Installed Mavericks on headless (display-less) mini - now have SIX DISPLAYS trying to display!

How do I get mac mini to stop trying to display SIX non-existent displays after installing Mavericks. This is a headless mini (server for media etc.) I can't even get into the system prefs because they just wildly flash all over the place.

I recommend using SwitchRes X to build a custom timing with the follwing values:
Pixel clock: 74.160 MHz
Horizontal Active: 1280 pixels
Horizontal Front porch: 72 pixels
Horizontal Sync width: 40 pixels
Horizontal Back porch: 256 pixels
Vertical Active: 720 lines
Vertical Front porch: 5 lines
Vertical Sync width: 5 lines
Vertical Back porch: 20 lines
And check both boxes for positive sync polarity.

Similar Messages

After installing mavericks apple id is greyed out in app store when trying to update iPhoto

after installing mavericks apple id is greyed out in app store when trying to update iPhoto. How to update iphoto?

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
Other...
A sheet will drop down. In that sheet, select
Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
Quit and relaunch the App Store. Test.
If you find these instructions confusing, ask for an alternative method.

I purchased Lightroom 5 and Elements 12 and installed them on a computer. I now have a new computer, and wish to install them on the new one. When I tried to do so, my only option seemed to be Adobe Cloud. When I was asked for my LR serial number, it was

I purchased Lightroom 5 and Elements 12 and installed them on a computer. I now have a new computer, and wish to install them on the new one. When I tried to do so, my only option seemed to be Adobe Cloud. When I was asked for my LR serial number, it was not accepted. Please help me install these two products; I prefer stand-alone, rather than a monthly fee. Thank you

PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

My whole document comes out as low res when I export to PDF, even the indesign file also now low res. Tried changing display performance, but that's not helping.

My whole document comes out as low res when I export to PDF, even the indesign file also now low res. Tried changing display performance, but that's not helping.

Are your links up to date? What settings did you use?

Installed an Windows 8.1 update yesterday; Now coputer freezes when trying to print from Adobe Reader. Can print from MS word

Installed a Windows 8.1 update yesterday; now computer freezes when trying to print from Adobe Reader XI. Still can print a word document from MS Word.

Was already running latest version 11.0.10. Tried the re-load fix; tried uninstalling and installing a new one from the web. Problem still exists -- cannot print any document from Adobe Reader XI. Computer freezes when the print file is being prepared at 0%.
Jamesk71259086

Clean installed mavericks but it is dead slow now

I recently bought an old Macbook pro. It had previously installed with 160GB(7200rpm) of hard drive.
I updated this with mavericks 10.9.3 . And it was perfectly fine. rather super perfectly fine. Yesterday I upgraded its internal Harddrive with 320GB from my other laptop because I needed more space for my tutorials and data etc.
I installed mavericks on my newly installed HDD320GB(5200rpm). using USB8GB-2.0. Now my MBP is dead slow.. I installed mavericks, 3 times, but still slow slow and dead slow. It took 6 mintues to boot. previously about 4 ~5 hrs in installation..
After booting, I checked in Activity Monitor. and i see CPU on the bottom says.
System: 1.21%
User: 0.95%
Idle: 97.XX%
But If i keep staring on this It varies but still Idle is around 92% ~ 98%. and sometimes 45% to 70% I don't know which application is consuming my processor..
And If I open any application during this Activity MOnitor process it show fairly used processor like. idle is about 80%. But still every application responds too late.
Luckily I didn't remove mavericks from the older 160GB HDD. I booted my computer from that HDD as using external USB converter. But this time once again may macbook pro is super fine. It booted in 18seconds around. every application works great.
I want the same speed on my internal HDD, what is the problem...
I don't know what's wrong either with my newly installed 320GB-HDD or what.?
I'm using
2.5Ghz Intel Core 2 Duo
4GB- RAM,
NVIDIA GeForece 8600M GT 512 MB
OSX 10.9.3
Can somebody please tell me the solution, what's wrong with it.? I'm almost crying :(.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have a Macbook Pro Early 2011 from the USA. After installing Mavericks, Adobe CS6 crashes whenever it is plugged into a 27inch cinema display I purchased from the apple store in China (We moved to China). It works when not plugged into 27inch display.

I have a Macbook Pro Early 2011 from the USA. It is now running Mavericks. I connect it to a 27" Cinema Display that I bought in China after we moved to China. Before I installed Mavericks, I could run all of the Adobe CS6 and Adobe CS5.5 applications on my Macbook Pro while connected to the cinema display. Now that I have Mavericks installed, whenever I am connected to my 27" CInema display my Adobe applications crash upon opening. I know this is a rare scenario, but does anyone have any ideas how to fix this problem? Is there a new driver that needs installed? I'd appreciate any help.

I am also having a similar issue. I used Adobe Lightroom and my whole display goes black. Even my laptop screen and the lights on the keyboard go black. I can still hear the fan running, so I assume it is just the display. This is my first Mac and I have had nothing but issues. I think I am going back to Windows after this.

Help! I installed Maverick on my MAC yesterday and now I can't open safari

I installed Maverick and now nothing happens when I click on the Safari icon. Can this be fixed?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I installed Mavericks on my macbook pro and now I want to go back to Lion, is this possible and how?

I'm not satisfied with OS X Mavericks and I'd like to go back to OS X Lion! How do I do this as easy as possible?

