Installed my new Airport extreme and try to link it to airport express but the wifi still very slow

I installed my new Airport extreme today and try to link it to my airport express to expend my wifi coverage to my second floor but the wifi si very slow on second florr not better then without express? what can I do??

Hi Francois
Any wired connection or WiFi network extension (using your AirPort Express) with your second floor will make your network signal stronger but not necessarly faster. If your WiFi signal is so poor that internet connection keeps dropping, it will make a speed difference. Otherwise the only difference you'll notice is that the range of the wireless network has increased.
You say "wifi is very slow on the second floor". Do you mean that the internet is slow? Is it very fast on the first floor?
Try checking your internet connection speed on a laptop on each floor:
speedtest.net
and press "begin test recommended server".
The download speed should approximate your ISP contracted speed. Upload speed will be a fraction of this. Wifi will be slower but unless you have a super-fast internet connection, you probably shouldn't notice it.
Peter

Similar Messages

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
Post back on your results.

My wireless iBookG4 sees my new Airport Express, but my PowerMac G5 won't!

My wireless iBookG4 sees my new Airport Express, but my PowerMac G5 won't!
I find this really strange. I have a cable modem coming in. There is an Airport Express hooked up to it. I use this to allow free movement about the house for my iBook, bhile my PowerMac g5 stays wired via ethernet.
Now I have purchased a second Airport Express for the living room, hooked up to BOSE speakers. The iBook sees the new Airport Express and can brpadcast iTues to it, no problem. The problem IS, I can't get the PowerMac to see the new Airport Express AT ALL--- it only sees the original one (the one that has the ethernet connected to it) PLUS--- the new Airport Express LCD flashes amber, not green... what is going on???

The new Express is not really on your network but is able to communicate with the laptop using Bonjour. Here's Apple's explanation for the flashing amber:
Startup is complete, but AirPort Express didn't get an IP connection. Depending on your setup, it may mean AirPort Express is out of network range, unplugged from Ethernet, lacks a path to the Internet (or local router), or that there's an issue with your Internet service provider.
Does your PowerMac G5 have an Airport card? If it does then it isn't associated with the new Airport. Both should be listed under the Airport menu but only one has a checkmark. If it doesn't have a card it won't be able to see the new Airport until you configure the new Airport as an extension of the first wireless network, called WDS or Wireless Distribution System.
Start here for more info:
http://www.apple.com/support/airport/

Will there be a new airport express like the new airport base station?

Will the airport express be upgradable to the "N" standard? (I doubt it.)
If you want to use your airport express with the new Base stations wouldn't it screw up the "Pre-N" mode? (I don't doubt it)
Is apple saying that one wouldn't need an airport express to extend the reach of the new base station because the new "Pre-N" modes have so much more range? (I think so).
Does this mean that apple will be making a new version of the Airport express with A,B, G and "Pre-N" ? How cool would that be? I want one of those!!
IMHO the airport express is the coolest Network device available for use with either Macs or WINdoz machines. It is just plain cool. It seems to me that the new Base station has little or no place in it's heart for it's older little brother.
Yaesumofo

As you know from reading the "Help & Terms of Use" for this discussion area, we are Mac users like yourself and have no special knowledge of Apple's future plans or activities.
Furthermore in the "Help & Terms of Use" it states that speculation on future Apple products, plans, or activities is forbidden in this discussion area.

I can stream from ios to new airport express but not from windows 7 or powermac G5

I have new airport express and older apple tv on my network. Both are connected and found by all devices - Windows 7 laptop, Powermac G5 and all ios devices. I can stream music via airplay to both airport express and apple tv from ios devices (one at a time of course). I can stream from itunes to Apple TV but cannot connect to the airport express! It shows up and I get the dredded error: An error occured while trying to connect...
I tried some of the many ipv6 suggestions that I've seen here but nothing is working.
Anyone have the setup? Is this an airport express setup issue? Please help!!!

OK, I'm tipping my hat to Apple's (new) online experts. Great job.
They might be able to solve YOUR problem, too. Find them at:
http://www.apple.com/support/expert/

My system can not connect with the Airport Express while the signal is very good?

