Installed Sharepoint 2010 Server SP2 Update; PSConfig succeeds but CA still shows "Upgrade Available"

I have installed SharePoint 2010 Server SP2.  Central Administration shows the configuration database is at 14.0.7015.1000.  I had to run PSConfig several times before it completed successfully due to missing features, setup files, etc.  But
I got those cleaned up and finally got PSConfig to complete.
However, when I go to Farm Information it still shows "Upgrade Available" for the single WFE server we have. 
When I run stsadm.exe -o localupgradestatus it shows me the following:
[2] content database(s) encountered.
[0] content database(s) still need upgrade or cannot be upgraded.
[23] site collection(s) are contained in the content databases.
[0] site collection(s) still need upgrade.
[53] other objects encountered, [12] of them still need upgrade or cannot be upgraded.
The 12 objects that cannot be upgraded are ancillary databases like:
StateService_[GUID]
Secure_Store_Service_DB_[GUID]
PerformancePoint Service Application_[GUID]
They all show "Cannot Upgrade" for the status.
Am I correct in thinking these are what's keeping the status at Upgrade Available?  And if so how can I resolve?
If not, what else can be done to change that Upgrade Available status?
My goal is to get SP2 and the latest CU applied before trying to reinstall the User Profile Service.
Thank you.

use psconfig via command line:
> PSCONFIG.EXE -cmd upgrade -inplace b2b -wait
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Similar Messages

  • I have just updated Java plugin but it still shows that it needs to be updated

    I have just updated Java(TM) platforn SE 7 U5 10.5.1.255 but it still says that it needs to be updated. Please help me with solving this issue. Thanks

    Hello,
    Please make sure where you are asking to be updated is a legitimate detector.
    To protect against potential Java vulnerabilities, Firefox now asks you to activate Java by default, for each website you visit that uses Java. When you see an "Activate Java" message box, simply click it to load the Java content normally.
    [[Image:Fx24-JavaActivate]]
    If there is no visible area to activate Java content in the page, click the plugin icon in the address bar. In the message panel that opens, choose "Allow Now" to enable Java content temporarily.
    [[Image:Fx24-JavaAllowNow]]
    The next time you visit the site or any other that uses Java you will see this message again. If you want to always activate Java for a particular site, you can use the "Allow and Remember" option shown above.
    For more information about using Java in Firefox, see the articles [[How to allow Java on trusted sites]] and [[Use the Java plugin to view interactive content on websites]].
    '''Important:''' After activating Java, you may see a security prompt, asking you to confirm that you want to run Java, or you may see an "Application Blocked" message, depending on the website and your security settings in the [http://www.java.com/en/download/help/jcp_security.xml#control%20panel Java Control Panel]. These messages come from Java itself, not from Firefox.
    For help with Java security prompts and "Application Blocked" messages, see the Java Help pages [http://www.java.com/en/download/help/appsecuritydialogs.xml What should I do when I see a security prompt from Java?] and [http://www.java.com/en/download/help/java_blocked.xml Why are Java applications blocked by your security settings with the latest Java?]
    Does this solve your problem? Let us know.

  • Prepare sharepoint 2010 with sp2 environment on windows server 2012 R2

    HOw  prepare sharepoint 2010 with sp2 environment how i  install sharepoint 2010 with sp2 in a windows server 2012 
    i mean
    from scratch  i just prepared a windows server 2012 R2 vm
    and i set all required  roels (Appserver,webserver etc) according to this link
    http://social.technet.microsoft.com/wiki/contents/articles/12502.how-to-install-and-configure-windows-server-2012-for-sharepoint-2010.aspx
    and i have sharepoint 2010 set up, and i downloaded sharepoint 2010 sp2
    from this link
    http://www.microsoft.com/en-us/download/details.aspx?id=39672
    now should i install sp2 and install sharepoint 2010 binaries?
    adil

    SharePoint 2010 has no supportability statement for Server 2012 R2.  I would not use it until Microsoft releases a supportability statement.
    Even it  has no supportability for server 2012, but sharepoint 2010 running fine in my server 2012 test environment
    adil
    You indicated you were using 2012 R2.  SharePoint 2010 supports Server 2012 (non-R2) with SP2 media, but has no supportability statement for Server 2012 R2.
    Trevor Seward, MCC
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Just now i am installed latest version of Flash Player but it still showing same message An Error occurred

    i have already posted a question and you send a answer to my mail and them i am updated flash plater but is still showing an error in youtube but in other browsers those liks are working

    Please stick with your original thread
    https://support.mozilla.org/en-US/questions/1009711
    ''locking this one as a duplicate''

  • Issue after applying Cumulative update on SharePoint 2010 Server

    Hi All,
    We got an issue after applying the "SharePoint Server 2010 and Project Server 2010 Cumulative Update Server Hotfix Package (MOSS server-package,
    Project server-package): June 28, 2011" on SharePoint 2010 server.
    Environment details:
    OS: Windows server 2008 R2 with SP1
    TFS: TFS 2010 with SP1
    DB:  SQL Server 2008 R2
    SharePoint: SharePoint 2010 with SP1
    Due to this issue we are not able to proceed further to integrate PS 2010 with TFS 2010. Can someone please suggest solution for this issue.
    Thanks,
    Rajukumar

