Installed NEW Soundblaster Audigy 2 ZS Drivers... No Sound from side left spea

I installed the NEW 2.8.4 Drivers for my Audidy 2 ZS and now I have to sound comming from my side left speaker. When I do the speaker tests, all the speakers work except this one.
Is anyone else having this issue. I even reinstalled the drivers again to no avail.
Urgghgh this is anoying. I get dead silence from my side left. I am using Creative T7800 7. Speakers too by the way.
If anyone can help, please let me know.
Thanks,
iLLz

JohnZS wrote:
Hi iLLz I do not have this issue with the new drivers, however may I suggest you uninstall the old drivers first. To do this. Locate the downloaded driver exe. SBAX_WEBUP_LB_2_08_0004.exe Extract this with an application called WinRAR http://www.rarsoft.com Once you have extracted the driver file run the .exe called setup.exe in your drivers folder. eg. SBAX_WEBUP_LB_2_08_0004\Drivers Select the uninstall option. Good Luck
As for additional info ...
When you update drivers by running the setup.exe found on \Drivers -folder, (or ctzapxx.exe found on it's \Support\i386 & amd64 sub folder ) --> select (tag) the "Overwrite existing shared ..." -checkbox --> you do not need to run this uninstall process at all.
jutapa

Similar Messages

Really low sound from rear left spea

I have 5. headphones and when i have them pluged into my xtreamgamer i barly get any sound from my rear left speaker, i know it works because if i plug it in my basic MB soundcard it works fine. Is this a known problem or a fix for this?

I've installed the latest drivers, made sure the the jack is plugged in right (theres only one, that comes from the Monitor or the headphones). The CD only has an installation guide, and i know onboard sound is disabled because i never had one in the first place after a recent reformat. and before that reformat sound came out from both sides normally, so i know something is wrong with the sound card.
EDIT: i just did a random tests, and i found out that the right speaker is working, but it is playing extreamly low. i had to blare up my volume up to 00% and i bearly heard it. i've checked the playback control, and played around with it and still have same problem.Message Edited by Bigs80 on --200606:49 AM

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

Inspire T7900 no sound from side...

Hi there, i've just buy an "Audigy2 ZSplatinium", an "Inspire T7900" and a "decoder DDTS-100"
i've try to connect my sound card to my sub without the decoder, i don't have any sound from side speaker, if i switch rear and side speaker, the speaker itself works, but it seems the sounds don't come to the side...
i've try to connect with the decoder, in analogic, and optical, same problem...
when i try to calibrate the audio systeme, i can hear sound from front speaker (all 3), both rear, but when the programs wants to test side one, i got a horrible sound, like "HIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII III" at the place of the usual "left side" or "center".... i've try to finish the calibrate but the programs say my cable aren't connect well, i've RE-check all, it's good.....
i've all deconnected, uninstalled, and RE- install ALL the syteme.... same problem
I'm starting to become crasy.
I don't know if the probl?me comes from my sound card or my audio sytme....
PLS help me....

stiaros,
Not sure if you are able to install the EAX4 driver for your OEM card but you can try installing it - EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2/Audigy 2 ZS. After you are done installing that, do a search for this filename CTPANEL.EXE, you should be able to configure the card through this.
JasonMessage Edited by Jason-CL on 05-27-2005 06:08 PM

FAINT sound from Side Speak

Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

New Soundblaster Audigy Fx Install, No sound

I installed the new Audigy Fx card in my computer but cannot get any sound from the speakers. I double checked that the speaker cable was installed correctly.
Here is my setup
AsusM4A78-M MB w/ on board sound-(disabled)
AMD Phenom 2 2800Ghz processor
8 GB memory
EVGA GTX760 Ti video card
Direct X 11
SoundBlaster Audigy Fx PCIe card
Any suggestions would be appreciated.
DuxRus

Yes, the controls are unmuted. I used the following:
$ amixer set Master 90% unmute
$ amixer set PCM 85$ unmute

PLEASE HELP: installing my Soundblaster Audigy LS-soundcard with the latest hardware(bundle)drive

