Installed new security patch problem

Yesterday installed the latest OSX 10.5.8 security patch and now all incoming mail is being rejected with 550 - no such user, etc. Erased users and re-entered them still no joy. Any help/ideas appreciated. Bruce

deggie wrote:
Because of the security bug that it patches.
So they should update to iOS 7.0.6.
It's the customer's choice to update or not update. If they want the security patch, they update. If they don't, then they don't.
Only the customer can decide what is more important to them; retaining iOS 6 on their device or improving the security of the device.
The only 'rock & hard place' are because of their personal choices.
Oldhippie, only YOU can decide that. IMHO, security is more important than aesthetics. But you need to be comofrtable with the decision, and no one here can help with that.

Similar Messages

Problems after installing new security update-help?

Hi, how can I verify what I recently downloaded on my mac. I installed the security update from software update, and i want to make sure I downloaded something intended for my machine. I have doubts as my machine runs like **** now. Apps take forever to open, screensaver comes on when its set to never, printer won't work, etc. Also, if it was just a bad download, can I just try loading it again over the last one? First, I'd love to see what i downloaded. Thanks. In a bind. Never had this happen before. Running 10.3.9
m

Hi Matthew,
First of all, you should be able to check in your HD/Library/Receipts folder to see what has been installed by looking for the .pkg of it.
re: "I installed the security update from software update, and i want to make sure I downloaded something intended for my machine"
You should not be offered updates that are not intended for your System through Software Update. Software Update, as far as I know, reads the .pkg files in your Receipts folder and will offer what you need from that. (I believe that is correct....perhaps someone will correct me if I'm wrong)
Did you Repair Permissions from Disk Utility before and after the update?
If not I would try running Repair Permissions (HD/Applications/Utilities/Disk Utility/Repair Permissions).
I've found that with Security Updates that it is very important to Repair Permissions before and after updating.
littleshoulders [:-)

New MS patch problems with Apache & SSL on NetWare web serve

This week our users began to experience problems accessing our Intranet based on a NetWare 6.5 box running Apache and using a Verisign SSL certificate. IE would say it was connecting but you would never get there. Firefox could get to the server but I had similar problems with Safari & Chrome.
I discovered that the MS security patch KB980436 had modified some portion of IE and was causing the problem. Uninstalling that patch put us back to where we could once again access our Intranet.
This seems to have something to do with how IE accesses using the SSL 443 port. When, internally, I accessed this same site using http instead of https it worked perfectly.
This patch was applied to Win XP and Win 7 with the same bad results.
If there is a more appropriate place for this post please move it there.

Have you tried the registry settings to go back to compatible mode? The
settings are listed in the MS KB article.
"boomchuck" <[email protected]> wrote in message
news:[email protected]..
>
> This week our users began to experience problems accessing our Intranet
> based on a NetWare 6.5 box running Apache and using a Verisign SSL
> certificate. IE would say it was connecting but you would never get
> there. Firefox could get to the server but I had similar problems with
> Safari & Chrome.
>
> I discovered that the MS security patch KB980436 had modified some
> portion of IE and was causing the problem. Uninstalling that patch put
> us back to where we could once again access our Intranet.
>
> This seems to have something to do with how IE accesses using the SSL
> 443 port. When, internally, I accessed this same site using http
> instead of https it worked perfectly.
>
> This patch was applied to Win XP and Win 7 with the same bad results.
>
> If there is a more appropriate place for this post please move it
> there.
>
>
> --
> boomchuck
> ------------------------------------------------------------------------
> boomchuck's Profile: http://forums.novell.com/member.php?userid=28653
> View this thread: http://forums.novell.com/showthread.php?t=418742
>

Where is new security patch?

It's not in Software Update and I can't find it on Apple website ... but it's all over the IT news sites.
???

