Installed new Audigy 2 ZS and tons of hiss

I used to have onboard AC97 sound running from my computer to my Adcom amp to my speakers. Prior to installing the card I disabled the onboard audio in bios and made sure everything for it was removed in Windows. All was fine until I installed the Audigy 2 ZS. On any setting (everything muted, turned down and so on) there is a loud hiss. It doesn't matter if I mute everything or not it is still there.
System is:
Abit IC7 Motherboard
Windows XP with SP2
Radeon 6800 GT OCMessage Edited by ncrosanct on -05-2004 03:46 AM

Ncrosanct,
If you have another system available to test the card in you might want to try the card in another system to see if the hiss continues on the other system. If it does, or if you don't have another system to test with you will want to contact Technical Support to arrange a repair for the card. Their contact information is found on this page:
http://us.creative.com/support/custsup
If the hiss goes away on the other system make sure that you have tried the card in all of the available PCI slots and that the onboard card is completely disabled in the BIOS (some systems have different sections of the card listed in as many as three different sections).
Jeremy

Similar Messages

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error.

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error stating please insert black ink cartridge.
Please Help

Make sure it is a genuine HP cartridge. Take it out and clean the contact on the cartridge and in the printer. Try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Installed new Premier Elements 12 and dymamiclinkmanager has stopped working

The Sw does not start at all I get several error messages:
Installed new Premier Elements 12 and dymamiclinkmanager has stopped working
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    dynamiclinkmanager.exe
Application Version:    6.0.0.0
Application Timestamp:    523cc6d3
Fault Module Name:    MSVCR100.dll
Fault Module Version:    10.0.40219.1
Fault Module Timestamp:    4d5f0c22
Exception Code:    40000015
Exception Offset:    0008d6fd
OS Version:    6.3.9600.2.0.0.256.48
Locale ID:    1035
and after those a Message:
Adobe Premier Elements 12 has stopped working
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe Premiere Elements.exe
Application Version:    12.0.0.0
Application Timestamp:    523cd4d5
Fault Module Name:    dvamarshal.dll
Fault Module Version:    11.0.0.0
Fault Module Timestamp:    523cc62d
Exception Code:    c0000005
Exception Offset:    0000000000034961
OS Version:    6.3.9600.2.0.0.256.48
Locale ID:    1035
So did I purchase piece of crap, or what should I do to get the SW working?
Br
-H

First, note that this is a user-to-user forum. If you want to contact Adobe, you'll need to call or write them on their main site.
That said, as the note says at the top of the forum, you're going to have to provide us a lot more information if you want us to help you. "Stopped working" doesn't tell us much. Does this mean that it was working in the past but then stopped? What stopped? What did it do that it's not doing now? What were you doing when it stopped? Was it when you were adding video to your project, for instance?
What operating system are you using? If Windows, have you manually gone to Windows Update and made sure you've got the non-critical updates, which don't download automatically to your system? Have you ensured you have the latest version of Quicktime, per the program's requirements?
How fast is your processor, how much RAM do you have and how much free, clean, defragmented space is on your hard drive?
What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from your camcorder to your Premiere Elements project?

I install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen

i have install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen.
need help

First boot into recovery and select Disk Utility>First Aid and repair the disk.
If there is no improvement, perform a Safe Boot:
http://support.apple.com/kb/ht1
If there is an improvement, then third party applications are probably the cause of the problem.
Ciao.

Scared to install new Audigy 2 Va

Hello,
I just bought a new retail Audigy 2 Value as an upgrade to the onboard audio on my 3 week old HP Media Center PC. After browsing the forum and hearing all the problems people have had I am afraid to install the card. I share the PC with my wife who uses it daily for her work, and who has previously been unamused by my self-inflicted computer problems. I have already upped the RAM and upgraded the graphics card but am almost ready to return the card unused. Anybody got any good news regarding Creative hardware and/or drivers?
If I decide to give it a try I presume I can disable my onboard audio by using Device Manager under Hardware and leave any existing sound drivers on my system, such that I may easily go back to my current sound setup. Yes or no?
Thanks for any replies.

