Installed MSI R5770 Hawk but PC says: HD 3200

Hello to all. I just purchased and installed A MSI R5770 HAWK video card. I installed all the software and everything looks good, but after I finnished the install through the ATI Catalyst manager, I clicked on "View log" and it said: Hardware info= ATI Radeon HD 3200 Graphics
Did I do something wrong? I believe that the HD3200 is the on-board graphics(maybe). What should I do to get the most out of this GPU?? I do have monitor hooked up threw the HDMI on the card and I have good pic., I just thought that the Hardware should say: "ATI HD5770 " shouldn't it?
By the way I did search the forms before I posted, just in case you notice that this is my first post. Many Thanks, >>>>RiZ<<<<<

Yes, the HD3200 is integrated and not related to MSI R5770 HAWK
So the 5770 is not detected by the system or?
Have you checked in device manager? Is it listed there?
Check with also with AIDA64 At Display, GPU page:
http://www.aida64.com:8081/aida64extreme150.exe
Read >>Posting Guide<<

Similar Messages

Questions about my MSI R5770 Hawk Radeon HD 5770 and my Dell Studio 7100

Ok, I have had this card installed for about a year now. From the beginning Catalyst Control Center had given me error messages, "Catalyst Control Centre: Host application has stopped working. Windows is checking for solutions" every time I start the machine or every time I try to use the Catalyst Control Center. This has not been a problem because I have been using a 2 monitor system using the DVI port from on and the HDMI to Display Port adapter to the second larger monitor (if I went straight HDMI I can't change the settings and I end up with a 1 inch black border around the desktop and the outer edge of the 23" monitor,) so I just worked around with the HDMI to DVI. Well now I am trying to hook up three monitors. One to the Display port through a Displayport to DVI, one to the HDMI through the HDMI to DVI and one to the Display port. No matter what I try to do through the Windows display control panel, I can not get the displayport monitor (which ever is hook to that port) to display. Windows 7 does detect all three monitors, but it will not allow me to "extend the desktop" to the third monitor and I still can't get the Catalyst Control Center to work.
I have uninstalled all files from ATI or AMD that involve the video and reinstalled the latest drivers and software, but the Catalyst Control center still is not running.
If you could help me with this it would be great. I am a graphics designer and web designer/developer and not a hardware or software tech and I have been googling and trying different possible answers since yesterday morning.
My graphics card is
MSI R5770 Hawk Radeon HD 5770
My computer is
Dell Studio XPS 7100, AMD Athlon IIX4 630 Processor 2.80 GHz
8 gb
64-bit operating system
I am attempting to hook up a LG W2361 to the HDMI through HDMI to DVI adapter (presently working) at 1920 x 1080
an LG W1952 (at 1440 x 900) through the DVI port to DVI (presently working) and
an old Samsung SyncMaster 170t to the Displayport through a the adapter (not working) monitor is detected but it will not allow the extend desktop to be applied.
Hope someone can help, thanks in advance for just reading all of this.

Just incase anyone runs into a similar problem. I figured it out.
Somehow in one of either the ATI driver updates or in a Microsoft update, my drivers and software was contaminated. I deleted all software and drivers for the card, which I had already tried several times. But this time I went into safe mode used CCcleaner in safe mode and cleared the register of all entries. I then reloaded and the Catalyst Control center and it works fine now.
The problem with the three monitors seems to be that the one hooked to the displayport, if you are using more than 2 monitors, must be hooked to an active displayport adapter. I was using a passive adapter. So either I need to buy a very expensive adapter or.....maybe a new monitor that uses displayport.
Hopefully this will help someone else having this issue.

I have downloaded infinity blade 3 and then deleted it because i wanted to install some other apps. but now i am trying to install the game again but its saying error 0xE8000004. I have about 6.5 GB space on my iPad. what should i do..

I have downloaded infinity blade 3 and then deleted it because i wanted to install some other apps. but now i am trying to install the game again but its saying error 0xE8000004. I have about 6.5 GB space on my iPad. what should i do..