Neither my phone nor my desktop (windows 7) can not make a connection with the Airport Express. The signal keeps flashing amber.
Several specialists have checked but can not solve this problem. Any ideas?

I am in exactly the same boat...

I installed a new airport express and made it part of my existing home network... now the PCs can't access internet through the airport extreme or the cisco access points

Everything works perfect with Macs, iPhone, iPads but I have 2 pcs that now can't access internet. The PCs connect to the airport and my other access points but no internet- The PCs sent an error of DNS

Yes, as we already said, it will do all of this if you have a good wireless signal reaching the bedroom.
Remember that an extender or repeater or whatever you want to call it can only extend the quality of signal that it receives.
The Ethernet signal that the Express delivers will only be as good as the quality of the wireless connection between the AirPort Extreme and AirPort Express.
If you have doubts, make sure that you understand the store's return policy before you buy.

How do I install a new airport express and link a second airport express to extend the network of the first airport express?

I currently have a linksys wireless router attached to the Internet. I have an A1264 Airport Express connected by Ethernet to the linksys router. I have two network names, one for each wireless network.
I purchased a new A1392 Airport Express to replace the linksys router and join to the A1264 Airport Express, and I want to have one network name as a result.
How do I do this? I realize that I have to reconfigure the A1264 device so that it is an extension of the A1392 device.

You have a fairly complicated set up, so I suggest that it would make sense to tackle things in stages, testing each stage as you go, before proceding to the next stage.
Stage 1 would be setting up the A1392 first to the cable modem, and then making sure that everything is working correctly on the A1392 Express
Stage 2 would be adding the Netgear switch and testing each port with a laptop connected via Ethernet to make sure that everything is operational on the switch
Stage 3 would be connecting the A1264 Express and testing to make sure that it is extending the network correctly
Stage 4 would be adding other Ethernet devices to the Netgear switch and testing each one at a time before adding the next device. There is some question about whether an iOS device can print to an Ethernet connected printer....even if the printer is AirPrint compatible. You may need to connect the HP using wireless...not Ethernet....to gain full AirPrint functionality, or use another application that will allow printing like Printopia or Print Central using the Ethernet connection on the HP.
Stage 5 would be adding the printer to the A1264 AirPort Express.
You do not mention how the printer will connect to the A1264 Express, but I assume that it will be USB from your description. Most printers will work, but you really will not know if your printer will work until you try.
Remember that only printing will be supported at the USB port of the Express. If you have an all-in-one type device, scan, maintenance, and other advanced features will not be operational whent the device is connected to the AirPort Express.
If you want to print from an iOS device like an iPad or iPhone, plan to add additonal software like Printopia or Print Central to possibly allow this function. There are no guarantees here as far as the iOS devices.

Why won't my eMc boot when I install a new Airport Express Card?

I just tried to install an Airport Express Card into my eMac. After each time I reseated and then turned on the power, my eMac would not boot. It boots fine without the card, any ideas or suggestions?

There's a possibility that the card id defective and should be exchanged, but a stronger possibility that the Airport Extreme card (Airport Express is a different, external device) isn't actually seated quite all the way. Many posters in the eMac forums have noted that it takes a suprising amount of force to fully seat the card and to get it to move the last millimeter or whatever into the slot. You need to press the card to just short of where the eMac chassis starts moving away from you on your desk or table.

I have an old airport express, but the software on my computer does not accept it. I need to downgrade the software, but the older software will not install.

I have a old G4, I want to give to my son. It does not have a wireless card and because his room is on the second floor it is impossible to connect with a wire.
I wish to add an airport express to my airport extreme network and connect the computer and the airport express together with a cable. Is this possible?
second question:
software does not install.
I do have a network with a airport extreme and want to add the old airport express to it. I want to do this with airport software, however the software tells me the airport express is to old and i need to reinstall older software 5.6 to be precise. However installing fails, so I thought i just remove the airport software, but osx does not allow me to do that.

i managed to install the older airport utility and am trying to set up a connection with an existing network, but airport utility cannot find the airport extreme AFTER it starts up again. I then went and again restored it to its factory settings and did the whole procedure again with airport utility, but again after utility tells the airport express to restart it does not come back.

