Installed RoboHelp 11 for trial and it overwrote Acrobat 9 pro with broken version of Acrobat 11 which I can't uninstall.

The subject says it all. I installed Robohelp 11 to try it. Without my permission, the installation nuked my perfectly functional Acrobat 9.0 Pro and replaced it with a completely broken of Acrobat 11, which I neither wanted nor needed. I went to control panel to get rid of it so I could re-install Acrobat 9 Pro, and Acrobat 11 doesn't even appear as an application that can be uninstalled. Yes, the installation is that broken. So now I can't work with PDFs at all. I am more than happy to uninstall the trial of Robohelp to get back Acrobat, but I'm not even sure that will fix the issue since the installation program seems so squirrely. Anyone else had this problem. If so, how did you resolve it? Thanks for any help anyone can offer!

Thanks for your reply. As I mentioned in my post, when I went to Control Panel to uninstall Acrobat 11.0, it wasn't listed among currently installed apps. However, after going back and looking through the Installed On dates in Control Panel, I realized that for some reason, it's called Adobe PFD Creation Add-on XI, rather than Acrobat 11.0. Interestingly, the program folder name in Windows Explorer still uses Acrobat 11.0.
Fortunately for me, I always have disc versions of my software. So I was able to re-install Acrobat 9.0 once I got rid of Adobe PDF Creation Add-on XI. I really wish that Adobe made clearer what extras they are installing with these trial versions :-(
Thanks again.

Similar Messages

  • Unable to install robohelp plugin for framemaker

    Hi,
    I have FM8 and RoboHelp HTML 9. When I open a new project and try to import a FrameMaker document or book I get the "unable to install robohelp plugin for framemaker" error.
    I tried with FrmaMaker open and closed - same thing.
    With RH7 it used to work.
    Any ideas?
    Thanks,
    Rakefet

    Unsure about the plugin message, but you can import FM into RH9. The problem may be that you have a current RH9, but not a current FM10. Try downloading a trial of FM10, create a v10 copy of your book, and see if that imports.
    Mark's comment applies to linking, but not to importing.
    -Matt
    @mattrsullivan

  • So is it just me, or is Mavericks a bust?  My MBP runs way hotter now. I don't have time for trial and error solutions. Is Apple offering a way to downgrade back to Mountain lion? I want out of Mavericks ASAP.

    So is it just me, or is Mavericks a bust?  My MBP runs much hotter since the upgrade. Why do I need ot sit around watching Activity Monitor, manually controlling my fans, and deleting extensions that I enjoy using. Don't even get me started on the Quicktime/Mov issues. I had none of these issues on Mountian Lion. Searching these forums, I see it's not just me. Why would Apple release a new system w/o peoperly testing it on MBPs?
    I don't have time for trial and error solutions. I've tried the obvious ones. No help. Is Apple offering a way to downgrade back to Mountain lion?  Or better yet, a Mavericks update that adresses these problems? As of now, I want out of Mavericks ASAP.
    My processor is 2.6 GHz Intel Core i7.
    8 GB 1600 MHZ DDR3 memory.
    13inch MBP purchased ust over a year ago- 1-13.

    jonny a wrote:
    Nope, it'a not just me, see above. And yup- I'm backed up, But I don't own a Mountain lion install disc. That's why I was posting here in the first place. Thanks
    Nobody owns a ML install disc - ML was only ever distributed as a download from the Mac App Store.
    If you have a Time Machine backup, you can boot into recovery mode and restore from your Moutain Lion TM backup volume.  If you have a system clone, then you can boot from the clone, and just clone ML back onto your internal drive.
    Going back to your previous installation from a backup should be trivially simply if you have the backup in hand.

  • I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

    I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

    I assume that you have installed new RAM in your MBP.
    It would be helpful if you indicated the EXACT model/year MBP that you have.
    What the the RAM specifications that you are trying to install?
    Ciao.

  • I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie.  Any ideas on how to get around this - how to revert to the previous version.

    I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie.  Any ideas on how to get around this - how to revert to the previous version??

    Look in your Applications folder.  If your system behaved as expected, you should have an iMovie 9.0 folder in your Applications folder.  Apple moved the old version there as even they suspected the new versions was a train wreck.

  • Cannot install latest updates for Bridge and Photoshop CC. Get the following message: Update Failed. The download appears corrupted.  U43M1D207.

    Cannot install latest updates for Bridge and Photoshop CC. I get the following message: "Update Failed. The download appears corrupted.  U43M1D207."
    I have tried to install at different times over three different days with the same result each time. My version of Bridge now no longer shows DNG files except as an icon. The update is supposed to install Camera Raw version 9.

