. I don't know if Mavericks has anything to do with it. I really need some help.

You can try this:
http://support.apple.com/kb/TS1367
Try running AHT (Apple Hardware Teast)
http://support.apple.com/kb/ht1509
You can also bring it to a genius bar for a FREE diagnosis. It is a good idea to make anappointment first.
http://www.apple.com/retail/geniusbar

Similar Messages

  • Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

    Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

    Hi Linda,
    Unplugging it from AC power will drain the PRAM Battery in short order, thereby losing setting, like Monitor resolution.
    You can test the Pram Battery by disconnecting from the Internet so Date/Time doesn't update before you see it, shutdown, unplug AC for a bit, startup & check Time.
    In Sys Pefs>Displays, can you set the resolution?

  • My MacBook Pro shutdown after it said my USB was draining to much power and now won't turn on please help

    Hi my MacBook will not turn on after it said my USB was draining to much power, and it shut down and now won't turn back on please help

    USB power management is part of the SMC (system management controller).  Try to reset SMC: http://support.apple.com/kb/HT3964
    Then get a self-powered USB external hub.  It takes power from a wall socket and saves the MBP power system.  Starting at $20 at BestBuy and similar stores.

  • TS5254 My computer was shut off during an update, and  now it wont turn on ;( please help

    My computer was shut off during an update and now my Iphone wont turn on .. please help

    You will have to restore the phone using your computer. You may need to use Recovery Mode if it doesn't appear in iTunes: http://support.apple.com/kb/HT1212

  • I've just installed Maverick and now can't open iPhoto. I have 9.2.1 currently installed. Am terrified I'm going to lose photos as they weren't all backed up. What do I do? Please help...

    I've just installed Maverick and now can't open iphoto. I have 9.2.1 currently installed. Please help - am terrified I've lost my photos as they weren't all backed up.

    Pogs78,
    first things first — buy an external drive to use as a Time Machine backup destination and make a back up. That way, you won’t lose anything which is currently on your MacBook Pro.

  • I installed Mavericks and now I can't print to my brother HL-2040 through the network

    I installed Mavericks and now I can't print to my brother HL-2040 through the network, it does not see the printer

    Here's the link to that article:
    http://support.apple.com/kb/PH11143
    However it has not been updated to refelct if it works with Mavericks

  • I tried to install maverick and now my keyboard keys F10,F11, 7,8,9 on the number pad don't work on my iMac. How do I resolve this?

    I tried to install maverick and now my keyboard keys F10,F11, 7,8,9 on the number pad don't work on my iMac. How do I resolve this?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • HT4061 my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

    my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

    i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.

  • My ipad 3 froze and now is not turning back on what should i do?

    my ipad 3 froze and now is not turning back on what should i do?

    Hi,
    I have the same problem. My Ipad 3 was a bit slow/unresponsive, and then it just went blank. I pressed the home button to see if it would come back on, and it was extremely slow, but it did show me the home screen. However, then it went off and wont come back on at all now. I have tried charging, tried the reboot, connected to itunes (which cannot detect the ipad) and nothing is working.
    The ipad is only 2 months old, and no damage!
    Any suggestions? Thanks

  • My phone was updating the new software and now will not turn back on, what do i do?

    my phone was updating the new software and now will not turn back on, what do i do?

        Never fear, help is here jpeterson4! Have you attempted to plug your device into your home computer? Have you verified that the device is charged? Does anything appear on the device when you plug the device into a charger? Please keep us posted, thanks!
    MatthewS_VZW
    Follow us on Twitter @VZWSUPPORT

  • My iPhone 5s was updating while charging and now it not turning on or charging or reseting please helppp!!!!!

    My iPhone 5s was updating while charging and now it not turning on or charging or reseting please helppp!!!!!

    In the U.S. $199

  • I recently installed Maverick and now my Mac is running very slow

    i recently installed Maverick and now i am running very slow.

    Please download, install and run Etrecheck.
    Etrecheck was developed as a simple Mac diagnostic tool by a regular Apple Support forum user and contributor named Etresoft.
    Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and installed software.
    http://www.etresoft.com/etrecheck
    Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.

  • My iPod touch 5th generation isn't working. I plugged it in last night to charge and now its not turning on or responding to anything.

    My iPod touch 5th generation isn't working. I plugged it in last night to charge and now its not turning on or responding to anything.  It used to do this thing where it would freeze when it was 100% charged and plugged in and I was using it.  I'd just unplug it, restart it (home button and top button) and then it would be fine.  That had happened like 5 hours prior to me plugging it in again and then it going totally blank.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • G'day Matt Vass from AUS.  I just installed mavericks and now garage band won't start due to BFD folder invalid,

    Hi there, hoping for help pls. I just installed mavericks and now garageband old version won't start because the BFD folder is invalid.

    Click Software Update from your Apple menu  drop down menu.
    If there's nothing available from Software Update, you may need to purchaase the newest GB version 10.0.2 from the App Store.

  • My ipod froze then turned off and now will not turn back on

    my ipod was fully charged and was working perfectly.
    i locked it and when i tried to unlock it my touch screen wouldnt work.
    i tried reseting it by pressing the home button and the power button.
    it started to reboot then froze on the apple logo screen.
    after waiting for twenty minutes or so i tried reseting it again while it was still on the apple logo screen,
    then it turned off and now will not turn back on.
    i have tried plugging it into my computer to see if it would by some miracle turn back on but i have been unsuccessful
    my ipod is my life, if anyone can help me fix it i would greatly appriciate it!!!!!!!!

    See Here first...
    Frozen or unresponsive iPod touch
    If no joy... See here
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Goods receipt indicator mandatory

    Hi, We have a requirement where in the Goods receipt indicator on PO needs to made mandatory . We could do this thru the account assignemnt configuration. But the problem that we are facing is The GR based IV option also gets selected because of this

  • Show/Hide tabs in top level navigation of a role based on assigned services

    Hi, I have an interesting requirement. I have created an overview page in abap web dynpro which has links to various services. Based on the r3 roles assigned to the user, we need to show/hide the services in the overview page and top level navigation

  • Customizing POAPPRV: PO_PO_APPROVE notification to a role

    Hi gurus, I'm customizing POAPPRV workflow because I want to send PO_PO_APPROVE notification to a role. I've created a role (let's say 'FND_RESP|PO|MY_ROLE_NAME|STANDARD')and assigned user to this role. I've also created a custom workflow attributes

  • Stop database instances and restart server without the databases to start.

    We run Oracle database-server 10 enterprise edition release 10.2.0.4.0 64 bit pl/sql release 10.2.0.4.0 production. How do i restart the servet without the databases to restart f. eks using enterprise manager.

  • How to use the ConvertCoordinates in the AIHardSoftSuite in CS5

    Hi, I am trying to make a plugin with the CS5 version on MacOSX. This version has new functions for the rulers. You can have a ruler for each artboard and a global ruler for the document. There are new functions in AIHardSoftSuite to deal with the di