Installed new bios and now computer won't boot

I just installed the new bios for my HP Pavilion dv6704nr Entertainment Notebook PC laptop off the hp website and now my computer won't boot. I tried removing all power (including the 3 volt battery) and it still won't turn on. I Then tried the windows + B keys at boot and still nothing. I have windows7 64 bit OS and installed the vista 64 bit bios (the only 64 bit bios they had). Any help would be greatly appreciated.
Thanks

try runnng system restore from recovery manager, if the OS is changed then run recovery
***Click on “Kudos” STAR to say thanks!***

Similar Messages

Installed os X Mountain Lion and now computer won't boot (first had keyboard issues-reverse caps)

Hi all,
I just updated my macbook air to osX mountain lion and now it will not boot at all.. At first I was having issues with the keyboard and keys typying weird characters.. and the caps lock was stuck on reverse. Now I have nothing.. Can someone help.

What happens when you try to boot?

Please Help: Installed new CPU (i7) now system won't boot.

I'm hoping someone can help.
I have an MSI H55M-P31 (MS-7636) motherboard, and I updated the BIOS to 1.A0.
But when I installed the new CPU, I get 3 Long beeps, and then my computer won't boot.
I have 4Gigs of Memory
Current CPU: (working 100%)
3.07 gigahertz Intel Core i3 540
64 kilobyte primary memory cache
256 kilobyte secondary memory cache
4096 kilobyte tertiary memory cache
64-bit ready
Multi-core (2 total)
Hyper-threaded (4 total)
500watt PSU
Please Help, I don't know what to do now. (did check CPU compatibility on website - i7870)

What PSU is that and what are the ratings of that PSU ? See the label on the side.
Are you trying to use the onboard graphics?
That CPU does not have integrated graphics. http://ark.intel.com/products/41315

I downloaded a new book and now it won't let me copy it to my nook.

Our computer crashed and we had to go back to factory settings to get it back on. I had to re-install Adobe Digital Editions to borrow books from my library. I downloaded a new book and now it won't let me copy it to my nook. I keep getting "not authorized to copy".

You need to add a valid payment method to the account. An iTunes gift card can be added.

Just downloaded new iTunes, and now it won't open, Os10.6.8

Just downloaded new iTunes, and now it won't open, Os10.6.8

You did a d/l of the iTunes .dmg - did you install by opening the .dmg and following the dialogs?
MJ

HT4759 I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch.

Reloaded Photoshop CS5 (New Machine) and now it won't open, geta message "Could not open scratch file because disk is not available", so pS won't go any farther.

reloaded Photoshop CS5 (New Machine) and now it won't open, get a message "Could not open scratch file because disk is not available", so pS won't go any farther.

If prefs are the same as Settings on a MAC, OK, it would have been more
clear to me if you had said Settings since I didn't see anything related to
prefs. On a PC, I know what you mean, On a MAC, wasn't sure.
In a message dated 4/9/2015 9:13:48 A.M. Eastern Daylight Time,
[email protected] writes:
reloaded Photoshop CS5 (New Machine) and now it won't open, geta message
"Could not open scratch file because disk is not available", so pS won't go
any farther.
created by c.pfaffenbichler
(https://forums.adobe.com/people/c.pfaffenbichler) in Photoshop for Beginners - View the full discussion
(https://forums.adobe.com/message/7421714#7421714)

I have just downloaded OSX Yosemite and attempted to use photoshop CS5 but was prompted to install JavaForOSX2014-001dmg and now photoshop won't open saying ' an unexpected and unrecoverable problem has occurred.photoshop will now exit". ??

I have just downloaded OSX Yosemite and attempted to use photoshop CS5 but was prompted to install JavaForOSX2014-001dmg and now photoshop won't open saying ' an unexpected and unrecoverable problem has occurred.photoshop will now exit". ??
Can I revert to the older operating system?
I am not familiar with tech speak, so plain english please. Thank you in advance.

Do a backup, preferably 2.
Revert to a Previous OS X
Revert Yosemite to Mavericks

I installed New version and now I cant see videos but I can still hear them.

I installed New Version and Now I cant see videos but I can still hear them. I have Tried everything to fix the Problem. HELP PLEASE!!!!

Hello
I have a little bit different problem but its close to this.
I have installed the .10 version and now i cant see any Video on youtube. And it does not play any sound. It not opens anything with flash player.
I deinstalled and rebootet the player. I installed the new version again. 10 times....
I also tried an old version. The 2 older versions. No change -.- its really annoying.
can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
i cant see that animation... but in the help is NOWHERE written what u should do if you cant see that....

