Installed memory 4GB (932MB Usable )

i cannot fix this proble.
please reply fast.
i can't download cpu-z from geven link.

Hi,
There was a fix implemented in Bios version F.25 for your notebook series that corrected an issue with machines not using the full memory capacity when running a 32bit OS in conjunction with greater than 2Gb of ram being installed.
As HP Bios Updates are cumulative, you're probably better off just installing the latest version ( F.26 ) which can be downloaded from the link below. Although not noted on the page, the cva file lists this update as compatible with the following operating systems.
W732EN=OEM
W764EN=OEM
W732HB=OEM
W764HB=OEM
W732HP=OEM
W764HP=OEM
W732PR=OEM
W764PR=OEM
W732SE=OEM
W732UL=OEM
W764UL=OEM
W832=OEM
W864=OEM
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134311-1&cc=us&dlc=en&lc=en...
Note: Once started, do not interrupt the bios update in any way until it has completed - the machine may perform several restarts and may appear to be doing nothing for short periods of time, but just let it complete until it has loaded back into Windows.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

NF520T-C35 - Installed memory 4GB, usable 2GB

Hi. I have a problem with memory. Today i installed another memory to my computer. But in Windows it shows Installed memory 4GB, usable 2GB. I cannot find in BIOS "Memory Remap Feature". Can anyone help me?
I have a newest BIOS.. version 1.7
And i use Windows 7 Ultimate 32-bit

What else you have? >>Posting Guide<<

Windows 7 Build 7100 - Installed Memory 4Gig (3Gig usable)

For some reason my T60p only see 3Gig out of 4Gig installed when using Windows 7 Build 7100. Any ideas? Here's my system configuration
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7100 Build 7100
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name XXXXXX
System Manufacturer LENOVO
System Model 2613CTO
System Type x64-based PC
Processor Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date LENOVO 79ETE3WW (2.23 ), 9/12/2008
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7100.0"
User Name
Time Zone Central Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.00 GB
Available Physical Memory 1.99 GB
Total Virtual Memory 5.99 GB
Available Virtual Memory 4.76 GB
Page File Space 3.00 GB
Page File C:\pagefile.sys

t43,
I don't remember what chipset was in the T60p, but I am sure they are all the same and will not address more than 3GB of memory even though the processor fully supports the 64-bit instruction set. I don't believe that there are any programs out there that can tell you what particular chipset is installed in a system but use can use the link below to find a number of motherboard enumeration programs. I tried the HWINFO32 program and it is quite good.
http://www.stevenscomputerrepair.com/Motherboard%20Chipset.htm
To summarize, yes, on 3 GB systems, you are better with x86 than x64.
Note that since I wrote my original post, I purchased a new T500 with 3.06 GHz processors and 4GB memory. I am now running x64 and I must say that the system is much faster than x86. Photoshop (or Photopig as I call it) loads in 1-2 seconds. Can't wait for the price of the 4 GB DIMMs to go down so I can go to 8 GB memory!
Pierre

1016 Megabytes Usable Installed Memory

TOSHIBA Satellite Pro A300 PSAJ1E-00Y006EN
1.73 gigahertz Intel Pentium Dual
64 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Windows XP Professional Service Pack 3
I have had some issues since a very nasty Adwear attack , (Jeff) very kindly help with the 1st issue my sound, but I now have a Lap top that when starting up goes to a Blue screen for about 0.25 talks about dumping memory then re-boots.
Ran Beleric Advisor and noticed that (1016 Megabytes Usable Installed Memory) ?
I do not have a suitable re-boot point , and my XP disc has well gone !
Can any one help ?

So do I have an issue with unstable Memory ?
What's all the memory business about? So far as I know, neither of us have "unstable memory."
Ran Beleric Advisor and noticed that (1016 Megabytes Usable Installed Memory) ?
Nothing wrong with that. According to the spec, you should have 1 GB of memory.
Your bug check (Blue Screen of Death) was caused by a Kaspersky file (flcss.sys). Here's how to tear that stuff out by the roots. If you have a different one, I'll look it up for you.
   How to uninstall Kaspersky Virus Removal Tool 2010?
   How to uninstall Kaspersky Internet Security 2010?
   How to uninstall Kaspersky Anti-Virus 2011?
   How to uninstall Kaspersky Internet Security 2011?
Here's where to get Microsoft's free AV program.
   Microsoft Security Essentials
You do not want to have two AV programs running at the same time.
-Jerry

I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unabl

I have a mac computer 3.2 Ghz intel core i3 with memory 4GB 1333 MHz DDR3, I have recently purchased an new macbook and have yosemite software and iCloud . I can no longer us my mac to open up recent numbers documents from my macbook. I am unable to upgrade to allow me to get the current numbers version on my mac. What do I need to do to get all my machines woking in harmony again

On each machine turn on iCloud and sync all the available apps. Apple explains how to set up iCloud in http://www.apple.com/icloud/setup/
After doing this run software update on each machine and install all the suggested updates. If you still need help installing the most up-to-date versions of iLife and iWorks open the Mac App Store - click the Purchased tab and update all that need to be updated.