2006-03-12 20:29:12 +0000: Installed "Java 1.3.1 and 1.4.2 Release 2" (2.0)
2006-03-12 20:29:38 +0000: Installed "QuickTime" (7.0.4)
2006-03-12 20:29:41 +0000: Installed "AirPort Update 2005-001" (1.0)
2006-03-12 20:29:49 +0000: Installed "iPod Updater 2006-01-10" ( )
2006-03-12 20:31:48 +0000: Installed "Mac OS X Update Combined (PowerPC)" (10.4.5)
2006-03-16 20:54:40 +0000: Installed "J2SE 5.0 Release 3" (3.0)
2006-03-16 20:54:44 +0000: Installed "GarageBand Update" (3.0.1)
2006-03-16 20:56:07 +0000: Installed "Security Update 2006-002 (PowerPC)" (1.1)
2006-04-02 21:52:52 +0100: Installed "iPod Updater 2006-03-23" ( )
2006-04-03 21:51:35 +0100: Installed "Mac OS X Update (PowerPC)" (10.4.6)
2006-04-26 22:07:29 +0100: Installed "J2SE 5.0 Release 4" (4.0)
2006-04-26 22:08:18 +0100: Installed "GarageBand Update" (3.0.2)
2006-05-13 09:47:12 +0100: Installed "QuickTime" (7.1)
2006-05-13 09:47:40 +0100: Installed "Security Update 2006-003 (PowerPC)" (1.0)
2006-05-20 11:11:24 +0100: Installed "iDVD Update" (6.0.2)
2006-05-20 11:13:03 +0100: Installed "iWeb Update" (1.1)
2006-05-20 15:53:31 +0100: Installed "iPhoto Update" (6.0.3)
2006-05-20 15:53:46 +0100: Installed "iMovie HD Update" (6.0.2)
2006-06-06 10:28:35 +0100: Installed "QuickTime" (7.1.1)
2006-06-16 17:11:16 +0100: Installed "iWeb Update" (1.1.1)
2006-06-22 16:09:29 +0100: Installed "iPhoto Update" (6.0.4)
2006-07-02 22:39:48 +0100: Installed "QuickTime" (7.1.2)
2006-07-02 22:39:55 +0100: Installed "iPod Updater 2006-06-28" ( )
2006-07-03 10:19:11 +0100: Installed "iTunes" (6.0.5)
2006-07-03 10:20:41 +0100: Installed "Mac OS X Update (PowerPC)" (10.4.7)
Here's a recent sample from my Software Update log - the last Security Update was in May.
Here are the links:
Security Update 2006-003
Security Update 2006-002.
Security Update 2006 -001
Security Update 2005-009
et cetra....
Other software updates also include security aspects such as patching hoe, where arbitary code can be executed i.e. in iChat/Bluetooth both of which made fairly big news in the blogs this year.
And here's the Security Update summary which covers all important updates.
I haven't seen any recent reports (last few days) and I regularly read several Mac/Computer blogs.
mrtotes
Message was edited by: mrtotes
After some deeper research I found this security report. It would seem 10.4.7 patched 5 security flaws. I would guess they don't exist in 10.3.9 or below.
iTunes 6.0.5 also patched a issue where arbitary code could be executed through an AAC file.
Nothing to worry about here... The news about it came out after the security patch.
Most of the hype will be from Apple bashers wanting to prove OS X isn't as good as it's made out (it's a darn sight better than Windoze in all most all respects) and Security companies (like Symantec) wanting Mac users to start spending out cash on Security Software. Personally I'll take a serious interest once a security announcement comes a long time before Apple patches it!!!!

Sup 2.1.3 new security configuration problems

Hi all,
I created a new security configuration. In the new security configuration I configured for OpenLdap. Then I deployed my MBOs with a new security configuration.
but, when I try to register the devices a error appear:
May 6 09:19:45 dreifs-mini-ipad TEST[2433] <Warning>: onRegistrationStatusChanged: status = REGISTRATION_ERROR, code = 14850, message = SUPApplicationError_REGISTRATION_TEMPLATE_NOT_FOUND
What could be problem?
thanks in advance,
david

Please mark this Discussion with a Correct Answer and Helpful Answer where appropriate. See http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why Even if you discovered the solution without any outside contributions, it helps others to understand what the solution turned out to be.
Regards, Mike
SAP Customer Experience Group - CEG

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

Can't install new Security Update (PPC)

Hi. Im trying to install the new security update for PPC, but somehow i cant. When Im about to choose the destination, the installer said that "You cannot install Security Update...(PowerPC) on this volume.This volume does not meet the requirements for this update."Kind a weird but Im installing it on my iMac's HD & my system is running 10.4.8. I hope somebody can help me.Thanks in advance.

Use Software Update to install the security update. Repair Permissions before and after.

New security patch for ios 6.1.3 on iphone

just read a new article on yahoo news, urging folks with iphones, ipads and the itouch, to update the latest patch for a newly discovered security vulnerability.
The article gave instructions on how to update ios 6.1.3 on the iphone but those instructions don't work for me because my iphone 4s only shows the update to upgrade to ios7 and I do not want to do that.
is there a way to get rid of the prompt to upgrade to 7? And is there a way to update ios 6.1.3 and get the security patch?
Thanks.
Susie

deggie wrote:
Because of the security bug that it patches.
So they should update to iOS 7.0.6.
It's the customer's choice to update or not update. If they want the security patch, they update. If they don't, then they don't.
Only the customer can decide what is more important to them; retaining iOS 6 on their device or improving the security of the device.
The only 'rock & hard place' are because of their personal choices.
Oldhippie, only YOU can decide that. IMHO, security is more important than aesthetics. But you need to be comofrtable with the decision, and no one here can help with that.