I bought Cool Edit Pro v. 2 many yrs ago. loaded onto new PC and now it won't work

It now thinks it's a "trial version" and won't let me use it. It's NOT A TRIAL VER, I PAID FOR IT. The Adobe support guys don't want to help, I need a work around

I loaded it using the original CD and license number. My old PC had Windows XP but my new PC has Windows 7. It worked for a while, but then up pops the "trial version" stuff saying I used up my 12 free hours. It wasn't a trial version, I bought it years ago and have been using it all along
Date: Mon, 7 Apr 2014 15:24:39 -0700
From: [email protected]
To: [email protected]
Subject: I bought Cool Edit Pro v. 2 many yrs ago. loaded onto new PC and now it won't work
    Re: I bought Cool Edit Pro v. 2 many yrs ago. loaded onto new PC and now it won't work
    created by ryclark in Audition CS5.5, CS6 & CC - View the full discussion
Where did you reload it from? Do you still have the original CD and serial number? Maybe it isn't compatible with your new PC so we need a bit more info to see if it is compatible.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6279497#6279497
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6279497#6279497
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6279497#6279497. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Audition CS5.5, CS6 & CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My hard drive failed, has been replaced, and now it won't boot to CD.

My hard drive failed, has been replaced, and now it won't boot to CD to install the OS package. It would boot for a while, get through the first cd of install and would stop randomly in the next install. I found out that the installation disk was cracked so I went out and purchased the Mac Box Set which includes Mac OS X Snow Leopard, iLife '09 and iWork '09 under advisement from an associate at the local apple store. Now, I try installing this new OS disk and all I get is the apple logo without a spinning wheel for about 10 minutes and the computer restarts and does it again. I have tried booting from disk, holding c while starting up, and in safemode, holding shift while booting. Please help save my poor poor macbook!!!

These errors look like corrupt or missing files that leopard requires. It sound like you need to start from scratch: format your drive, reload Leopard. I realize that this is probably what you are trying to do.
If you cannot boot from install DVD and cannot successfully get into Safemode or Single usermode (due to a corrupt or incomplete install) then you will need another computer to assist you.
If you can get it into Target Disk Mode and have another Mac you could plug it into that Mac and reformat it.
If it will not go into TDM then you may need to take it out and put it into an external enclosure to plug into another Mac to format it.

I installed IOS 7 and now it won't accept my password. How do i fix it?

I finally got around to installing IOS 7 and now my phone won't accept the 4 digit passcode. I didn't think about disabling that feature before the upgrade. Never had a problem before. And yes, I'm sure I'm using the right code. I use it many times per day! I tried plugging into my computer and itunes but since it isn't unlcocked it won't recognize it. Likewise with iCloud. I tried find my phone and it comes up offline. This is a last ditch effort. I can't even phone a friend! Any workaround?

The security is tighter in iOS7,
When you install it for the first time it asks you a few questions to configure these new settings, and I'm wondering that you may be confusing the new authorization scheme for your old password.
When first running iOS7 after the upgrade it will ask you for (not your iPhone password) but your iCloud/Apple ID password.
Read the questions carefully and make sure that you're not confusing the two as prompted. You may not be, but this is my initial thoughts, as the install does not change any existing passwords but does link the hardware to iCloud to further prevent theft.
-Alan

Mountain Lion update, and now computer won't start up?

Writing this for a friend, as his computer is inop at the moment. Hence this message.
He has a new 27" iMac. He upgraded to Mountain Lion a few weeks ago, and then had intermittent problems with apps unexpectantly shutting down.
Now he did a ML update this morning, and his computer won't start up. It gets to the point of the Apple logo coming up, a progress bar, and then the spinning wheel, but then shuts itself down right afterwards.
A safe boot yields the exact same result.
Any thoughts out there on what he could try to get it up and running again?
Thanks much for any and all help.

Thank you for the fast response.
He was able to get into Disk Utility with the Command and R keys, but when he tried verifying the disk, in red it said 'Invalid Node Structure, volume could not be verified completely'.
He went ahead and verified it anyway, then proceeded to repair it. Howver, it stopped repairing, said it cannot repair, and that he should back up files and reformat the disk.
How can he back up his files? He cannot see a way to do it. Is there anything else he can do besides having to reformat the disk?
This is his first Mac (after much prompting from me to go Mac), and he's afraid he's now lost everything on there.

I downloaded the new iTunes and now it won't connect to the Store

I downloaded the new iTunes and now it wont' connect to the store. I tried to do a repair and now I've just re-downloaded iTunes. Still no luck

Hello evelyn35,
The following article can help restore iTunes' connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Replaced router and now XP won't boot

Okay, hope this makes sense. Had a Linksys (older model) and removed to place a new router in with more power. Got setup and didn't remove old wireless connections beforehand and now, I can't boot up Windows XP unless in Safe Mode. Not sure if I have to remove the Networkname or what, but its late and I've probably been looking at this too long. After spending time with ISP trying to get them to reboot modem so connection would work, something got hosed up along the way.
Any help on trying to fix would be greatly appreciated!

Hi… I don’t this has anything to do with Network Name or old Wireless Network connection. Might be some of the system files are missing or gone corrupt. I would suggest you boot the system in safe mode and restore the system to a restore point dated 15 days back. This will help you to boot the system in normal mode.

Installed new bios and now computer won't boot

Similar Messages

Maybe you are looking for