Installed new screen on macbook pro 15" and now it boots fine but doesn't show the grey boot screen???
I recently installed a used but in good condition glossy display on my 15" macbook pro as mine the backlight was starting to have issues and there were some surface scratches on the screen. Anyway the screen works perfect except I don't get the grey boot screen when i start the machine up. You can tell the screen is on as you can see the backlight come on. But the screen doesn't actually show anything until it starts to go into OS X. not sure what the problem could be. I relize this is not a big issue but I am stumped on why it is doing this. Also maybe I am just crazy b/c I have dealt with the other screen for such a long time now but it doesn't seem like I am getting exactly the right colors and brighness on the new screen. I have calibrated it and all and like i said it might just be me. More concerned with the whole no boot screen issue. Anyone experience this before, and if so any solutions for me. Thanks.
It's hard to diagnose but you do have a problem. Take it to an Apple store or AASP and have them diagnose your damage. And, no AppleCare does not cover user accidents. Check with your homeowners insurance.
Similar Messages
-
Installing New Hardrive into Macbook Pro 13" and can't boot
I have installed a new 500Gb 5400rpm drive into my macbook pro 13. Before I swapped the drives I used time machine to back-up onto my Lacie drive. Now the new drive is in. I turned on the computer, pressed the option button and nothing came up. I have now put my old HD into an enclosure and booted up from that drive. I copied my whole hd over to the new drive once it was formatted and tried to boot but this didn't work. I thought once I had the time machine back-up on a drive I would be able to press option when I turn on the computer and then that would workj. I don't have my OSX 10.6.8disk so am now just booting up off my old hd which is pointless. Can anyone help as I am losing my mind.
What happens when you install the original HDD in the MBP? If it does not boot , the connecting cable may be faulty.
Ciao. -
ITMS there anything I can try to restore it? Thank you
That display means you do not have a reconizable boot device. Add to that the drop, and the hard disk is either deeply confused physically or dead.
Other ohysical damage is quite possible.
Take it to a Gnius Bar and have them confirm or deny more damage than the hard disk. -
I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?
All has been installed. Those are there in case you need to do a reinstall. Unlike most Windows based hardware vendors these days. Apple still ships software you might need in case a drive fails. Even in the case of the new MacBook Air, Apple ships the software on a flash drive.
-
My MacBook Pro fell and now when I turn it on its stuck at the apple logo screen with a loading circle underneath it. What can I do to get passed this?
Sounds like something internal was damaged in the fall, probably the disk drive. Take to Apple and ask them to fix it.
Allan -
Hi. I recently changed my MacBook Pro password, and now I don't recall what it is. My hope is that I can somehow gain access without deleting everything currently on it. I do not have the MAC disk that it came with. Is there something I can do myself? Should I take it to the MAC store? Thanks in advance for your help.
It helps with this kind of question to state which system version you are using on the computer as the answer will vary.
Mac OS X: Changing or resetting an account password - http://support.apple.com/kb/HT1274 - resetting password on regular and administrator accounts if you have the installer disc (OSX 10.1-10.6.8) or AppleID (OSX 10.7-10.8) [Of course Apple has changed this document since I asaved the link so it is no longer useful for newer system versions. ]
Reset administrator password in Lion - https://discussions.apple.com/message/16460076
Reset a Mac OS X 10.7 Lion Password - http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
Message was edited by: Limnos -
i installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now
Try a reset to begin with. hold down the Sleep and Home key until Apple logo appears on the screen.
Regards,
Steve -
Help! Just did the Update (ML 10.8.4) after receiving a new HD since mine crashed last week and the shop didn't update it back to Mavricks which I had previously done...and now my Mac won't let me past the log in screen even with correct password entered. It just spins like I'm logging in and then goes back to the user log in screen. I did the process where I restarted and pressed control S and created a new user and password, but once created same issue and can't get passed that screen.
Super frustrated and any help is appreciated!I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan. -
I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?
tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port. -
I set up a new folder for an email sender and now my emails are not able to use the rules that I set up. What can I do to enable them again.
I don't seem to be able to copy a rule, but, this is how one rulel displays.
Name of Rule is Richard Cryar.
If any of the following conditions are met:
From contains rcryar@auduboncapital
Move message to Richard Cryar mailbox
Not only does this rule not work, but all emails are going into the new box I created and not to the inbox. -
i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!
Hello there, RFJA2211.
The following Knowledge Base article offers up some great troubleshooting steps for unexpected power off of your iOS device:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!
There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore -
Hi everyone,
I just installed a Crucial MX10512 GB SSD into my 2009 Macbook Pro. It's definitely much faster, but the read and write disk speed is around 200 Mb/s for both versus the 300-500 Mb/s that the SSD advertised. Any ideas as to why? And is there anything I can do to make it faster? Before I installed it, it was between 80-90 Mb/s.