Problem:
I have a Soundblaster Audigy LS Soundcard in one of my PCI slots (I already tried the other slot with the same result). I run Windows XP professional SP2.
When I install the hardwaredriver-bundle version: Sound Blaster Audigy LS .04.0055, I have no problem, but when I install version .0.4.077 (in this example: or I install version 055 or I install version 077), I have the following problem: (through Control Panel) in system properties/hardware/device manager, I find PCI Device listed in " other devices " with a black exclamationmark in a yellow circle, while the SB Audigy LS is listed in the group " sound, video and game controllers ". The soundcard works, which is great but why is the exclamationmark showing? I already tried a different PCI slot, IRQ assignement in BIOS, but is still shows. The strange thing is, if I install first version 055 and then version 077, the problem is gone. A new problem that occurs if I do so, is that the PC hangs when starting Windows (but I'm not sure if that has to do with the fact that I install version MediaSource 5 Player-Organizer 5.20.23 over version 5.0.38, just to keep the MediaSourceGo! Toolbar (because it's no longer part of the softwarebundle version 20.23 - which has been confirmed by the support of Creative), the same with version of CD Burner Plugin 5.0.44 over 5.0.3 because it's not really clear on the website, if you need the previous version or if it's a full "update"). Please URGENT (with detailed info on every explained problem/issue - so I can try to resolve it) help.
Thanx,
Oli4
Message Edited by Alejandrootje on 0-02-2008 09:55 PMMessage Edited by Alejandrootje on 0-02-2008 09:56 PMMessage Edited by Alejandrootje on 0-03-2008 0:38 PMMessage Edited by Alejandrootje on 0-06-2008 02:9 AM

maybe you should ask Eugene Gavrilov (?) to write his KX-Drivers for MSDOS too.. maybe he'll do so if you donate him an Audigy 4 *lol*

Audigy 2 ZS no sound from analogue outputs

I have an Audigy 2 ZS with no sound from the analogue outputs, though i believe the digital out is working.
I have been told the card was flashed with alternative firmware.
i got this secondhand so i have no idea this is correct.
can i obtain the original firmware for this device?
i have tried many drivers / settings & no results.
any help would be appreciated.
John

Test with Ubuntu live disc and make sure the card output is used for output and not some HD audio on-board that takes over.
Also this Audigy 2 have the habit to require from time to time reseating in the slot.
So check the card as well ,or reinstall it in the slot even if it looks well.
Maybe you should find with what firmware was it flashed and try drivers for that device.
I wonder if it ever outputted any sound after that update of firmware

DVD Audio- I want sound from sides, not r

Is there any way to reconfigure so that surround sound from dvdaudio comes out of the side speakers instead of the rear when using a 7. setup?

Blakejohann,
I am not aware of any way to do this. The mapping to the channels is discrete and our card doesn't have software that allows remapping channel outs.
Jeremy

Only getting sound from the left earphone

I changed headphones to make sure its not a headphone problem but there is no sound from the right earphone. If I press the connector deeper into the socket then both the earphones work fine, however, I have to keep it pressed down with my finger. Does not work of its own accord. I have had it for 13 months now...any tips anyone?

I have had a the same problem, only its my left headphone that doesnt seem to work.
I've tried using dozens of headphones and speakers but the left speaker or headphone never works.
I have found a cheecky way of getting some sound through however. If you push the ipod jack up at an angle to the roof of the ipod jack hole then you should find that it works. Just press down on the ipod jack (nib bit close to the speaker hole).
Only problem with this is that you have to hold the ipod to listen to it and it can become quite tiresome. As soon as you let go it will stop sound going through that speaker.
I did also find out that this happens to quite a few people and most commonly is caused when dirt (e.g. sand) gets into the ipod jack hole.

Easy way to install the entire audigy 1 drivers

1. Copy the entire audigy 1 setup cd to the hard drive
2. Go to the Setup Directory
3. Open the file audio.ini
4. Look for the line that says CardDetection = 1
5. Change the 1 to a 0 (this will disable the card detection)
6. Finish the installation
This will install the original drivers and software onto your computer. To update the drivers, you have to download the drivers, unzip it, and then update the drivers thru the device manage "update driver" option.
The only problem is my 1394 still has an exclamation mark and my gameport still does not work.

Correction:
After you change the CardDetection value, save the file. Then run the setup.exe that is in the same directory.
Hope this helps.

I have just bought a MacBook Pro..13".. the graphics are all screwwed up. I can't get it to come around with the onboard adjustments. which and how to I install new Graphic INTeL 4000 drivers ?????

Well no one out there. I hate to have to take this 13" Mac Book Pro back , get my money back . Seems I'll have to. This is about the third time I have asked for help from Mac (APPLE) and I never hear back from them..