just put the card in a free pci slot, and not shared with other pci slot.(so near the card we prefer a empty pci slot. Also keep it away from your agp card(not directly near it, agp shares with first 2 pci slots) a video is audio and video at the same time, that's why
if you've installed the card, start the computer up (don't change bios , because if your computer has irq sharing onboard(normally they have) then you can use more then one or two soundcards, it sholdn't have to give any conflicts.(it's even handy to have more then one soundcard).
If windows is starting and also gives messages about hardware found , do cancel it all. Don't let windows install it , this because i prefer a install direct from cd.(otherwise you'll get windrivers , and then when running cd, then it updates again to creative drivers(who're more up to date).
So cancel windows found new hardware , and just run the setup (installation) from Creative CD..
after that, check if windows is updated , after that go do a creative webupdate (you can find it on this site,unfortunately it only works under InternetExplorer)
just don't be afraid of your compu dude , it should be viseversa, LOL
(maybe first backup your documents(of your wife) on Cd-R(W) (or DVD-R(W)) just in case)
oh Jason: I'm happy with my Audigy2zs, sounds so crystal clear on 2xstereoamps & 4x discospeakers (quaddrosetup)now i'm a DVD-A collector but now i want to buy a A2zs dri'vebay...in a Store @ NL, and Linux support (same features as Windows)!
...but the problem is that most users already experience the answer....NOMessage Edited by www_96KHz_tk on 02-5-2005 06:22 AM

Installed new iTunes 8.1 and no library

I installed the new version of itunes and now my whole itunes library is gone...
I had some music under MY music and I put most of it back. But when I tried to sync my ipod it said my ipod is already synced to another library. But it isn't. Same computer...
???

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

Why since installing newer firmware the camera and video are missing features and pictures suck?

Since installing newer firmware you can no longer set the resolution for and pictures suck. Also can not zoom in on video. How can I go backwards with the firware?

Welcme to the Supprt Frums!
Check and see what OS you have. Go to your STATUS icon > then ABOUT > on the third line down it should tell you 4.x.x.xx I think you will need the 4.5 OS . (operating system)
Also here is the ATT link to help you with upgrading if you need to.
https://www.blackberry.com/Downloads/entry.do?code=577BCC914F9E55D5E4E4F82F9F00E7D4
Nurse-Berry
Follow NurseBerry08 on Twitter

How to install new version of safari and delete old one

I am not sure what pieces of info are needed to help me so please be patient. Basically my hotmail is no longer working, telling me I need to download a new version of safari so I downloaded safari 3.12 however it is still not working on hotmail. I am not sure how to apply/install the new version of safari and get rid of the old version. If anyone knows how to help me...it is much appreciated...be specific as I seem to be mac-******** at times
Thanks.

Hello ec:
Welcome to Apple discussions.
As far as I know, you cannot download Safari and reinstall it successfully. Install Safari from your software install DVD and then run software update.
I do not use Hotmail, so I have no information about that platform.
Barry

I installed new version of itunes and I'm getting error message 0xe8000084&oxe800002dwhen trying to sync iphone5 what can I do?

I just installed new version of iTunes when I go to sync iPhone 5 keep getting error oxe8000084&oxe800002d is there a solution to this?

Try this for Windows 7 (64 bit),
Close iTunes - Go to Task Manager – Click the “Services” tab - select “Apple Mobile Device” - left click and choose “Stop Service” - wait a few seconds - left click and choose “Start Service” - wait a few seconds - open iTunes - connect your iDevice.
Did it work?

How to use Recovery DVD to install new copy of OS and CUSTOM PARTITIONS?

Hi
I have problem with start appropriate recovery function from created Thoshiba Recovery DVD.
I burn two DVD using Toshiba Media Recovery Creator witch was preinstalled on my computer. Now I want to use it to install new copy of Windows 7 OS on my laptop. BUT I would not want to clear entire HDD. I want to format only C: partition, and leave data on my D: partition. Also I want to define C: partition size.
When I insert DVD and boot form it, some app start but display info that all partition will be removed. I can not choose another option.
How can I do it?

Hello
Check please http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm document.
I think everything must be explained there. If you have more questions please let us know.

