Installed New Epson Drivers; Now No Duplex

I installed, via Software Update, the newest Apple drivers for my Epson RX680 printer. Now I find I can't print on both sides of the paper. It says no duplexer is available.
Anyone else seeing this?

Well, I think I've answered my own question here.
On my system, anyway, I was having trouble with the Auto Duplex setting not being available in all applications.
It turns out the problem was "cured" by going to the Presets drop down in the Print dialog box. I saw Standard was selected there, so I selected it again in the drop down. Voila!!! Now the Auto Duplex is available, whereas before it was grayed out.
I'm not even sure why I stumbled onto this, as I NEVER have a need for the Presets "feature", and have never had anything in them.
Anyway...all my printer functions are working now. (The card reader in this printer died several months ago, but I can live without it).

Similar Messages

Tip: New Epson drivers available at sg site

New Epson drivers are available at the Singapore site. I tried the driver for my Stylus Pro 3850 and I was able to add the printer to my printer list using Bonjour rather than the specific IP method previously necessary with Leopard. The driver will support all variants of the 3800/3850.
The U.S. site currently only provides public beta drivers for Leopard. I'm not sure if the Singapore and U.S. drivers are the same.
Of note, the U.S. site specifically states that the new beta drivers support Leopard's 16-bit printing.

Linda, when I install a new print driver, I go the extra mile. I guess I'm paranoid but here's what I do.
I use the new installer to Uninstall the existing driver.
I use the new installer to Install the driver.
in Print & Fax preferences, I control-click on the Printers list and choose Reset Printing System.
I re-add my printer to the Printers list.
btw, I'm using Leopard on an Intel iMac.
and Bill is right. the drivers on the Singapore site for the R1800 are not new: Date Posted : 2006-04-25. if you're having problems printing under Leopard, you will probably have to wait a while longer.
regards,
Gregory

HT1338 Having difficulty printing with my HP Photosmart 7510 C311a after Maverick upgrade. Tried to install new HP drivers, but thwarted by demand for address under IPVA.

Having difficulty printing with my HP Photosmart 7510 C311a after Maverick upgrade. Tried to install new HP drivers, but unsuccessful.

It did not work after all...
@CHH: This is wheere I downloaded the printer drivers:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=nl&lc=nl&dlc=nl&soft wareitem=mp-84878-2
Good luck and keep us all posted on how you're doing with this problem!
Message was edited by: willem69limbo

TS1717 Help me, please. I uninstalled old iTunes because of troubleshootings. I have downloaded and installed new one. Now it says: The file "iTunes Liberary.itl" cannot be read because it was created by a newer version of iTunes." What can I do?

Help me, please. I uninstalled old iTunes because of troubleshootings. I have downloaded and installed new one. Now it says: The file "iTunes Liberary.itl" cannot be read because it was created by a newer version of iTunes." What can I do?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

I installed New version and now I cant see videos but I can still hear them.

I installed New Version and Now I cant see videos but I can still hear them. I have Tried everything to fix the Problem. HELP PLEASE!!!!

Hello
I have a little bit different problem but its close to this.
I have installed the .10 version and now i cant see any Video on youtube. And it does not play any sound. It not opens anything with flash player.
I deinstalled and rebootet the player. I installed the new version again. 10 times....
I also tried an old version. The 2 older versions. No change -.- its really annoying.
can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
i cant see that animation... but in the help is NOWHERE written what u should do if you cant see that....

Can't remove Gimp drivers to install new Epson driver

I just bought a new Photo printer (Epson Stylus Photo R1800.)
I go to add the printer in the Printer Setup Utility
click Add (The printer appears in the Printer Browser)
I select it; Then it wants me to select the driver from the list in the "Print Using" drop down.
The driver doesn't appear on the list.
I get a ESPON list but only the Gimp list.
ESPON tech support said these 'old' drivers may be conflicting with the new one.
SO, I try to delete old drivers. I delete ESPON folder from Library>Printers. RESTART.
EPSON - Gimp still there.
SO, I also delete Gimp.pkg from Library>Receipts. RESTART
EPSON - Gimp still there.
How do I get rid of these Gimp Epson drivers so I have a chance of loading the new drivers?
I have loaded the driver from the Epson CD 5 times and it doesn't show up anywhere.
Any hints?

