Installed RT2500-Replug and now my Mac runs better than ever?!?!

I've been using a Netopia USB wireless Card to side-step my airport issues for about 2 months now. There is a glitch that causes the USB card not to be detected on start-up so someone recommended I download this http://mitglied.lycos.de/thomsmac/RT2500Replug.html but before I did the problem rectified itself for some reason and the card started being detected.
Today I unplugged the Wireless card and started up airport to see in the airport update fixed anything for me. It didn't so I plugged the USB wireless card back in but unfortunately the detection problem returned. I download and installed RT2500-Replug and was shocked. I have no idea why but my Mac is now running better that it ever has in the 3 months I've had it. Webpages are loading instantly, Google earth is silky smooth. Not only that but applications are launching faster! I've checked my states and for some reason my Macs RAM usage has been cut by one quarter.
Anyone have any idea what might have caused this? The difference is so noticeable its almost worrying. Might I have had some kind of conflict that the downloading RT2500-Replug might have solved?

You're going to have to give us a LOT more details than that!
Specifically which OS did you install? You say "latest version of Leopard", but that was 10.5. 10.6 is "Snow Leopard". Go to the Apple menu, click About This Mac. That tells you the exact OS version. Give us the processor speed that's there, too, and let us know the approximate (or exact, if you have it) age of your Mac.
How much RAM (memory) do you have installed? Again, it's under About This Mac.
How much hard drive space do you have available? Click on the "Macintosh HD" on your desktop, click cmd-i and look for "Capacity" and "Available".
Matt

Similar Messages

I installed framemaker 12 and now can't run acrobat

i downloaded trial version of framemaker 12 and now can't access my acrobat 8

Hello chrisd52733482,
Could you please let me know what version of OS are you using.
Also, tell me what exact error do you face when you try running Acrobat.
Please ensure that you are logged in as administrator and anti-virus is disabled on your machine.
Hope to hear from you.
Regards,
Anubha

Problems Installing Reader X and FlashPlayer on Mac running 10.7.3

Attempted to install both Reader X and Flashplayer on two new Macs, both running 10.7.3. Downloads went without a problem. Unfortunately, installations begin but never complete. No error messages are posted, the installer simply never completes. No antivirus SW installed. Was able to download Reader 9.

Grab the install.log file for Acrobat located at "/var/log/install.log".
Paste the contents in the forum.
I'm guessing but you probably have a perms issue somewhere interfering with the installation.

I cant install itunes updates, and now it wont run, cant install or uninstall software error 2324

I can not install or updates itunes sofeware, have had it loaded for years now I get error 2324, i cant install or uninstall the softward

Hey joegallow17,
Thanks for using Apple Support Communities.
Looks like you are having trouble installing iTunes. If you're having issues installing iTunes, try this article.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

Tried to install yosimete software and now my MAC Pro won't work

Yosimete software won't install

Yes I was upgrading from 10.6 to 10.10.
Says OS X could not be installed on your computer.
File system verify or repair failed.
Quit the installer to restart your computer and try again.
I did all that a couple of times and still won't work.

I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book. I got Norton Internet Security for Mac, and now my Mac is running slow, with way too many spinning beach balls of death. Was it a mistake to install Norton?

I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book. I got Norton Internet Security for Mac, and now my Mac is running slow, with way too many spinning beach balls of death. Was it a mistake to install Norton?

yankeecat wrote:
I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book.
There is no such Trojan or other malware known today that will do that using OS X nor has there ever been one. The most probable explanation is that somebody hacked into your e-mail account on the server, so you should change that password to something stronger right away. If it had come from your Mac then there would almost certainly be copies of those messages in your Sent Mail mailbox.

I recently installed Maverick and now my Mac is running very slow

i recently installed Maverick and now i am running very slow.

Please download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic tool by a regular Apple Support forum user and contributor named Etresoft.
Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and installed software.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.

Just installed snow leopard and office for mac - now my computer is running very slow. Why?

I've recently installed snow leopard and office for mac - now my computer is running very slowly - why?

Which version of office did you install? If its 2008 the early version had some problems and you will want to update the office software to i think it is 12.3.0
If it is 2011 you might want to do the same thing.

I'm using an older mac (2008 iMac). Things were fetting slow and I used a program called DupZapper to get rid of a lot of duplicate files. It worked and my computer is running better. The only problem is now InDesign crashed at startup. I have the ori

I'm using an older mac (2008 iMac). Things were getting slow and I used a program called DupZapper to get rid of a lot of duplicate files. It worked and my computer is running better. The only problem is now InDesign crashes at startup. I have the original disks and serial number (CS3) The error message is "required resources are missing". Same message if I try to uninstall. Any clues as to how to re-install?

reset your preferences and retry launching id: InDesign Help | Setting preferences
if that fails, uninstall (properly with the uninstaller), clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

I installed 4.0 and now firefox will not open, though it is running, I have uninstalled and re-installed and it still will not open?

I installed 4.0 and now firefox will not open, though it is running, I have uninstalled and re-installed and it still will not open. Not sure why this is happening

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

I just finished installing 11.3 and now iTunes will not run.

I just finished installing 11.3 and now iTunes will not run. I have uninstalled itunes and resinstalled several times. Now when I attempt to start iTunes i get the following two error dialogues:“The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll. and was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)

Hi Greybeard1955,
Welcome to the Apple Support Communities! I understand that iTunes is not opening after uninstalling and re-installing it. When iTunes is uninstalled on a Windows computer, all of its components must be removed as well and they must be removed in a specific order. Below is the article for uninstalling on Windows 7. I recommend uninstalling iTunes and all components in order and reinstalling fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
I hope this helps,
-Joe

I have a MacBook Pro 2007 and I installed Mac OS 10.6 but I lost power in the process and now the mac doesn't recognize my hard drive

I have a MacBook Pro 2007 and I installed Mac OS 10.6 but I lost power in the process and now the mac doesn't recognize my hard drive, how can I fix this

I've tried it but since I'm using a USB disk drive it keeps freezing up or showing you a folder blinking folder with a question mark. (?). When I start the mac up I hold the control button until the Mac OS install disk shows up. My hard drive doesn't show up anymore. Is there any other button I have to hold down to bring a different menu up. I have also tried to boot up holding control and C and nothing happens. Thanks for the help so far

I installed IOS 7 and now it won't accept my password. How do i fix it?

I finally got around to installing IOS 7 and now my phone won't accept the 4 digit passcode. I didn't think about disabling that feature before the upgrade. Never had a problem before. And yes, I'm sure I'm using the right code. I use it many times per day! I tried plugging into my computer and itunes but since it isn't unlcocked it won't recognize it. Likewise with iCloud. I tried find my phone and it comes up offline. This is a last ditch effort. I can't even phone a friend! Any workaround?

The security is tighter in iOS7,
When you install it for the first time it asks you a few questions to configure these new settings, and I'm wondering that you may be confusing the new authorization scheme for your old password.
When first running iOS7 after the upgrade it will ask you for (not your iPhone password) but your iCloud/Apple ID password.
Read the questions carefully and make sure that you're not confusing the two as prompted. You may not be, but this is my initial thoughts, as the install does not change any existing passwords but does link the hardware to iCloud to further prevent theft.
-Alan

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

Installed RT2500-Replug and now my Mac runs better than ever?!?!

Similar Messages

Maybe you are looking for