Attempted to install new version of itunes and now getting errors occurred while install updates. runtime error program: c:\program files (x86) an application has made an attempt to load the c runtime library incorrectly. please contact the applications

attempted to install newest version of itunes and now get 'runtime error' program: c:\program files (x86) r6034

Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh

Can't install newer versions of iTunes and can't un-install current version

HELP!
That's a good start to my first post I think lol... hey at least I'm still laughing, even though I feel like crying!
I am having (probably similar to many from what I can see from this forum and also from google search) problems updating my iTunes to the latets version.
Whenever I start to install the new version I get a message pop up saying that iTunes64.msi can't be located, even though it does exist in the default filepath it throws up anyway.
After doing some Google searches I saw that a way around this might be to use the Windows Unintaller Utility, however, I have yet to actually find this utility, particularly as Microsoft now appear to have removed all traces of it from their site as it seemd to be causing other issues.
Next I found an article on Apple that said that if I am having the problems that I have stated above then I should unistall various apple software items in a particular order with iTunes being the first on the list.
This is where I am now stuck! I can't un-install iTunes from Control Panel as it says that it isn't installed! Of course it is installed, however, it would appear that something somewhere is corrupt and it doesn't actually think it is really installed (I think my PC is suffering a sual personality... maybe that's what dual core really means lol).
The corrupt nature of my iTunes installation would also seem to be borne out by the fact that the icon in the list of installed programs for iTunes is not the normal icon but a blank (unrecognised) icon.
I am now clean out of ideas as I can't do any of the "normal" things to remove and re-install iTunes and so I could really use some help/advice.

Hi Katrina
Thanks for confirming my suspicions on the use of (or rather not) of the utility on Windows 7.
I also tried as you suggested to run the iTune64.msi file from it's location... it almost looked like it was working but then came up with the usual message saying it couldn't find the .msi file.
I even tried copying the file to another location but it still hit the usual error
I have a horrible suspicion that I am not going to get this sorted short of doing a complete re-install of my OS (which I don't fancy doing, particularly as at least iTunes is functioning anyway).
I am already planning to move away from Windows PCs and move onto a Mac in the very near future, so hopefully in the intervening time Apple won't release a critical udate to iTunes that means I need to update to continue certain functionality.
Roll on Mac-Day for methinks
Of course if anyone else can think of any solutions for me to try in the meantime then I would be more than grateful to hear from them and to give it a whirl.

Install new OS into desktop and laptop?

I haven't opened the package yet, but I bought Tiger last night at an Apple store and am hoping to install it on my G5 iMac and my Powerbook laptop (I'm traveling soon).
Do I have to go back to the store and get a Family Pack for an additional $70? I wasn't able to upload the new system and had to buy a new one, but his hurts.

A single-user license only allows you to legally install on one CPU at a time. Installing on more than one CPU at a time is a violation of the license agreement.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Downloaded new itunes version, backed up my ipad onto it. installed new 5.0 ios and my music on itunes seems to be overriden with my burnt music on my pc. i cannot find my music purchased on ipad in itunes now

I downloaded the new itunes version on my pc, backed up my ipad to itunes, then installed ios 5.0. Everything went well except my music i purchased on my ipad is no longer showing in itunes, the music that was on my pc was transferred to it (which i do not want on my ipad). Any suggestions on what happened to my music purchased on my ipad? I am sure I backed up up prior to install. Thanks for any help.

Open iTunes, go to the iTunes Store, and then go to Purchased on the right hand side under Music Quick Links.
You can re-download all the songs, apps, or books you have previously purchased.
I'm not sure if this is a requirement, but just in case, make sure you download the latest version of iTunes (v10.3) too.

Tried to install new version of itunes and getting r6034 error code

This morning I tried to download and install iTunes Version 11.1.4. I'm getting a R6034 error code RUNTIME ERROR when I go to the "install" phase. I've already de-installed my old version so I know I've not got any files kicking around. I even went as far as purchsing PC CLEANER PRO to try to fix the R6034 error code and it's not solving it. I have the new version sitting in download mode but I'm not able to install it. I get part way through the install and the error code window pops up again. Any suggestions?

The third party cleaner may have been a bad move... It might make the following harder.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Installed new Audigy 2 ZS and tons of hiss

Similar Messages

Maybe you are looking for