My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

My start up disk Macintosh HD is full on my McAir OSX 10.9.4 memory 4GB. I need to clear the disk so that I can update it with the new software IOS 10.9.5 requiring 2.05GB. Need guidance on how to clear space.

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

How do I install memory into the Pavilion 17z-F2 series laptops?

How do I install memory into the Pavilion 17z-F (17z-F200, product L2H13AV) series laptops?
HP appears to have no maintenance guide available for this model series. What's up with that?
Please, do not offer the generic (and out-of-date) Pavilion 17 Notebook PC Maintenance and Service Guide. It does not appear to apply to the 17z-F series. This guide instructs to remove the bottom service panel which I could have figured that out on my own. However, the 17z-F series does not appear to have any removable panels at all. I took an up-close look at the Pavilion 17z-F100. And, it does not have any removable panels on the underside, except for the battery. So, I presume the 17z-F200 to be the same.
I am a computer technician. And, this is the first laptop I have seen without any service panels. I am probably going to have to disassemble the entire outer-shell to install memory (or to replace the hard disk drive once the time comes). But, every laptop I have worked on in the past had its own special array of hidden screws or special tricks for disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

How about this one:
Pavilion 17z Manual
Don't get me started on this. It's one of my pet peeves, too. HP is not the only one doing this. Acer and Toshiba, etc. also are selling "closed" systems now. I hate it. I will absolutely never knowingly buy one but I am spending a lot of time here answering questions just like this. Good luck and let us know how you do. Sounds like you will be fine.
If this is "the Answer" please click "Accept as Solution" to help others find it.

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)?
HP appears to have no maintenance guide available for this model. What's up with that?
I took a look at the Pavilion 17z-F100 (sent by mistake). It does not have any removable panels on the underside. And, the User Guide for the 17z-F200 indicates that it will be the same (assuming it ever arrives).
I am probably going to have to disassemble the entire outer-shell to install memory (or replace the hard disk drive, once the time comes). But, every laptop I have worked on in the past has had its own special place for hidden screws or special trick to disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

@DLBurkhart ,
Hello and thank you for posting on the HP support forums. Here is a link to the HP Pavilion 17 notebook Maintenance and service guide.
HP Pavilion 17 Notebook PC Maintenance and Service Guide
In the guide you will find the instructions on how to access the memory module and as well you should find the supported memory configurations.
I hope this was helpful.
Thank you for posting and have a great day
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Having trouble installing memory

I have tried installing my new memory twice (in my brand new 'puter), and the profiler still does not recognize it (empty!). If I have apple care, should I bring in my computer for someone to look at why it isn't recognizing it? I have installed memory before, and I cannot figure out why this isn't working - and of course I don't want to break it! Thanks!

It takes a lot of pressure to properly seat the modules in the new systems (iSight Versions).
But, if you are feeling unsure, the peace of mind might be worth paying a shop a small installation fee.
AppleCare would only cover the service if a defect is found with the computer. If the machine were found defective, then they might install the module for free after the repair was made.
I had one installed in my computer (which I supplied) when they replaced my logic board.
I could install it (and have previously), but I decided to let them do it when they had the machine open already. They didn't charge me since they would have had to re-install any installed memory anyway after the repair.

I have a macbook pro 13' (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks. Everything has slowed down. How do I go back to the older OS X Lion? Or should I improve speed differently?

I have a macbook pro 13’ (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks 10.9.5. Everything has slowed down and the battery lasts a bit earlier. How do I go back to the older OS X Lion? Or should I improve speed differently? Would improving memory to 8GB help?