Shows you how much the Epson Tech Support people know...........
There is no conflict. You ADD using a different method - After clicking ADD, don't immediately accept the printer when it appears in the browser - instead, click More Printers, then select Epson USB or Epson Firewire, then select Format for: All. Now you are using the Epson driver instead of the Gimp-Print one. Deleting the Gimp-Print drivers won't change this procedure.

New Epson drivers available from UK site - Printing fixed under Leopard now

Installed new driver (6.10 released yesterday). Printed under Lightroom and the print come out perfect!

FYI I used the Epson Pro 3800 driver.

Photoshop CS2 crashing after installing new Epson printer

I just installed a new Epson Workforce 323 all-in-one printer, and its working fine. yay!
But now PS CS2 crashes on opening.
Just Photoshop - everything else is fine - Illustrator, GoLive, InDesign, Safari, Mail, etc.
I have a MacPro running OSX 10.4.11
I have other Epson things - 2 printers (C88 and 2200) and a scanner (1240U), and they've never been a problem.
The C88 printer died (I jammed paper in it, then had to rip it out, which messed up the print heads and all - otherwise it still 'worked', it was just all wonky), which is why I replaced it with this new Workforce 323.
I was on the phone with Epson support and they had no clue about the PS issue.
I had some guy online on "Just Ask" walk me through uninstalling drivers, etc. - also no help in the end.
Apple didn't know either.
So here I am.
Is this a known issue with CS2 and Epson? Do I need to upgrade CS2? Is there a patch or something?
Any help at all would be SO appreciated!!!
Thanks in advance,
Paula

Thanks - A tech guy just left the house, and sure enough, there were some Twain driver issues. I have more than one epson device, and after deleting stuff, then downloading and installing new ones, photoshop is working. PHEW.
My system pref folder was all corrupted too - very weird. Not sure what that was all about, but that's fixed too.
I appreciate your suggestions!
Paula

Installed new Mountain Lion now Date and time do not update

Hi,
I have a new Macbook pro bought June 2011 and find that using Safari and playing a Flash Movie it will glitch the movie stallas and will nor play correctly.
I see Kernel tasks are at 700 Mem and CPU at aaround 7%.
So i reinstall a new downloaded system from Apple Mountain Lion.
Stiil kernel Taskc are at 3 to 5% and and mem at 650meg
I still get the glitches in the new Safari and now i see the Date and time shows but is frozen till i click in the data and time in the upper right hand corner of the screen it will then Upate the time.
What is the problem here a clean install i see permissions have many errors after a clean install and will not fi, with disk utillities
any help here please
Thanks for any time given

wersix wrote:
How do I remove these? Do I just delete the folders using Finder? I'm new to Mac OS X.
I'm seeing a number of posts about network printing problems after upgrading to Mountain Lion. I'm guessing the problem is something other than the drivers themselves.
I sure appreciate your willingness to help me out with this!
Yes, just delete the folders.
There could be other problems, not driver-related, but updating to the most recent drivers will at least eliminate that possibility.
Happy to try to help.

Installing new Nforce drivers?

I'm running the lastest Nforce driver pak from MSI on my K7N420. When the new Nforce drivers from Nvidia come out (Soon I hope) should I be able to install them over the MSI Nforce drivers I'm running now? If not, could someone please tell me an easy way to uninstall old Nforce drivers, MSI or Nvidia.
Thanks
Dennis

Thanks for the reply. One more quick queston. I'm running an Gf4 add in card so removing the Nvidia display drivers in Add/Remove does the video drivers, I know this one. What listing in Add/Remove removes the Nforce drivers?
Thanks
Dennis

Just installed XP and Drivers, Now no mouse or keyboard

Alright, so I just installed Windows XP through Boot Camp and had everything running on my new iMac. As labeled in the instructions, I popped in the driver install CD after I had XP installed (at this point, the bluetooth keyboard and mouse were both working). The wizard came up and the drivers installed themselves. Everything looked all fine until the setup "ended" with an error message that I didn't get to read, because less than a second later, the computer restarted itself.
When XP came back up, I could tell that the video and sound drivers were installed because I heard the startup sound and the resolution was adjusted. BUT, the mouse and keyboard stopped working totally! I tried plugging in another wired USB mouse and keyboard, but the computer didn't detect them either.
What should I try? Just reinstall the whole thing?
Thanks in advance!