Does that problem happen with some applications? If so, the problem is that you are using applications that are not designed for Retina display. The developer should have done that months ago.
If that's your problem, first check that your applications are updated. If you want to make them look better, you can decrease resolution in System Preferences > Displays, but do not worry, because this does not mean that your MacBook Pro is damaged.
However, if you cannot use your Mac because the GPU is not working correctly, you have to return it and get another one

Inspire T7700 7.1 + Audigy 2 ZS - NO SOUND IN REAR LEFT SPEAKER

can u help me please? after a new position of my speakers my rear left speaker didn`t work.i try all
i try 2 change this speaker in other position(center, left, right...) all fine ,but when i put in rear left this and other speakers don`t work((((((( what can i do??
win xp sp 2

Unplug the minijack connectors (orange, green, black, and gray/white) from the subwoofer's amp. Leave them connected to the soundcard. Plug the green connector into the minijact port that's meant for the rear speakers. This should make the sound meant for the front come from the rear instead.
Now play some music or run some tests. Does the Rear Left speaker work? If so, then it's a software problem. You would just have to wait for an update or you could try uninstalling the drivers (run CTZAPZZ.exe on the driver CD; in Drivers directory) and reinstalling them and the updates.
If it still does not work, then it sounds like a problem with the amplifier in the subwoofer. In this case, you'd have to return the speakers for repair.
Message Edited by TheJ on 05-26-2005 11:38 PM

Problem: installed new hard drive but can´t boot from leopard dvd

So I just installed a new hard drive in my ibook G4. At first I started up the computer using the leopard DVD I had purchased. Got to Disk Utility and after a few seconds in the spin wheel came up and froze. So, I shut the computer down and when I tried to boot it again from the DVD I wouldn´t even reach the apple screen. Tried it a few times unsuccessfully.
As an alternative I just tried booting the comptuer using the original CD and it did read it.
I am currently at the installer page but I am concern about installing the old CD as I really would like to run the leopard dvd 10.5.
Is it that my ibook g4 can´t be booted from leopard dvd?
Please advise. thanks!!

OK, so I decided to leave my computer resting all night and give it a new try this morning.
This morning I was able to boot from the Leopard DVD, so I don´t really think it is a problem with my superdrive. Started to format at 32 minutes to complete. Then towards the 10th minute the spinning wheel appeared, I heard the fan running, then it stopped and then I heard the superdrive making some reading noises. Then all noises stopped and now the spinning wheel continues..not sure what to do now.
In the meantime, I wanted to share also another problem that I´ve been having for quite some time which I don´t know if it is related to my current problem. It is with the computer power:
- I´ve been experiecing load surges that take my computer from 100% to 1 or 0% and then goes to sleep or shuts down. The same thing happens when I am charging the computer.. it starts charging and showing 2 or 3% charge and then jacks up to 100% in minutes.
- My computer also makes like a slight humming noise sometimes when the ring around the power cable is in orange color, so I move it around until it stops. When I do that sometimes it goes from orange to green eventhough it is not fully charged. There has been times that under green it appears to be charging (battery charging icon on desktop shows up), and other sometimes like right now when it is in green color and the battery icon on the desktop says ´99%´. Weird enough, once I get the cable in a certain position it enables the battery to charge, if I keep it without moving it, the load surges disappear (at least for some days).
Should I try resetting the PMU? I´ve not done it because I don´t know what consequences it may have.
NOTE: When I bought the computer I never calibrated my battery because I was (and still are) clueless when comes to computer technicalities. I tried using a different power adapter and get the sample problem.
Below is the information I get from coconut battery:
My battery is in its 256 load-cycle. current battery capacity 58512mAh (original battery capacity: 4400 mAh).
The last system profiler I was able to pull shows:
Battery Information:
Charge Information:
Charge remaining (mAh): 58320
Charging: No
Full charge capacity (mAh): 58512
Health Information:
Cycle count: 256
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 16250
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Dynamic Power Step: Yes
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
AC Charger Information:
AC Charger (Watts): 26
Connected: Yes
Charging: No
Any help is greatly appreciated.
Thanks a bunch!!!

If I install new hard drive can I still restore from time machine?

I'm planning on updating the hard drive in my macbook to a 320gb drive. I currently have a drive with around 120gb of space. I know there are programs available to back up the entire hard drive. But, I've been having issue with my computer lately and I would rather just start over and just back up microsoft office because I don't have the key anymore and my iTunes library. Can I do all this from just my Time Machine back-ups and reinstall everything else? Or is the best way to make a bootable back up to my new drive and then install the hardware in my mac book.
Message was edited by: dsheppard20

I did this just a few weeks ago. I replaced my 80g hd with a 320g hd. I used time machine to backup my computer. All I had to do was swap hard drives. Use the install dvd to start computer. i then used disk utility to properly format the new hard drive (mac journaled). Then I used the restore option. That was all I had to do. Everything from my old hard drive was put on my new one in about one hour. Time Machine backs up your entire hard drive unless you excluded anything. So you can have a clean install of everything just the way it was on your old hard drive just by using Time Machine.

Installed NEW Soundblaster Audigy 2 ZS Drivers... No Sound from side left spea

Similar Messages

Maybe you are looking for