i have run the EntreCheck and here is the report:
EtreCheck version: 1.9.15 (52)
Report generated 28 September 2014 16:16:39 GMT+3
Hardware Information: ?
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 4:59:22
Disk Information: ?
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (203.96 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Vodafone (ZTE) Vodafone Mobile Broadband K3565-Z
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.ZTE.driver.ModemDriverMac (1.0.2d1) Support
[loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.1) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ?
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
StartOuc: Path: /Library/StartupItems/StartOuc
Launch Daemons: ?
[running] cn.com.zte.PPPMonitor.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] PPPMonitord.plist Support
Launch Agents: ?
[running] cn.com.zte.usbswapper.plist Support
[running] com.hp.devicemonitor.plist Support
[loaded] com.hp.messagecenter.launcher.plist Support
[running] Swapper.plist Support
User Login Items: ?
iTunesHelper
Dropbox
Internet Plug-ins: ?
SharePointBrowserPlugin: Version: 14.0.0 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions: ?
AdBlock-2
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
MacFUSE Support
Tuxera NTFS Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      5% Safari
      3% WindowServer
      2% BitTorrent
      2% hidd
      0% softwareupdated
Top Processes by Memory: ?
229 MB Safari
160 MB softwareupdated
156 MB com.apple.WebKit.WebContent
135 MB com.apple.IconServicesAgent
102 MB VLC
Virtual Memory Information: ?
45 MB Free RAM
1.55 GB Active RAM
1.52 GB Inactive RAM
895 MB Wired RAM
628 MB Page-ins
0 B Page-outs

Retrieving installed memory on host system via SQL

A spart of an SQL based report I am writing, I should like to obtain the installed memory on the host machine (which Oracle is running on) to aid memory allocation issues.
Is this value held withing an Oracle table or, if not, is it available from other methods? I am not sure if I could use an os command to retrieve the value.
The host is AIX (Unix)
DB is Oracle 9.2
Many thanks

Thank you very much, that worked.
Using host lsattr -E -l sys0 -a realmem | awk '{ print $2 }'
I obtain my actual value.
However, I need to be able to return it via a SQL select statement, since I am using a ADO method to run a single SQL statement and return a single value.
Can this be done, do you know?
Many thanks

Check installed memory with physical memory

I need to check whether Physical memory is same as installed memory of multiple servers.
By using win32_computerSystem command, i can get the physical memory, but how do i get the installed memory using powershell?

I've tested the functions myself and modified your functions like this so it works
function CheckPhysicalRam($Server)
$PhysicalRAM = (Get-WMIObject -class Win32_PhysicalMemory -ComputerName $Server |Measure-Object -Property capacity -Sum | % {[Math]::Round(($_.sum / 1GB),2)})
return $PhysicalRAM
function CheckInstalledRam($Server) {
$InstalledRAM = Get-WmiObject -Class Win32_ComputerSystem -ComputerName $Server
$InstalledRAM = [Math]::Round(($InstalledRAM.TotalPhysicalMemory/ 1GB))
return $InstalledRam
function CheckRam($Server) {
$InstalledRAM = CheckInstalledRam($Server)
$PhysicalRAM = CheckPhysicalRam($Server)
if ($PhysicalRAM -eq $InstalledRAM)
return "pass"
Else
return "fail"
Can you see if this is the thing you want ?
Tested it with my test win7 laptop and other win7 devices in my domain.
for my win7 32bit with 8GB physical and 3.41 available it says fail
for other win7 64bit devices with 8GB physical and 7.xx availble it passes.
You can also do it in one function, like this:
function CheckRam($Server) {
$PhysicalRAM = (Get-WMIObject -class Win32_PhysicalMemory -ComputerName $Server |Measure-Object -Property capacity -Sum | % {[Math]::Round(($_.sum / 1GB),2)})
$InstalledRAM = Get-WmiObject -Class Win32_ComputerSystem -ComputerName $Server
$InstalledRAM = [Math]::Round(($InstalledRAM.TotalPhysicalMemory/ 1GB))
if ($PhysicalRAM -eq $InstalledRAM)
return "pass"
Else
return "fail"

I installed memory to my 2007 imac. When I turn the computer on it is making a strange noise and the screen is blank

I installed memory to my 2007 imac. When I turn the computer on it is making a strange noise and the screen is blank

Are you hearing beeps?
What was the spec of the RAM?
What was the brand of RAM?
Have you double checked that the RAM is properly seated?

A700: 8gb of memory installed, only 4gb are being used

The a700 that I purchased from lenovo.com was the top model (40244JU) in the a700 series and came with 8gb of memory installed. The os system screen properly shows the 8gb of memory installed. The bios screen shows only 4gb of memory installed, thus only 4gb are being used by the computer. Please tell me how to update the bios since there do not seem to be any bios updates for the a700 on lenovo.com.
Thank you.
Moderator edit: Matched subject to content.

Dear Customer
- There are several additional situations that could cause the usable RAM to be less than expected. These issues and possible solutions are listed here:
Check the system configuration settings
This problem may occur because the Maximum memory option is selected incorrectly. To fix this, follow these steps:
Click Start
Collapse this imageExpand this image
, type msconfig in the Search programs and files box, and then click msconfig in the Programs list.
In the System Configuration window, click Advanced options on the Boot tab.
Click to clear the Maximum memory check box, and then click OK.
Restart the computer.
Full Ram will be working properly
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Installed memory 4GB (932MB Usable )

Similar Messages

Maybe you are looking for