No problem!
- Right after I installed Windows XP (a clean install with no other data, of course), I popped in the driver install CD.
- When the installer comes up, close it - we won't be needing that.
- Open My Computer from the Start Menu and find the disc corresponding to the optical drive (Titled "Boot Camp"). Right click on it and select "Open", not "AutoRun". The disc's contents should appear.
- From there, open the folder named "Boot Camp", and then open up "Drivers". In the "Drivers" folder, you'll find a whole bunch of folders that contain all of the drivers for all of the hardware on your Mac.
- You're going to need to manually install all of the drivers EXCEPT the ones pertaining to 'USB' or 'Bluetooth'. Open each folder (better to do them in order), and find the drivers you need to install. It may look overwhelming trying to figure out which ones you need, but it's more simple than you might think. Essentially, each folder contains all of the drivers you need, but there are several versions of them for the different versions of Windows (XP, Vista 32, Vista 64, Win 64, Win 32, etc etc etc...) Figure out which version you have (most likely 32-Bit Windows XP) and install every driver that says anything among the lines of 'Win32' or 'XP' or 'XP32' (you get the idea) (again, avoiding the ones that have to do with Bluetooth or USB).
TIP: The driver installer windows seem to pop up behind the window that you're currently using. Select them from the taskbar.
TIP 2: Some drivers may summon a "Install New Hardware Wizard" window. Just don't touch those. Don't. Touch. They will go away on their own when the device is installed. I promise.
ANOTHER TIP: When you get to the graphics cards installer folders (Either ATI or nVidia), you only need to install the ones for the graphics card that's in your computer!
YET ANOTHER TIP: Don't forget the lingering "MotorolaSetup.exe" installer in the drivers folder!
Hope this helps! If you need any clarification, please ask!
PS: All of the above is why OS X is awesome. Just sayin'.

Installed new IOS. Now phone is requiring passcode. I don't use passcodes. It will not restart, only ask for passcode/

Help. I installed the new IOS and now the phone is requiringa passcode. I cannot do any of the things to identify serial number because phone won't let me get past passcode.

Hello alicelt,
The following article provides the available options for restoring access to your iPhone, and details the steps involved with each.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen

Install new version itunes now i cannot access library

i installed a new version of itunes,now when i click itunes icon on desk top all i get,itunes cannot open folder as new version installed.i have tried to restore to older version with out success,can anyone help me please?

Thank you so much, but I have done that and under "music" there is not a traditional song view. That is exactly where I imagined it "should" be...but under music there is only a box with a couple playlists in it and they appear "light gray" and cannot be clicked on.

Installing new NVIDIA Drivers in Windows XP (under Boot Camp)

Greetings,
This may seem like a stupid question, but I'll ask anyway. Are we able to download and install the latest 9600M GT WinXP Drivers made available here: http://www.nvidia.com/object/geforcenotebook_winxp_185.85whql.html ?
I noticed the ones that came with my MBP 15" are 177.56, but NVIDIA has posted new ones, 185.5.
Can I update to the latest drivers or am I restricted to the ones that came with my MBP and Leopard Installation?
Thanks!

I have been repeatedly advised by Apple that future Boot Camp upgrades may not install properly if users have installed different drivers manually.
I had experienced this myself on my late 2007 MacBook Pro, and I had to roll back the drivers in order to upgrade Boot Camp.
Many issues have been reported about driver conflicts in Boot Camp on the unibody MacBook Pros, and Boot Camp is definitely due for an update. For these reasons, I have chosen not to manually update drivers on my unibody MacBook Pro.
I hope that this helps!
Good luck!

Installed New Hard Drive, Now Can't Install Snow Leopard

Hi All,
Had to install a new hard drive in my system (15" MacBook Pro Early 2010 Model), so I followed the instructions to put in the drive and that worked just fine. Now I need to reinstall Snow Leopard, which isn't working. Here's what I've tried...
1) Boot from the install disc by holding down the "C" key when powering on the system. I hear the drive spin for a little bit, but then it stops spinning and nothing else happens...I just get the Apple logo.
2) Made a bootable USB drive using directions found online. Plugged that bad boy in, held the "Option" key down, and powered on. Got the option to choose the drive as my boot drive. Selected that, and nothing happens. Just get the Apple logo again.
Any thoughts on what I need to do next? Never experienced such a thing.
Appreciate the help.

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting has completed quit DU and return to the installer. Install OS X.

Installed New Epson Drivers; Now No Duplex

Similar Messages

Maybe you are looking for