These might help
http://support.apple.com/kb/TS3221
http://support.apple.com/kb/TS3694

Help i just installed a trial cloud but it saying its expired

help i just installed a trial cloud but it saying its expired….that premiere expired and i literally just started this account, this is my very first time creating account

http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

MSI R5770 Hawk is out and Here it is!!!

Guess what has dropped by on my doorstep. A HAWK series 5770 video card. With the successful high-end LIGHTNING series that MSI offered before, they now produced this mainstream product line.
This video card is custom build with MSI’s Military Class Components, Twin Frozr II cooler , MSI’s own custom PCB Design with Voltage checkpoints for GPU and memory.
As you flip up the box front cover. You will see a short descriptions of the R5770 Hawk’s features and the actual item below.
The bundle includes: VGA to DVI adapter, Afterburner and VC Driver CD, Crossfire cable, 6pin to 4pin molex converter, manuals and the voltage checkpoints connector
See the rear, crossfire & PCIE slot covers?
Below is my system configuration:
•   Processor: Intel i7 920 @ 4.0ghz (C0 Stepping)
•   Motherboard: MSI X58 Pro Motherboard
•   Mems: 3x2GB Kingston DDR3 1333mhz
•   Harddisk: WD Raptor
•   PSU: AcBel M8 670watts
•   OS & Tools: Windows 7 32bit, ATI Catalyst 9.12, MSI Afterburner 1.50, CPU-Z, GPU-Z & 3dMark06
Below was the result of all stock settings
Lastly for an overclocked Processor & Video Card

Official site http://www.futuremark.com:80/community/competitions/msilightning/

I want to install the new itunes but it says it cant find the old one what do i do?

hi, on my computer my itunes needs to be updated but it cant because it cant find the files for it what do i do?

Many thanks.
If it's saying it can't find the iTunes.msi or iTunes64.msi, we should try the following procedure.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I installed logic studio 9 but it says error when i install the jam pack content

The apple site says that logic 9 comes with six jam packs, but I only see 2 in the tab entitled "library." These are Jam Pack Voices and Jam Pack World Music and when I only put any of the jam pack Content Cd's (that come with logic studio) and click on the cd all it has on it is a text edit file. Is it a corrupted cd? I have seen other posts about it but no definite solution. any possible ideas? Thank You!

Hi
Something is not quite right here:
I have the original Studio 2 disks here, and the installer runs fine under OSX.8.3. It will install Logic Pro 9.0.0, which can then be updated by downloading the 9.1.7 or 9.1.8 updater from Apple Downloads.
On your system, the installer refuses to run, or does the install proceed, but you are unable to update Logic so that it will work on Mountain Lion?
CCT

Downloaded trial products, installed full CS4 later but still saying 'x' days left before trial expires'. Is this normal?

I downloaded the 30-day trial versions of Photoshop, DW, Flash, FW, etc onto a couple of new Mac Pro's for staff to work with while i was waiting for our full CS4 licenses to arrive. I then installed the full CS4's from the DVD's onto the machines no problem, serials accepted fine - all good. But whenever we open up an application, we still get up the screen at the beginning saying we're using the trial version and that we have (now) 2 days left before it expires. I've tried entering the full license serial number into the option below this notice but it won't accept it. I'm now very concerned that in 2 days time the staff won't have CS4 to work with even though it's been installed.
Will it simply recognise the full CS4 version once the trial runs out? Should i have uninstalled the trial first or entered my new full license serial into the trial without installing from the DVD's? Have i done something wrong?
Any views/help/advice/knowledge is much appreciated.

Did you uninstall the trials?
I would uninstall the software then run the CS4cleanscript.
then reinstall.

Downloaded new FF4.0. Rebooted. Now have disabled yahoo toolbar. went to Ff site and tried to install suggested Yahoo toolbar but FF says I still have FF2.0.0.2. Please help. I need my yahoo TB back!

