Installed OS X Server, lost access to files and programs. Need to regain access but unsure how?

I have just installed OS X Server. I have shut the Computer down overnight and on restart has removed my access, personal settings and access to all my programs and file. I have checked the size of the hard drive, it appears all files are still present? Under settings I am still listed as a administrator, I have accessed 'Applications' and opened OS X Server. My Access is still Administrator but I don't know how to return my profile to have access to all files and restor my desktop and settings.
I someone could help that would be fabulous.

Safe to presume you didn't make a cloned backup of your system prior to installing the software?
At this point it is difficult to tell what original settings are left. Why not do the Time Machine restore?

Similar Messages

There was a problem connecting to the server "my server.local" this file is available on your computer. Access the files and volumes locally.

Hi,
I have a strange problem connecting one of the office laptops (Macbook Pro 10.7) to the disk in the Apple Time Capsule. It's just one laptop that has this problem and the other 3 no problems at all and they all run OS X 10.7 Lion, I can access the Time Capsule disk over WAN on all machines but locally on the problem machine i get this message "There was a problem connecting to the server "myserver.local" this file is available on your computer. Access the files and volumes locally." Now from this message it sounds like the problem laptop thinks the network drive (Time Capsule) is the same as it's self in the way of name or address however they clearly have different IP addresses locally.
Any ideas on this would be apreciated as I can only think a clean install but don't want to do this if not necessary.
Thanks
Jarrah

I think I gave you some bad info in the above, where i enterered the text "myserver.local" & "example.local" this was the host name of the server (Time Capsule) so not local on the computer.
No i didn't try your method, I'll give it a go - I thought the folder option was for local files and not on a server ?

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Auditing failed access to files and folders in Windows Storage Server 2008 R2

Hello,
I've been trying to figure out why I cannot audit the failed access to files and folders on my server. I'm trying to replace a unix-based NAS with a Windows Storage Server 2008 R2 solution so I can use my current audit tools (the 'nix NAS
has basically none). I'm looking for a solution for a small remote office with 5-10 users and am looking at Windows Storage Server 2008 R2 (no props yet, but on a Buffalo appliance). I specifically need to audit the failure of a user to access
folders and files they are not supposed to view, but on this appliance it never shows. I have:
Enabled audit Object access for File system, File share and Detailed file share
Set the security of the top-level share to everyone full control
Used NTFS file permissions to set who can/cannot see particular folders
On those folders (and letting those permissions flow down) I've set the auditing tab to "Fail - Everyone - Full Control - This folder, subfolders and files"
On the audit log I only see "Audit Success" messages for items like "A network share object was checked to see whether client can be granted desired access (Event 5145) - but never a failure audit (because this user was not allowed access by NTFS permissions).
I've done this successfully with Windows Server 2008 R2 x64 w/SP1 and am wondering if anybody has tried this with the Windows Storage Server version (with success of course). My customer wants an inexpensive "appliance" and I thought this new
variant of 2008 was the ticket, but I can't if it won't provide this audit.
Any thoughts? Any of you have luck with this? I am (due to the fact I bought this appliance out of my own pocket) using the WSS "Workgroup" flavor and am wondering if this feature has been stripped from the workgroup edition of WSS.
TIA,
--Jeffrey

Hi Jeffrey,
The steps to setup Audit on a WSS system should be the same as a standard version of Windows Server. So please redo the steps listed below to see if issue still exists:
Enabling file auditing is a 2-step process.
[1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
for "Audit object access."
[2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
- auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
A similar thread:
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/da689e43-d51d-4005-bc48-26d3c387e859
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

IOS 6 installed, now I've lost Streetview, Googlemaps, Youtube and even the Appstore cannot be accessed!

IOS 6 installed, now I've lost Streetview, Googlemaps, Youtube and even the Appstore cannot be accessed!

YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
 Cheers, Tom

Windows 7 computers asking for network password to access shared files and printers on Windows XP PRO computer.

