Installed New Toshiba 320gb hard drive...windows 7 professionaL 64 bit cant find hard drive

I recently got a replacement hard drive from HP...a Toshiba 320gb(MK3261GSYN)...I installed the hard drive into my hp probook4530s(XU074UT#ABA)...when I go to install windows 7 professional 64 bit edition, windows isnt able to find any hard disk to install the operating system on. But before even putting in the windows 7 disc, the computer asks me to install a operating system onto my hard drive. Also when I do a hard disk check test...the hp bios software automatically says the hard disk has failed.

Hi,
Before going any further, I would like to verify these situations:
1 Did this issue appear before?
2 What have you done with PC before the issue appear?
According to your description, that seems the issue related with driver or programs conflict with Windows 7. I suggest to perform these tests to troubleshoot
the issue:
1 Unplug all unnecessary hardware and login with Safe Mode or
Clean Boot
2 If it works well in Safe Mode, please remove all third party tools or programs, reinstall or update the hardware drivers to the latest version.
3 If the issue persists, you can perform an in-place upgrade to fix the system issue:
http://support.microsoft.com/kb/2255099
Hope that helps.
Regards,
Leo Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

K7n2 Delta Ilrs "Windows Setup cant find hard drives" plzz help

hia guys i know this has been in many posts but my question isnt answerd im affraid ok here we go
im trying to get win XP sp2 installed on my new hard drive (ill get to why i have this new hard drive soon lol
1) boot the system and press Ctrl + F and setup an array (stripe) all says functional etc save and exit
2) put in the xp disk and boot
3) press f6 and install my sata drivers (i got off the main web site)
4) press enter to install windows
5) "windows setup cannot find any hard drives" ???????????
basicly i had ubuntu on my pc using an 80gb sata ii set to sata i all was good and fine i got bored and wanted windows back to play games again so i put in my xp disk and tryed to install it but it said cant find hard drives i thort i had killed the disk with the grub bootloader messing up the mbr so i got a new disk and re set the bios and cmos etc went to instal xp and the same problem remains
all my m8s dono wht to do nore do i were all stumped with this one as the new drive wont be recognized by windows
strange thing is when i put the 80gb back in ubuntu loads up fine (i only have 1 hard drive in at a time)
please help meeeeee
K7n2 Delta Ilsr
barton xp 2800 +
X700 ATI AGP
1.7 gb ddr 400 ram
80gb sata maxtor dimond max (ubuntu)
160gb sata maxtor dimond max (new)
bios "W6570MS V7.6 110703

Quote from: Qtip on 16-September-07, 10:17:09
Also, what are new MBs doing so that one doesnt have to deal with this annoying F-6 step? For some reason I think I heard new MBs dont require this F-6 step.
for his mobo, the drivers are absolutely necessary to be loaded when SATA HDD are used. that is due onboard sata controller.

Try to install new itunes software on my Windows XP system. Stop installing because cannot deinstall old version of bonjour.msi. What to do?

Try to install new itunes software on my Windows XP system. Stop installing with the message cannot deinstall old version of Bonjour.msi. What to do? Cleaned already registry.
KR,
Bernd

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

Windows 7 can´t find the driver for HP Officejet 5510. (Windows Update is set to automatic.)

Hello everyone, I just installed Windows 7 - 64 bit. Supposedly the driver for the HP Officejet 5510 will install automatically in Windows 7 when connected via a USB, which is not happening.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4063&product=311...
I am getting the message that Windows 7 can't find the driver. I don´t understand why?
My Windows Update is set to automatic.
I see the device under printers. But when I click on it it says driver missing.
Is there any solution? Possibility to get the driver some other way? Unfortunately HP doesn't provide a download on their website.
Can anyone help me, pleease?
Honza

I have the same problem. I spent all this money to get more features, not less so Windows 7 should run all of my XP stuff. Now I see that my HP Officejet 5510 all-in-one won't scan and I can't save in pdf format. C'mon HP....give us a driver! If I wind up having to buy another printer, I swear it won't be an HP if I get abandoned on this one. And I'll also switch vendors for all of the printers I'm responsible for replacing at work too.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

Im trying to transfer my cs4 from my old pc to my new pc without a media disc. I cant find my licensing volume #. What steps do i need to take to make it happen?

Im trying to transfer my cs4 from my old pc to my new pc without a media disc. I cant find my licensing volume #. What steps do i need to take to make it happen?

Contact Customer Care

Downloaded photoshop elements 13 with windows 8.1. cant find it

downloaded photoshop elements 13 with windows 8.1. cant find it

restart the download and note where you're storing the file.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Palm 755P (Sprint) not synchronizing with new Toshiba Satellite L305D operatig Windows Vista.

