Installed new net gear 7550 and airport express won't find it.

My internet provider (Frontier) sent me a new router: net gear 7550. When I plugged it in and configured it, my airport express wouldn't work: flashing amber light. I went into Airport utility . There is a green light next to "internet", but a spinning wheel at the bottom of the window just spins and says "there is no airport base stations found." Also, I downloaded the latest software update for airport express (my software was version 5.6). I then read someplace that my APX must use version 5.6, so I downloaded the previous version 5.6 When I went to install it, the installation failed numerous time. Now I'm really confused about how to fix this problem. Is my APX incompatible with this new router?? Must I buy a new APX? I think mine is quite old, but can't really tell. I need help. I live 4 hours from the nearest apple store.

Also, I have my airport express connected to my computer by ethernet cable right now.

Similar Messages

New Sky Hub Router and Airport Express wifi extension.

I have the new Sky router (Hub) and I am trying to extend the wifi signal in my house but it won't.
I have the 802.11n 1st Gen Airport Express which connects to the wifi network ok but keeps erroring when I try to Extend a wireless network.
Please help as its driving me mad.
Many thanks in advance.

Unfortunately, you always need two Apple AirPort devices to be able to "extend" a wireless network using wireless only.
A single AirPort router cannot "extend" the wireless network of a 3rd party router using wireless only.
If you only have one Apple router, it is usually possible to establish a wired Ethernet connection between the AirPort router and configure it to provide more wireless coverage that way. The downside of course, is that the connection must remain wired between your main router and the AirPort router.
If you cannot run the Ethernet cable, it might be possible to use a pair of Ethernet powerline adapters to send a signal over the existing powerlines in your home. The theory here is that you already have the wiring in place and just need the adapters.
In practice, the Ethernet powerline adapters are not always predictable in their performance in every installation.

Just installed new Time Capsule now my airport express range extender will not work any suggestions

Just replaced my Time capsule that died with a new one now my airport express range extender won't work. Any sugesstions?

Thank you William, I reconfigured the Airport Express and it works perfectly. Sorry I did not get back to you sooner but I came down with a bad cold.
Thank You, and Merry Christmas and a Happy New Year.
raiderron

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

I need a new modem. Which modems work well with MacBook Pro and Airport Express?

I need a new modem. Which modems work well with the MacBook Pro and Airport Express?

You need to inquire from your ISP which modems are compatible with their netwrok. They should give you a list.

Wireless modem and Airport Express.. one at a time

Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
I'm sure I'm just missing something in preferences or settings somewhere.
Can someone point me in the right direction?
Thanks, and Happy New Year!

No ideas?

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

Connecting wireless modem and airport express

I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
Mac

Hi - I have a similar issue.
I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
All three are wirelessly connected to my HG556a Huawei WiFi Router.
The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
It still dissapears from available options in iTunes and AU. ideas?

Network set up using airport extreme, time capsule and airport express

I have searched for relevant answers but can only find different bits here and there.
My set up is as follows:
I have a Linksys wireless router running a stable wireless network for the other computer users in the house and wish to create an extended, additional network using airport extreme connected to the Linksys by ethernet to create the network and then time capsule close to my Mac Mini on my desktop and airport express at the other end of the house to try and extend the range of the network.
I have been trying for 4 days to set this up but without success. I have tried all of the options mentioned in different posts, using WDS, extending a new network etc. I can get connection between the three devices but monitoring on iStumbler there appears to be little improvement in the strength of the signal, iStumbler also shows the time capsule dropping it's signal totally every 10 or so seconds for a few seconds and then I get a positive signal strength for another ten seconds or so.
Can anyone help, it is driving me insane. I am a recent convert to apple computing and have been hugely impressed with all products until now. The claim that the set up of these wireless products is simple seems to be very exaggerated.
I am happy to provide any relevant system or hardware information.
Thanks in anticipation.

I have an AirPort Extreme acting as a wireless base station, connected to a BT router by ethernet.
Then the correct setting for Connection Sharing on the AirPort Extreme would be "Off (Bridge Mode)".
If I set Connection Sharing to "Share a public IP address", I'm told that: "The DCHP range you have entered conflicts with the WAN IP address of your Apple Wi-Fi base station"
Exactly. You have two routers....The BT device and the AirPort Extreme in series with both of them trying to act as the "main" router when you configure the AirPort this way. That won't work.
Only one can be the main router, and it must be the BT device in your setup. So, the AirPort Extreme....and any other AirPorts on your network must be setup to work in Bridge Mode to allow the network to operate correctly.

Apple TV Inference with Time Capsule and Airport express?

I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
The TC and AE are configured to join my existing network....and have happy sat there for a few years.
I would really welcome any ideas.
Thanks
R

Welcome to the discussions!
It sounds like you have the basic configuration covered correctly.
You might want to check some settings on the TC:
Wireless Mode would be create a wireless network
"Allow this network to be extended" should be checked
The AX should be set to "extend a wireless network"
The "allow wireless clients" box should be checked
In this configuration, the ethernet port on the AX is active so things should work.
A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
Please post back with your results.

Is there a limit to the number of airport extremes and airport expresses one should have in a network?

Is there a practical limit to the number of airport extreme base stations and airport express units one should have in a home network?