Specs:
- currently have about 460 of 511 GB of storage available
- am using 2GB of memory
- running on 10.10.2 Yosemite
Thanks!nataliemint wrote:
Drew, forgive me for being so computer-incompetent but how would I boot from another OS? And shouldn't I be checking the read speeds on my current OS (Yosemite) anyways because I want to know how the SSD is performing on the OS I use? And finally, what kind of resources would it be using that would be slowing down my SSD?
Sorry for all the questions - I'm not a Macbook wiz by any means!
You could make a clone of your internal OS onto an external disk. Hopefully you already have a backup of some form
A clone is a full copy, so you can boot from it. It makes a good backup as well as being useful to test things like this.
Carbon Copy Cloner will make one or you can use Disk Utility to 'restore' your OS from the internal disk to an external one.
Ideally the external disk is a fast disk with a fast 'interface' like Thunderbolt, Firewire 800 or USB3. USB2 can work, but it is slow & may effect the test.
You connect the clone, hold alt at startup & select the external disk in the 'boot manager'. When the Mac is finished booting run the speed tester.
Maybe this one…
https://itunes.apple.com/gb/app/blackmagic-disk-speed-test/id425264550
Test the internal & compare to the previous tests
A running OS will do the following on it's boot disk…
Write/ read cache files from running apps
Write/ read memory to disk if memory is running low
Index new files if content is changing or being updated
Copy files for backing up (Time Machine or any other scheduled tasks)
Networking can also trigger read/ write on the disk too.
You may not have much activity that effects a disk speed test, but you can't really be sure unless that disk is not being used for other tasks.
Disk testing is an art & science in itself, see this if you want to get an idea …
http://macperformanceguide.com/topics/topic-Storage.html
Simply knowing that it's about twice the speed would be enough to cheer me up -
Broken screen of MacBook Pro (Retina, 15-inch, Late 2013). Where I can find the part?
I have a broken screen for MacBook Pro (Retina, 15-inch, Late 2013) and I cannot find a replacement. Where I can find the screen? I will install myself. Thanks
Apple does not sell replacement parts, any you find will be third-party knockoffs. Take your Retina to an Apple store genius bar and have the techs tell you what needs to be done. New Retina screens are not cheap, they normally replace the entire lid as a unit.
-
I recently migrated from MacBook Pro to MacBook Pro retina. Now my macbook will not print to my LaserJet3200 printer. I downloaded the drivers but still only prints a line of gibberish per page, and endless pages, when i send printer a print job. Any recommendations on how to correct this so the printer prints properly again?
Hi
where can I find the "generic PCL driver" you referred to Greg?
Also, I searched for a LJ 2100 d4river and found these. should I be working with the HP website? or an apple website? my Apple software update is current.
Find by product
Go
How do I find my product name / number?
5 matches found. Please select one below
HP LaserJet 2100 Printer series
HP LaserJet 2100 Printer
HP LaserJet 2100m Printer
HP LaserJet 2100se Printer
HP LaserJet 2100tn Printer
HP LaserJet 2100xi Printer
Maybe you are looking for
-
Webpage from last session blinks
Product Affected: iPad 3 Hi, I have recently updated from iOS 5.1.1 to iOS 6. After updating to iOS 6, I am experiencing issues with the Safari browser of my iPad 3. The problem is like whenever I open safari, a webpage from previous browsing session
-
Upgrade to iphone - downgrade part of family plan
I am currently under my parents family plan. Our contract ends in November 2011. I would like to get the iphone soon. My father would like to downgrade his plan to something with less minutes. I would like to keep the same plan i currently have with
-
CS2 PROBLEM -- ANY MODERATELY LARGE OPERATION SHUTS DOWN MY LAPTOP
Hi. Need help, if anyone has recommendations. I have Photoshop CS2 on my traveling HP Pavilion zd7000 laptop. 4 gigs of RAM. About 3 gigs of available C drive. Any time I try and paste an image larger than 5 megs, my laptop uddenly goes completely de
-
Remote session via RDGW fine with Windows - not possible with Mac ...?
Hi, I've configured a fresh single RDS Server (all roles on one Server including Gateway) based on Windows Server 2012 R2. Everything works fine when we use Windows 7 with current RDP Client to connect via Gateway/HTTPS. When we use a Mac (OS X 10.9.
-
I am trying to send myself pictures and simple graphics that I have created in photoshop so that I can save them in my photos app on my iPad and iPhone. I've tried a variety of file sizes and even saved them out as .png and .pdf files, but when I sen