OK Please help the new guy....
I have a Treo that is a month old. It was previously synchronized with my old computer. My old computer took the dive. I bought a new Toshiba Satellite L305D-S5938t aht is running Windows Vista.
I tried to locate the Palm Desktop via the disk in the Treo box from Sprint. No dice. The Desktop loaded, but I can't synchronize my Treo. There is no available USB connection.
So, I played around with it and tried to get it to connect via bluetooth.... NO DICE.
Very frustrating.....
Does anyone have any advise at all?
Can anyone point me in the right direction?
Anybody out there have a solution?
Has anybody beside me encountered this problem too?
Please advise.....
Post relates to: Treo 755p (Sprint)

Hi.. Welcome to the Palm forums. My first assumption is your Vista is a 64bit version. That being the case there are no usb drivers available which is the reason for the problem trying to sync via cable. You are headed in the right direction as bluetooth is the only way your going to sync. First the computer has to be bluetooth compatible or you need to purchase a bluetooth dongle and get it installed and then get the two to pair. From there if you go the the windows hotsync thread here you will find a sticky that explains the process. Also here is a knowledge base article about how to sync via bluetooth. http://kb.palm.com/SRVS/nua/launchKB.asp?c=41559
Post relates to: Centro (Sprint)

Trying to install new Hardrive...can't get it to format the drive

I just bought a Maxtor Maxline Plus II 250 gig hard drive for more storage and as a second bootable drive, I'm having trouble with my current drive. I installed the drive and turned on the computer, The drive comes up in disk utility but will not allow me to format or erase the drive. I even tried from the Mac OSX install dvd and still nothing. I bought the drive on ebay and the guy says it needs a low level format? Does anyone have any suggestions...I'm pulling out my hair here.
Thanks

Hi-
Welcome to Discussions!
the guy says it needs a low level format?
That's not within the realm of the end user.
Low level formatting is done at the factory.
If the drive can't be erased, return it. Something is wrong.

Itunes error 7 Unable to install new version of Itunes on Windows 7

I am stumped. Have tried to install the latest iTunes download on my PC (Windows7), have tried everything to get it to work. Uninstalled all Apple programs, disabled my anti-virus... so frustrating! Have been trying for a few hours and do not know what to do.
It looks like there is an error with the iTunesHelper

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Cant find hard drive

so i just put in a 2 hard drive into my g5 and i cant find in when it boots up and in finder i cant see it. and im trying to put a newer vertion of osx on the 2 hard drive so.. if anyone made seens out of that.. help?

After installing a new drive run Disk Utility. The drive should show at the left. Select the drive and use the "Erase" function to format it as "Mac Extended Journaled". If the drive doesn't show in "Disk Utility" it may be not connected properly, or it may have SSC (Spread Spectrum Clocking) enabled. The built-in disk controller on the G5 will not work with SSC. Some drives can disable SSC via a jumper change, others have to have it changed via a PC.

Installed iTunes 10.2.1 for Windows (64-bit), Error 7 Windows 998

Hello
After updating iTunes 10.2.1 for Windows (64-bit)I am getting the dreaded iTunes was not installed correctly, Please reinstall iTunes. With error 7 (Windows error 998) popups.
Tried already all the known uninstall/install/repair suggestions. Tried runnng as administrator or changing permissions. Tried disabling Bonjour Service.
Until now nothing has repaired it.
Is there a way to fix this? Can it be an Adobe update?
Is there a way to get an older version?

I had the same problem. I tried doing a system restore to a day or 2 before i did the update. The restore was successful but the itunes problem remained. After that I went into the control panel, selected itunes and clicked the repair tab.
It now works fine for me. The only other step I took was to copy my itunes folder into another location in case anything went wrong. Once the repair was complete I simply replaced the new empty itunes folder with my previous one.
Hope this is of some help.

WINDOW 8.1 Cant find USB 3.0 Driver for H87 G43 Gaming

Cant find USB 3.0 Driver for Win8.1 64bit.

i don't see such drivers for Win8:
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProdId=3467
probably Win8 already include those drivers

Cant find audio driver for 3412TU

please help me..i cant find right audio for 3412TU...
plus i'm having prob with audio..even i plug mic n headphone,stil can hear sound...when i'm in mute, still can hear sound too..help me pls...thanx...

After installing Microsoft UAA driver from V3000t, if the Conexant still gives an error,check in Device Manager under System Devices to see if MS UAA installed properly.
There should be a listing for Microsoft UAA Bus Driver for High Definition Audio.
If not,you should have a PCI with yellow!.Right click it and Update Driver,No to Connect,No to Search and last Install Automatically.
Reboot to check status.
==============
If you have SP3 installed,you will need this UAA:
http://couponmeister.com/blog/HD_Audio/KB835221.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game on the windows and i cant find a proper program to actually setup the game someone help me please

hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game called guild wars 2 and i cant find a proper program to actually setup the game

Only if you decide to share with us your particular situation. Guild Wars should install and run like any other Game. Other than the Game Installer, Games don't need some other installer to make them work. Only someone who reads the instructions for the proper installation.

Installed New Toshiba 320gb hard drive...windows 7 professionaL 64 bit cant find hard drive

Similar Messages

Maybe you are looking for