Upgrading to FF4.0, and manually rebooting again.
Window opened and Yahoo toolbar was mostly gone, except for white search box and its search button. Both are currently disabled. All other buttons that were with my Yahoo TB are gone.
Went to FF website using google search.
Looked for Yahoo toolbar that worked with FF4. Followed the steps but FF continues to say: "You are currently using Firefox 2.0.0.20". This happened in two places. It is not recognizing that I have upgraded to FF4. How do i fix this?? Thanks so much!

'''bold text'''I followed the instructions:
1.Type about:config into the location bar and press enter .
2.Accept the warning message that appears, you will be taken to a list of preferences .
3.Locate the preference general.useragent.override, right-click on it and choose
I could not find "general.useragent.override," in the directory.
The only listings under general.useragent. are general.useragent.compatMode.firefox, general.useragent.extra.asktb,
general.useragent.extra.microsoftdotnet and general.useragent.locale.
There is no "general.useragent.override." I have FF 4.0 version.

I restored my macbook, now I want to install Mac Lion again but it says to me that Mac isn't installed on MY Apple account, probably because I bought it from someone else

PLEASE HELP ME I CAN'T GO ON MY MACBOOK ANYMORE

How old is the Air? If the original OS was not Lion and it had been upgraded to Lion by the previous owner, you will not be able to install Lion until you purchase it yourself. The Lion upgrade is non-transferable and the previous owner should have restored your system to its original OS. If the original OS was Snow Leopard or earlier, you can contact Apple to have installation media shipped to you. MacBook Airs shipped with a flash drive containing the restoration OS. Did the previous owner give you the box as well? The flash drive is tiny and you may have missed it.

I have a serial number to install acrobat XI pro but it says this is invalid, i have checked this number and it is correct, what am i doing wrong

Being a student i was eligible for education edition, i have received a serial number from Adobe but when entered into the trial version, it is not valid? what am i doing wrong?

Did you get the S/N or the number to provide in order to get access to the S/N. They have changed some of the activation processes and it includes a step of having a number to get the other number. Sounds kind of weird, but that may be what you are seeing. I think they have implemented that process, but am not sure. I don't due activation on a regular basis and so am not aware of the implementation of a change that has been mentioned.

I bought a one year of CC (Student and teacher) and installed Photoshop CC (2014) but it says that this version is only a trial. I thought the newest Photoshop is included in the Student and Teacher version?

Please help me with this problem.

I am having this problem too, I have installed photoshop (and dreamweaver) however upon opening it asked me to sign in which i do, it then asks me to either start the 30 day trial or 'license this software' and upon clicking to license the software it asks for a serial number. I have looked around adobes help pages and it states that memberships or subscriptions do not require one!
Serial number, Redemption, and Product codes | Student & Teacher Editions

I currently have itunes11.0 Trying to install the upgrade to 11.1 (windows Vista) but systems says there is an error. I keep trying but get the same message

I am trying to install itunes 11.1 but system says error occured run installer again...when I do I get the same thing again. Help

See if this helps you. <br />
https://support.mozilla.com/en-US/kb/unable+to+install+add-ons#Download_Error_228

I have flash player version 12.0.0.70 installed but youtube says it is not current

I have adobe flash player 12.0.0.70 installed on my mac but youtube says it is not current

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 6. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 3
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 4
Open this folder as in Step 3:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 5
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 6
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 7
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
Step 8
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.

Help! R5770 Hawk - No display from wake-up

No display from wake-up (Fans, lights are on, HDD spinning...). Latest ATI CCC 11.3 installed. To get displaying on monitor, I have to long press power button to shutdown (?), then press power button to restart (?). However, Win 7 stated "Resuming windows" ...
Any idea? Thanks for your helps.
My system:
MB: ASUS P8P67 PRO (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
CPU: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor
RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
GPU: MSI R5770 Hawk Radeon HD 5770 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
PSU: CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Display: HP 2511x using HP supplied DVI cable.
OS: Win 7 Pro 64

Ask Asus support, this is mainboard related

Installed MSI R5770 Hawk but PC says: HD 3200

Similar Messages

Maybe you are looking for