Fresh install and update patch problems 119060-17 , 122213-10 , 122912-02

Just yesterday, i installed a fresh Solaris 10 x86 onto some pc hardware. After getting solaris installed and issues with my network card, i downloaded and installed the free version of the update manager 1.0.x. Next, i proceeded to update all the general patches for the solaris 10 system. I started with the command 'pprosvc -i' from a terminal. It then proceeded to download and validate a bunch of patches successfully until it hit the following 3 patches:
119060-17 ---- X11 6.6.2_x86: Xsun patch
122213-10 ---- GNOME 2.6.0_x86: GNOME Desktop Patch
122912-02 ---- SunOS 5.10_x86: Apache 1.3 Patch
All 3 failed some kind of validation and then crashed the pprosvc program, at which point it exited with the following error:
122912-02 cannot be validated
119060-17 cannot be validated
122912-02 cannot be validated
Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digital signature(s).
I also tried to use the GUI Update Manager to update, hoping the problem was isolated to pprosvc, but that problem was also in the GUI with a similar error message:
Error occurred...The detailed error message is: Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digitial signature(s)
Anyone know why Sun's update patch process is so troublesome?
Getting Tired of Solaris Updates...
I should mention that this is the free solaris 10 x86 install and i don't have a service contract with Sun. If this problem persists, i don't think i'll get one, as i see only further problems after buying one.
tired and confused

Hi,
There is an issue with this that is currently being investigated. There is another thread that may shed some light on what is happening here;
http://forum.sun.com/jive/forum.jspa?forumID=316
Thread title is : Sun UC, Digitally Signed Patches Using New Verisign Certificates
In the short-term please ensure that the patch mentioned in it is installed.
To quote part of mentioned thread above:
"Once the Sun Update Connection client software is upgraded with patch 121118-06 (SPARC) or 121119-06 (x86/x64) or later revisions normal behavior will resume. "
If this fails to resolve your problem, would you be kind enough to post the output of the following command for analysis please;
# showrev -p | egrep -e '121454|121119|120336|121082|121564|122232|119789'
Sincerely,
Moderator.
Message was edited by:
ForumModerator

Installed New Security Updates--Now Photoshop Won't Open(?)

I just installed some mac security updates as prompted. I'm pretty lazy about updating so I'm sure that this was not a brand new update. After restarting my laptop, I found that my copy of Photoshop CS2 will no longer open. The program will begin to launch, but then shut down before opening. The usual "program has unexpectedly quit" prompt pops up.
I have since unistalled and reinstalled Photoshop. Same problem with the fresh installation.
What is going on? The rest of Creative Suite is running fine...
How can I overcome this?

sssboyle,
First of all, Welcome to the  Discussions Forums!
Have you tried Repairing Permissions from Disk Utility found in your Applications folder>Utilities?
When open click on the First Aid tab. Select your HD in the left pane and then click on Repair Permissions.
See if that helps,
littleshoulders

Disk Utility doesn't recognize HD. Installed new one, same problem.

Hello,
I have a MBP. It suddenly wouldn't boot up, and had the flashing question mark folder upon starting up, so I figured that the HD needed to be replaced. I ordered a brand new drive, and when I try to install Leopard, it doesn't see the new hard drive. I open Disk Utility to partition the drive to GUID, but Disk Utility doesn't even see the new drive. Just my optical drive is listed.
I hooked up the old hard drive externally to another mac, and it appears to be working just fine. So it isn't a bad drive as I had originally thought.
What else could be wrong? The laptop fails to see any internal hard drives. Is there anything else that I can do to fix this problem? Thanks.

Purely conjecture, your serial ATA controller may be bad (or the cable). I assume nothing shows in System Profiler/Hardware/Serial-ATA either. Maybe try the SMC reset?
-If the computer is on, turn it off.
-Disconnect the AC Adapter and remove the computer's battery.
-Press and hold down the power button for 5 seconds and then release the button.
-Reconnect the battery and AC Adapter.
-Press the Power button to restart the computer.