Erase your hard drive and install your Lion system backup. If you don't have a Lion backup, the you can do an Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

I did Archive &amp;amp;amp; Install with "preserve users", why do I now have NO users?

After a hard crash on my mom's PowerBook G4 (running 10.4.11) I eventually did an OS 10.4 Archive & Install with "preserve users". I now have NO users, not even an administrator, what should I do? The only indication I see that anything was remembered is the login screen does say:
Mac OS X
Jane Brown's Computer
(But as I recall, there's a bug that sometimes that personalized text sticks around forever once it's set the first time in the OS)
None of the login names or passwords I remember work. I checked using a boot DVD with the "Reset Password" utility, but the only user it sees is "System Administrator (root)".
I can think of 2 options from here, but I'd like advice, or another option. One...I could somehow force Setup Assistant to run (how?), create a new administrator, and then do...some process to get back the one user setup I care about (my mom...her files, etc)?
Or two...I'm not a COMPLETE idiot with Unix (but close)...could I find an old, working Netinfo db and restore it and fix things that way? I did that years ago, following instructions. I don't know if there is a working Netinfo around though. In single-user mode I tried "ls" while in /var/backups/ and saw nothing at all.
The history of how/why I did the Install:
My mom's system freaked-out and crashed hard during normal operation (she was just launching AppleWorks)...subsequently all attempts to boot left it at a completely black screen with a single white cursor block in the upper left. No prompt though, and unresponsive to anything I typed, so I wasn't in a normal Darwin. The only way it could be powered-down was to hold down the power key for 10 seconds.
I tried various things...reset PRAM, used "Disk Utility" from a boot DVD (it found no disk problems...though Repair Permissions refused to run, it kept losing connection to the HD), Safe-Booting (which didn't work, it hung with a blue screen, gray Apple logo, no spinning gear), etc. Nothing worked. Booting in verbose mode did go part way, then it stopped with some kind of disk I/O complaint. I forgot to write it down. My guess, since disk repair found no disk problem, that an OS file was corrupt, and trying to read that resulted in an I/O error.
So I did an Archive & Install with "preserve users". All seemed to go ok. Until I tried to login.

I followed the steps, the new accounts are there, but they aren't working properly. The primary account worked ok once.
Based on the behavior of 2 accounts (primary admin, + my mom's), even under Safe Boot, it seems like there's something that's failing during login that causes all attempts to login to succeed partway, then crash, and throw me back to re-login.
What happened: I had reset the Netinfo, & created a first admin matching before. After a long time, I got a normal desktop (& it had the desktop icons & Dock layout of the previous primary account). I created the next 3 users (there were no gaps), and then set it to auto-login to my mom (standard user).
If I Safe Boot so I can try logging-in as the original admin, I get a menubar, a customized Dock (with an odd, empty white square in place of one of the icons), and a spinning beachball against an empty desktop for a while, then it drops me back to the login screen. Same thing if I try my mom's account while Safe Booted.
I have a 2nd admin account, if I try that while Safe Booted, I get a menubar, empty desktop, and an endless spinning beachball. I have to hold down the power key to shutdown.
I tried holding the shift key immediately after login (disable startup items) to see if that helps, but it didn't. Doesn't even seem to work right, because when I boot normally to auto-login to my mom's account, even with shift, her startup item is still launching (a simple app that timestamps a file).
If I don't Safe Boot...it does auto-login to her account, I get a beachball, it slowly builds her entire desktop back just the way it used to be (desktop icons, customized Dock)...then it crashes to a blank blue login type screen and tries all over again, endlessly trying to login, crash, try again. I have to use the power key to force a shutdown.
Force Quit (via the keyboard) never helps in any of the situations, I get no popup window.
I did use Disk Utility again to see if it repaired anything, but all it fixed were a few permissions, which didn't change anything.
What next? What would you suggest now? They're almost working. Is there a log I can examine in single-user mode that would tell me what's failing during login? Should I reset the Netinfo db again and re-create users? Do I need to install again? Preserving or not-preserving users?

Can't install mavericks on 10.6.8. I have Macbook pro from 2011.

Trying to install Mavericks with snow leopard 10.6.8. I checked and my Mac Book Pro from 2011 has enough memory and fits all requirements for being able to install Mavericks. I get half way through download and then every time it says error downloading and stops downloading.

See Eric Root's suggestions here: Re: can't update to mavericks on early 09 iMac

I purchased and installed Parallels Desktop 8 for Mac, I now have to purchase the Microsoft Word software, is the student edition my best bet? I have a MacBook with 2 gig of RAM, and am curious as to any advice anyone has, thank you.

I purchased and installedParallels Desktop 8 for Mac, I now have to purchase the Microsoft Word software, is the student edition my best bet? I have a MacBook with 2 gig of RAM, and am curious as to any advice anyone has, thank you.
I currently have 71.88 GB out of 118.86 of HD memory available
These is the system overview:
Model Name:          MacBook
Model Identifier:          MacBook2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          4 MB
Memory:          2 GB
Bus Speed:          667 MHz
Boot ROM Version:          MB21.00A5.B07
SMC Version (system):          1.17f0
Sudden Motion Sensor:
State:          Enabled

the student edition is the best of you are a student and can get the discount.

HT5019 MacPro laptop display and 2 external monitors (three displays). Can I have more than one application displayed at a time?

I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.

I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.

Installed Mavericks on headless (display-less) mini - now have SIX DISPLAYS trying to display!

Similar Messages

Maybe you are looking for