I have a network of 10 computers configured as peer-to-peer work group. I have upgraded one of the ten from Windows XP PRO to Windows 7 PRO. The other nine computers are all running XP PRO. AS near as I can tell they are all configured the same. I have the
same user and same passwords on all computers. One of XP computers is used as a print server. The Windows 7 computer initially was able to access shared files and printers on all XP machines with out requesting a network password.
Suddenly, the Win 7 computer began requesting a network password to access the shared files and printers on the XP print server. It will not accept any of the user names or passwords (all administrators on both machines with identical names and passwords.)
The Win 7 computer has no problem accessing the shared files on the other XP machines. It can even access shared printers in a different work group. Apparently something has changed but I'm at my wits end trying to figure what changed on either the Windows
7 machine or the print server XP machine.
I would appreciate any help. Thank you

Hi,
Based on my research, I would like to suggest the following:
1.
Disable simple file sharing on the Windows XP computer:
How to disable simple file sharing and how to set
permissions on a shared folder in Windows XP
2.
On the Windows 7 computer, go to “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” and ensure that the
following items are turned ON:
Network Discovery
File and printer sharing
And this one is OFF:
Password protected sharing
3.
Temporarily disable or remove all the security software (firewall, anti-virus, anti-spyware, etc.) on the computers and check if it works.
In addition,
I would like to share the following with you for your reference:
Troubleshoot file and printer
sharing
Hope this helps. Thanks.
Nicholas Li - MSFT

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Accessing a file and reading its contents.

Hi all,
I created a Portal Application to access a file and display its contents in an iView .
But it showing the exception like "File Not Found".
In simple java application i could able to get the result. In portal application i couldn't .
I have given the full path of the file location.
I need a help regarding this?
Regards,
Eben

IS the file on the portal server? It must be visible to the service user that runs the Java engine...

I lost an .msi file and cannot do updates, how do i fix the file?

I lost an .msi file and cannot do updates to my Itunes system, Apple has not been abe to help, where do i find the .msi file or how do i repair the system? All prior updates to the system have worked, but the latest 10.5.2 will not update due to this lost file.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

I recently installed OS X Server on my mac mini and found that it took up almost 170GB of space on the hard drive, is that possible ?

I recently installed OS X Server on my mac mini and found that it took up almost 170 GB of space on the hard drive , is that possible ?

In the Server cache what is an OK setting ..... I mean how many GB 25, 45, 60, ? Any suggestions ?

I have a Macbook Air (july 2012) with OS X 10.8.3 installed. I have dvds with .vob files and have Quicktime Version 10.2 (603.12). I can't play the DVDs. Thereare some features of QT that I like, e.g. precise frame selection and save as .png file-help

I have a Macbook Air (july 2012) with OS X 10.8.3 installed. I have dvds with .vob files and have Quicktime Version 10.2 (603.12). I can't play the DVDs. There are some features of QT that I like, e.g. precise frame selection and save as .png file-help. Am I missing some Apple software? I thought QT for Mountain Lion could convert the .vob files - is there some setting that I have missed?
Any suggestions that preserves a simple workflow much appreciated.

arthur wrote:
Perian is here: Perian - The swiss-army knife of QuickTime® components
Perian will be retired soon.

On Windows 7, neither my quicktime or iTunes will start. This started after I installed the newest update. All the files that are needed are there. I recently updated Quicktime to see if that would work, but it didn't.

This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?

This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?

HT1338 I made a movie in iMovie and want to make copies. I lost the iMovie file, I just need to know how to copy a disk. HELP!

I made a movie in iMovie and want to make copies. I lost the iMovie file, I just need to know how to copy a disk. HELP!

Not sure if you really mean disk (HD) or disc (CD/DVD). Check out this YouTube video

After installing Flash Player, I lost sound on Youtube and other sites. How do I fix it?

After installing Flash Player, I lost sound on Youtube and other sites. How do I fix it? I still have sound on some apps.

To help troubleshoot we'll need the following system information:
Operating   system
Browser
Flash   Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
Thanks,
Chris

Installed OS X Server, lost access to files and programs. Need to regain access but unsure how?

Similar Messages

Maybe you are looking for