IPad2 Version 5.1.1 & new security patch

I have an Ipad 2 with version 5.,1.1 that I have never updated. I have updated my Iphone to i0S 7 system ND i HATE IT! soI do not want to update my Ipad. I know it limits me in some ways but the new upgrade on my iphone has me wanting to now no longer have an iphone I dislike it so much. If I could revert it back I certainly would.
For my Ipad 2 then with my current 5.1.1 version....I want to know:
-since I am using 5.1.1 do I still need to add the patch? or am I ok security wise or not?
-if I add the patch will it automatically update my Ipad to i0S 7?
-do I have a choice here & still can remain secure?
Also...I have a personal hotspot that I use if I am in public places.
thanks

Your choices are to keep it at 5.1.1 and take the risk or update it to iOS7 and get the patch
Any device that is eligible for iOS7 will be updated to iOS7 and the only devices that can get the iOS6 patch are the iTouch 4 and iPhone 3.
Ultimately it's your choice, security risk or update your iOS

IMac G5 Leopard Install (New Question, Old Problem)

I've been through a number of the boards over the last two weeks, but I have yet to solve my install problem. I bought the Leopard family pack and promptly installed on my intel mac mini (no problems). However, I have not been able to install on my iMac G5. After I insert the Leopard disk, go through the various prompts and restart the Mac, all I get is a grey screen the spinning pizza. I never get the option to "archive and install". I have gone through the terminal and removed some of the application enhancer programs (as noted in earlier posts). However, the result is still the same. Am I doomed to backing up my disk, wiping it clean, and installing Leopard at that point? Beforehand, thanks for any advice and help.

When I insert the Leopard DVD, it does boot and the "install leopard" icon appears on the screen. After clicking on the icon and inputing my password, my Mac restarts. At that point, I can hear the DVD turning in the drive but the only thing that comes up is the grey screen and the turning circle.

MY wireless mouse keeps quitting. It quits I get 'connection lost'. It starts up i get 'connected'. I've installed new batteries, same problem. Do I need new rechargeable batteries from the Apple store?

My mouse works intermittenly. It quits, I get an on screen message,"connection lost". It starts up again, I get "connected". i've installed fresh AA batteries in the the mouse to no avail. Do I need to go to the Apple store and get some new rechargeable batteries?

Anything in this thread that might help - Woyin's contribution at the end is worth a look:
https://discussions.apple.com/message/17070040#17070040
or the 'make it a favourite' option, that worked for me.

After security patch 03/04/2014 OSX 10.7.5, first one, then a second, external backup drive no longer recognized. Diagnostics for the FireWire one displays brand name of unit, but Time Machine and its own app don't see it. Where do I start?

Yesterday I installed the security patch, OSX 10.7.5 to my IMac that is about 2 years old.
Today my Seagate BackupPlus for Mac will power on but is not recognized. It does not show up as a device, Time Machine says the latest backup was DELAYED, last successful at 03/04/2014 9:35 PM (yesterday) and next backup would begin when the disk was connected. An error message I did not save said basically the drive was not recognized.   I did all drive's troubleshooting steps, including installing a newer version of their app. I tried swapping USB for FireWire, changing electrical outlets, etc.
It seems a bit coincidental to have 2 drives "fail" simultaneously. Is anyone else having this issue after this security patch? What would be the approach from the Mac side? TIA for any assistance.
Please see below regarding the second drive. Is this a red herring, or does it help pinpoint where the failure might lie?
I also have a Seagate GoFlex that WAS recognized until I did the troubleshooting on the other drive. When I put it back on after testing the other drive with FireWire, it now is no longer recognized.
Diagnostics says this about that:
FireWire Bus:
Maximum Speed:          Up to 800 Mb/sec
GoFlex Mac:
Manufacturer:          Seagate
Model:          0x6090
GUID:          0x2037600121908F
Maximum Speed:          Up to 800 Mb/sec
Connection Speed:          Up to 800 Mb/sec
Sub-units:
GoFlex Mac Unit:
Unit Software Version:          0x10483
Unit Spec ID:          0x609E
Firmware Revision:          0x111
Sub-units:
GoFlex Mac SBP-LUN:
Thirdly, in after one of the testing/reboot loops, the HP WiFi printer was no longer recognized, but after a few more it came back.

I have a similar problem.
Moreover, as my external drive is split in 2 for (a) regular storage // (b) time machine usage, I can see in the Finder that I can connect to the (a) regular storage part and use it normally (image 1).
And I cannot connect to the backup part in Finder , nor see it in Disk Utility, nor use it in Time Machine (although it's listed in the Time Machine preferences, image 2), as it does not connect (image 3).
Can somebody help?

Installed new security patch problem

Similar Messages

Maybe you are looking for