Then, I had an older Airport extreme that I was thinking about connecting wirelessly in my living room and connecting the DirectV DVR to it by ethernet cable.
Is this older AirPort Extreme the "round" version or the "square" shaped version? The "round" version will not do what you want.
Whenever you extend an AirPort using wireless only, you will experience a loss of bandwidth (speed) on the entire network. That loss might be anywhere from 15-50% depending on how far the extending AirPort device is located from the "main" AirPort.
Even with an excellent signal, if you have 3 AirPorts extending the signal, you will lose 40-50% of the bandwidth on the network. The other AirPorts that are being used just for music are also slowing things down.
He thought there might be problems with using that third airport with the DVR and wondered if I should just use an Airport express there.
It would make no difference whether you used an AirPort Extreme....assuming it was the "square" version or a new AirPort Express as far as performance is concerned.
As to whether you connect the DVR to another AirPort, it might be OK, but you will not know until you try.
If you find that things slow down noticeably, you will need to look for ways to connect the AirPorts together using a wired Ethernet connection. This is always the preferred connection method since there is no bandwidth loss when you do this.
Since downloading video places a high demand on a wireless network, you might want to look for a way to connect the DVR back to your "main" router directly using a wired Ethernet connection as well.

Dumb with Wirless and Airport Express

I have thought about purchasing an airport express for a while so that I could play music from my desktop which is connected to a cable modem on my component stereo. By a stroke of Christmas spirit a friend of mine gave me his airport express because he no longer needs it.
In order to do make this work, do I need to buy a router and a wireless usb adapter for my desktop despite proximity to modem…. Or can I get by with simply the wireless USB adapter and airport express.

In order to do make this work, do I need to buy a router and a wireless usb adapter for my desktop despite proximity to modem…. Or can I get by with simply the wireless USB adapter and airport express.
Good news, the AirPort Express Base Station (AX) is a wireless router so you don't need to acquire another to make this work. However, you will need to add wireless capability to the desktop.
Your network configuration would be something like the following:
Cable modem > (Ethernet cable) > [Ethernet port] AX > (wireless) > PC, AND
AX [Audio port] > (Audio cable) > Stereo
OR
Cable modem > (Ethernet cable) > [Ethernet port] PC > (wireless) > AX [Audio port] > (Audio cable) > Stereo

Creating a bridge with airport extreme (base) and airport express

i am having trouble creating a bridge with airport extreme (base) and airport express. i got the airport express to connect to my network. Airtunes sees it fine. i have an iMac (running Tiger) connected to the airport express via ethernet which i was hoping to get internet on (the iMac doesn't not have built in wireless and i had a spare airport express). now the airport express is no longer visible to the airport setup assistant on that iMac. but, like i mentioned, Airtunes is working fine, and the light is green.
i'm new to the wireless stuff. i am sure i just missed a step. how do i get the iMac to connect to the internet via my airport express bridging to my airport extreme wireless network?
your help is appreciated.

You can do this with the equipment you have. Configure the AirPort Extreme base station (AEBS) to act as a WDS main base station and configure the AirPort Express (AX) to act as a WDS remote base station. That will allow you to use the Ethernet port on the AX.
Unfortunately WDS also causes the available wireless bandwidth to be cut in half.

Question about Time Capsule and Airport Express co-existence

I have a new 3TB ME182LL/A Time Capsule attached to my wired home LAN, in bridge mode. It works fine both as an access point on the upper floors of my home and as a Time Machine device. I also have an Airport Express, whose function in my network is solely to control my whole-house audio system from ITunes. I don't need, want, or use the wireless networking features of the Airport Express. I just have an audio cable running from it to my stereo, and an Ethernet patch cable connects it to my wired LAN. The network mode in the Airport Express is set to "off". Historically, the Airport Express has worked fine in this wired lan mode. However, I unplugged it at some point while having some initial trouble deploying the new Time Capsule and only turned it back on today. After turning it back on I observed something strange. My speedy wireless connection upstairs via the Time Capsule became slow. And when I launched Airport Utility, it drew a network diagram which showed my Time Capsule as a CLIENT of the Airport Express. In other words, the network diagram showed Internet at the top, then a vertical line down the the Airport Express, then the Time Capsule below that. The correct / desired diagram would be the Time Capsule and Airport express as peers. I connected to the Airport Express and verified that network mode was set to "off" but the incorrect network diagram persisted (as did poor wireless performance) until I unplugged the Airport Express. After I did that, the Airport Utility drew the network correctly, although of course it showed a yellow caution sign next to the Airport Express, since it was down. And my wireless speed / reliability returned to normal. What is going on here?

The automatic setup in the airport utility has changed something.
Is the line down to the TC from the express dotted.. in other words is wireless??
Funny stuff happens.
Please post the screenshots of the 3 pages from the airport utility setup for both airport express and TC..
Make sure wireless is set to off in the express.
Both should be set to dhcp on the internet tab and both set to off bridge mode on the network tab.
So for example the bridge on the network tab.
The summary page can also be a help.
There is a half summary page when you click the item in the airport utility.
There is also a fully summary page, when you hold option key and double click the TC icon for example.

TIme Capsule 2TB and Airport Express Base Station

Hi,
just received a new mac book pro, time capsule and airport express. I already had a older imac (Early 2008).
my goal is to connect everything in a wifi at the highest possible speed. The airport express servers also as a itunes connection to my stereo.
I followed basic instruction, all is working except that I can't have the speed a 5GHz (I verify the speed by holding the alt key and clicking on the wireless icon in the menubar) I have n but at 2.4GHz.
what are the correct settings for this. I noticed that if I do not have the possibility to set radio modus to n 5GHz only. the version of airport configuration program that came with the time capsule is 5.5 and the time capsule is on 7.5 the airport express on 7.4.2.
thanks for helping on this.
Message was edited by: dannykite
Message was edited by: dannykite

This looks like you held down the "option" key while you clicked on the Airport icon at the top of your screen.
You were asking about different Radio Modes for the Time Capsule
Open AirPort Utility - Click Manual Setup
Click the Wireless tab located just below the row of icons
Now you will see the wireless settings.
Hold down the option key when you click on the Radio Mode selection box to see more choices.

Installed new net gear 7550 and airport express won't find it.

Similar Messages

Maybe you are looking for