Installed new itunes and now my ipod will not connect?

I installed the new version this morning and now my Ipod connects for a few seconds then ejects? very frustrating.

Hi atollmedic,
Welcome to Apple Support Communities.
It sounds like there is an issue with your iPod being recognized since updating iTunes. The article linked below provides suggestions that will resolve most issues like the one you described.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
I hope this helps.
-Jason

Similar Messages

  • I just updated to the new Itunes and now my phone will not connect to my computor.

    I updated  to the new Itunes and my Iphone will not connect to my computor now?

    Hi kevin n tracey,
    If you are having issues with iTunes after an attempted update, you may find the following articles helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • I downloaded the new version of iTunes and now my iPod will not open in iTunes

    I recently downloaded the new version of iTunes and not my iPod will not open in iTunes

    Hello, srg60. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • I just got a new computer, and now my ipod will not sync to my new one, even though i "deauthorized" my old one? help please?

    As the title says really. I deauthorized my old computer and therefore i thought that would mean i could sync my ipod, when i authorized my new one but it won't sync to my library on this laptop. why?

    Before you start, remember that connecting to a new iTunes library will erase your device during the first sync.
    Here's how to save your data and settings: How to back up your data and set up as a new device
    After that you can connect it and set it up again. If it is not recognized in iTunes, follow this article: iOS: Device not recognized in iTunes for Windows

  • TS3212 downloaded the new itunes and now my iphone will not sync.  Indicates it is not supported by the software

    Iphone does not work with the new itunes download

    Well before I downloaded the new itunes I clicked the box that dis-engages the auto sync everytime I connect my iphone to the usb coed.  Now when  downloaded the new itunes it displayed a message saying the iphone could not be connected because it hadn't been started?

  • I just loaded my new IPhone 5 to Itunes and now my ipod will not sync

    How do I sync playlists to my old classic Ipod now that Itunes switched me to a new display from my IPhone 5?

    Hi denise mfrompalatine,
    If your iPhone won't turn on, try the steps in the resource below:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    Hope that helps ...
    - Judy

  • TS3716 installed the new itunes and now my ipod nano  does not show in the device menu

    installed the new itunes and now my ipod nano  does not show in the device menu

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • I just did a restore to my new iPhone 6 from iTunes and now my phone will not turn on at all. How do I re-start it

    I just did a restore to my new iPhone 6 from iTunes and now my phone will not turn on at all. How do I get it to re-start?

    Hi denise mfrompalatine,
    If your iPhone won't turn on, try the steps in the resource below:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    Hope that helps ...
    - Judy

  • All my data on my phone got deleted so I restored it through Itunes and now my IMessage will not recieve nor send out messages through my phone number but my email. I've tried alot but non is really working, help please !!

    All my data on my phone got deleted so I restored it through Itunes and now my IMessage will not recieve nor send out messages through my phone number but my email. I've tried alot but non is really working, help please !!

    Ok. You don't have to select your number. Just check your email under your "grey" number and then at the bottom of this page you will see the option "Start new conversations from". Select your number.

  • O changed my email address and now my iPod will not send or receive emails

    I changed my email address and now my iPod will not receive nor send emails.

    I installed a batch of windows updates and now it appears to be fine. Don't understand but it is all good now.

  • I lost all the songs on my itunes and now my phone will not sync with out loosing all my music

    my computer hard drive crashed and i had to re download itunes and now my phone will not sync without erasing all my music

    That is correct.  The iphone will sync with one and only one computer/library at a time.  If you sync to another then it will indeed erase the current content and replace with content from the new computer/library.
    It has always been very basic to always maintain a backup copy of your computer.  Use this to put everything back.
    If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from the iphone.  Without syncing:  File>Transfer Purchases
    You will also need to enter one unique contact and calendar entry in the computer .  When you first sync, you should get the option to merge.  Otherwise this data will be erased as well.
    Much easier to use your backup copy to put everything back.

  • Hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been not help.

    hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.

    - Try restoring on another computer.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have just downloaded update for itunes and now my ipod is not recognised, my ipod is displaying a picture of a usb cable and itunes logo , please help

    I have just downloaded the latest update for itunes and now my ipod is not recognised and my ipod is showing a usb cable and itunes logo please help me.

    Try the troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My ipod was on charge and i turned my pc off and now my ipod will not come on

    my ipod was on charge on my pc and i turned the pc off, and now my ipod will not come back on.

    Hi,
    Plug it into your computer and, after a while, try resetting it:  http://support.apple.com/kb/HT1430. 
    Hope this helps! 
    ---likeabird---

  • How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
    Please try each of the following, in order, until hopefully resolved:
    Note the following are excerpts from an OS X Daily article.
    * Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
    * Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
    * Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
    * Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
    * Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
    * Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
    * Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
    * Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
    * Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
    * Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual.

Maybe you are looking for