Hi,I have made a new Apple ID and logged in on my phone, on settings, but the app store is still using my old one. How do I get rid of the old ID and replace it with the new one?

Hi, I have made a new Apple ID and logged in on my phone, settings > iTunes & app stores, but the app store is still using my old Apple ID. How do I get rid of the old ID and replace it with the new one?

HAYDONISRAD wrote:
... Maybe I'll stick with hers for now :-)
OR...
You could use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?

New AirPort Express, but only 1 device can be connected at a time

I recently switched out a Linksys router for an AirPort Express, and now I am only able to connect 1 of my devices (MacBook, iPad, iPod Touch, Tivo) to the internet at any given time. I'm not sure if this is an AirPort or ISP (Earthlink DSL) issue, but with the Linksys, I was always able to have multiple devices on my home network at once.
With each of my Apple devices, I have to open Safari and obtain a connection by entering my DSL password. Specifically, the Earthlink ASDL Modem page says, "The Internet connection is currently in use by another computer (lists the IP address). Enter your DSL Account logon password to switch the Internet connection to this computer."
After I do this, Earthlink gives me the option of 'Releasing the Connection' so other computers can access the internet without entering the logon password...whether I do or don't, it doesn't change the fact only 1 of my devices can be online at once.
Did I configure my AirPort incorrectly or is there a setting that I need to change to fix this issue? Thanks!

Welcome to the discussions, kaytoem!
This sounds like you may have the AirPort Express set up in "bridge mode", which would only allow one device to connect at time.
Open AirPort Utility - Click Manual Setup
Click the Internet icon
Look for the Connection Sharing setting
This should be set to Share a public IP address
Update to save any changes
Does that help?

My itunes are only playing on two of my three aiport express. Why? The green light is on Airport Express. The WiFi is connecte to my commuter. I am hearing music in the other rooms...

My itunes are only playing out of two of my three airport express. Why

Ok, it sounds like what your are trying to do, up-and-above your current configuration, is to both extend your Internet connectivity to additional wireless computers AND stream iTunes to a stereo...correct?
If so, your AirPort Express (AX) will need to operate as either a Remote or Relay Base Station in Apple's Wireless Distribution System (WDS) mode. (ref: http://docs.info.apple.com/article.html?artnum=107454) In order for this to work, you would have to use either another AX or an AirPort Extreme Base Station (AEBS). However, there are some other 3rd-party routers (like Linksys) that may work as well. (ref: http://discussions.apple.com/thread.jspa?threadID=121820)
What is the make/model of your current wireless router...and does this connect directly to your ISP's DSL/Cable modem?

Airport Express extending Base Station network very slow.

Hi,
I have an Airport Extreme Base Station and an Express, both of which are 802.11N. Currently I have my express connected and extending the network hosted by the Base Station but when I am in a location where I use the Airport Express rather than the Base Station it is extremely slow. If I am on a call on Skype for example the calls drop constantly or I have latencies over 2000 if I am playing a game. But Once I am in range of the Base Station my wi-fi is great. Anybody have any ideas as to why?

What are the steps to extend the network using the Airport Exprss with a Linksys router? I have the Airport Express working with my network (a Linksys WRT54G) but have never attempted to use it to extend the network; instead, it just works for Airtunes currently.
In addition, I can't seem to get Airport Express Assistant to work on my Macbook Pro. It says there's an error when it tries to connect to my Airport card, which is odd, since it works fine.
Any ideas?
Macbook Pro Mac OS X (10.4.7)

Just bought a new MacBook Air and tried to hook up my iPhone 5, but the computer won't recognize it. Please help!

I just bought a new MacBook Air, updated my iTunes on both my Air and my iPhone 5, but my Air won't recognize my iPhone or if it does, it will only show up for a second and then it gets disconnected again. I know it's not the plug because my phone charges fine from the wall...

Hi nryan15,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Best of luck,
Mario

Installed my new Airport extreme and try to link it to airport express but the wifi still very slow

Similar Messages

Maybe you are looking for