    I had the 204 version of your error using the direct download links proved on this thread solved my problem.. hope you have same success... had to log off/in cloud manager before it showed all apps updated
    https://forums.adobe.com/thread/1825014

  • Aperture keeps crashing. "Check with developer to make sure aperture works with version of mac os x you might need to reinstall the application ..be sure to install any updated for aplication and mac os x"

    "Check with developer to make sure aperture works with version of mac os x you might need to reinstall the application ..be sure to install any updated for aplication and mac os x"
    I updated aperture and os x. Latest versions. I also reinstalled aperture. Still getting the same.  please help

    Process:    
    Aperture [448]
    Path:       
    /Applications/Aperture.app/Contents/MacOS/Aperture
    Identifier: 
    com.apple.Aperture
    Version:    
    3.2.2 (3.2.2)
    Build Info: 
    Aperture-201096000000000~2
    App Item ID:
    408981426
    App External ID: 5333832
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [125]
    Date/Time:  
    2012-02-24 23:05:55.982 +0000
    OS Version: 
    Mac OS X 10.7.3 (11D50b)
    Report Version:  9
    Interval Since Last Report:     
    18654 sec
    Crashes Since Last Report:      
    20
    Per-App Crashes Since Last Report:   20
    Anonymous UUID:                 
    244A3A5D-F483-4E17-AFD2-B35CB6B4EBD4
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
      Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
      Reason: no suitable image found.  Did find:
    /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
    I havnt installed anything for last 10-15 days.
    Aperture library located on hd.
    12 ram  870GB free space

  • I could not install the upgrade for iTunes and Error message said "can't start because MSVCR80.dll is missing" Reinstallling has not helped. Is it Apple's fault?

    I could not install the upgrade for iTunes and Error Message said " Can't start because MSVCR80.dll is missing". Reinstalling has NOT helped. . Is the fault with the Apple iTunes upgrade?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.

  • Is it possible to install an SSD for dv9000 and dv9010ca notbooks?

    Is it possible to install an SSD for dv9000 and dv9010ca notbooks?

    Hi,
    Please read this:
       http://h30434.www3.hp.com/t5/Notebook-Hardware/Hard-Drive-upgrade-on-DV9000/td-p/58108/page/2
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Installing microsoft office for mac and getting prompt for installer password.  i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

    installing microsoft office for mac and getting prompt for installer password.  i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

    You don't use your Apple ID or its password to install anything on your Mac. You use the admin account's name and password.
    Use the name and password you last entered when resetting them. The "name" you use is not the short name of the admin account folder.
    For example. If you create an admin account of John Smith, the short name given to that account's folder will be johnsmith. So when an app requests an admin name and password to install something, the admin name you enter is John Smith, not johnsmith.

  • HT1751 Few days back i bought 8 ringtones from my iphone application for itunes and when yesterday I sync it with itunes all my ringtones washed off. I tried to again download the same ringtones from itunes then it again asked for payment. Why?

    Few days back i bought 8 ringtones from my iphone application for itunes and when yesterday I sync it with itunes all my ringtones washed off. I tried to again download the same ringtones from itunes then it again asked for payment. Why?

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Itunes wont download because I dont have 10.6.8 or greater. But I just installed the snowlion disk thing and my macbook is a 10.6.8 version so how do I get itunes to download?

    Itunes wont download because I dont have 10.6.8 or greater. But I just installed the snowlion disk thing and my macbook is a 10.6.8 version so how do I get itunes to download?

    Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...

  • EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC.  It used to show up on left side and I would slide podcasts right over to it for years,

    EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC.  It used to show up on left side and I would slide podcasts right over to it for years,  I have installed 3x with removing old install.  I also can hear a constant throbbing sound in spkrs. when Itunes turned on, pls advise.

    Hi Becki ..
    You need to "authorize" the Mac.
    Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
    Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
    More details here >  iOS: Syncing with iTunes

  • Enable Reader Rights  for Commenting and Markup in Acrobat X Pro?

    I am sure there is a nice long thread somewhere on this but I cannot find the old "Enable for Commenting and Review" in Acrobat X Pro (Windows 7, 32 bit). I get basic comments (sticky and highlight) but i need to make a PDF where my Reader X users can make all the comments and markups. I also tried doing the Send for Review task and it still did not have all the tools in Reader X.

    File > Save As > Reader Extended PDF > Enable Commenting & Measuring

  • HT201263 my ipod is asking for passcode and its disabled now I cant access it as my computer in which I had synced it is crashed

    I have ipod touch for the last two years.  I had not used it for long time now, since my computer has been changed I can not synce it as its asking for passcode and its disabled now. I had not saved the password.  I also can not format it. Pl help me.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..

Maybe you are looking for

  • I Tunes for WIndows wont start after upgrade to 8.0.1

    I recently upgraded to iTunes 8.0.1.11. After upgrade, if for some reason I need to reboot my computer iTunes will not start. It took forever to finally figure out what it was. I couldn't sync my iPod, could not get on to iTunes , etc. I finally had

  • Problems with pricing in Internet Order screen(CRM E-Commerce 5.0)

    Good afternoon !         We are using CRM 5.0 with CRM E-Commerce 5.0, and we are experiencing problems with pricing in the order screen.         When we create an order and insert one item at this order, this item is processed and the price is calcu

  • Publishing an alternate layout in InDesign CS6

    I've create a 3 page sample file to show a client how they can re-purpose their InDesign print file and use InDesign to create alternate layouts. I've created a test file that has 2 alternate layouts. One is the standard iPad portrait view and the ot

  • Adapter Module to rename a file at FTP

    Hi All I have to write a Adapter module to change the filename of a file which is at the ftp location. How can i do this. Regards Dheeraj Kumar

  • Is there a way make an iWeb site appear on Google?

    With other software I know you need code to do that. I was wondering if iBank had some other way to do it since it doesn't let you add code to websites.