    Hi Rajukumar,
    At the very first, please refer to the article below for installing CU on Project 2010 server:
    http://technet.microsoft.com/en-us/library/dd239177(v=office.14).aspx#Installation_steps
    I found a blog for this issue:
    http://blogs.msdn.com/b/brismith/archive/2011/07/06/project-server-2010-sp1-and-june-2011-cu-formatexception-when-trying-to-provision-a-pwa-site.aspx
    In addition, I'd recommend you install latest update for your server.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • After SharePoint 2010 MOSS SP2 was applied problem with library preview

    Hi,
    I have recently applied SharePoint 2010 MOSS SP2 from here
    http://support.microsoft.com/kb/2687453/en-us
    After I have installed that service pack, one of my custom made library workflow for a department would not work when they Upload a document. It works if they create new documents from library menu, but not if they Upload a new documents.
    ULS Viewer gives following messages
    MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/Upload.aspx?List=%.......Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list.
    MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/_layouts/UploadEx.aspx?List=%...... Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3) level for this list.
    Some but not all taxonomy values were found, this can lead to the catch all being incorrect. Use TaxonomyField.SetFieldValue to update taxonomy values.
    Also, when I try to use Navigation in Site Settings, and if I want to add new navigation either link or folder, and if I use IE 8 or 9 (32 bit) in the pop up window Navigation Link - web dialog, there is no "OK" button.
    Thank you 

    Hi Eric
    Thank you for helping me.
    I have already came accross this blog and it is now quite the same as my case.
    My navigation works without problem.
    Also, when I open the site in SP Designer, all views of my library show this library in XsltListViewWebPart.
    But this Upload.aspx, is a Form, not a view, and it shows the list in ListFormWebPart.
    Just to remind you, the workflow work fine if the use "New Document" menu from library ribbon. So, I assume something is wrong with Update form.
    This other form UploadEx.aspx, I do not see in SharePoint Designer for this Library.
    I am kind of suspicious that it maybe has something to do with
    http://support.microsoft.com/kb/2872441/en-us
    And am thinking of applying these
    Thank you
    Windows Server 2008 R2 for x64-based Systems Service Pack 1
    Microsoft .NET Framework 4<sup>[1]</sup>
    (2835393)
    Remote Code Execution
    Critical
    2572078 in MS11-078
    Windows Server 2008 R2 for x64-based Systems Service Pack 1
    Microsoft .NET Framework 4<sup>[1]</sup>
    (2840628)
    Elevation of Privilege
    Important
    2656405 in MS12-034

  • Display wikipage(default.aspx) in mobile view sharepoint 2010 foundation sp2

    Recently I deployed a site using sharepoint foundation 2010 sp2.
    The site has anonymous access to entire site. I developed some wiki pages using wikipage library. it's looking fine in desktop ,laptop,ipad,tab's.
    But coming to mobile view the wikipages are not displaying. But I want to show the wiki page's in mobile view also.
    So is there any setting required to set up for that? SP 2010 Foundation SP2

    Hi  ,
    According to your description, my understanding is that you want to display wikipage in mobile view for SharePoint 2010 foundation sp2.
    How about append "?Mobile=1" to the end of the URL of the home page using Internet Explorer? If cannot access, you need to enable the legacy MobileRedirection feature. This feature is enabled with a SharePoint
    Management Shell cmdlet:
    Enable-SPFeature –identity “MobileRedirection” –URL http://Server/SiteURL
    Correspondingly, you can force a mobile device to load a nonmobile page by entering the URL of the nonmobile page and appending "?Mobile=0" to the end of the URL.
    Reference:
    http://msdn.microsoft.com/en-us/library/office/ms462572(v=office.14).aspx
    http://msdn.microsoft.com/en-us/library/office/ms441925(v=office.14).aspx
    http://msdn.microsoft.com/en-us/library/office/ff407400(v=office.14).aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Install sharepoint 2010 on windows 8.1 enterprise

    I would like to install sharepoint server 2010 on windows 8.1 enterprise without Hyper-V as the organization policy does not allow us to user Hyper-V. At the end of the installation while sharepoint configuration wizard is running, it thre a "Configuration
    Failed" exception. Failed to create configuration database as shown below. Kindly help.

    The instructions for installing SharePoint 2010 on Windows 8 are pretty much the same as they were on Windows 7 x64.  You do still need to make sure you create the custom config file to do the install.  You can find a full set of  instructions
    to install on Windows 7 on my blog here:
    http://www.dontpapanic.com/blog/?p=96
    The one additional thing you need to do is make sure that when you install IIS you are using ASP.net 2.0 instead of ASP.Net 4.0.  Windows 8 will default to 4.0.  You can read more about that here:
    http://johnlivingstontech.blogspot.com/2011/09/installing-sharepoint-2010-on-windows-8.html
    I should however point out that although you can install SharePoint 2010 on Windows 8 its not really a supported platform and even on Windows 7 its only supported as a Dev environment.  Its never been supported for any kind of production usage.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • What needs to be done to rebuild a current Sharepoint 2010 Server farm to work as a Sharepoint 2013 Server farm?

    Hello Community
        Currently I have a Sharepoint 2010 Server farm.
        One server contains the database and DNS server
    because it is the the domain controller.
        The other server Contains the Sharepoint 2010 Server software
    and is the the application server where applications such as Metadata,
    UPs, etc, reside (including web applications with sites built with the UI).
        Now I am going to change to Sharepoint 2013 Server because currently
    there is no newer version of Sharepoint available.
        I am ready to rebuild the current Sharepoint 2010 farm configuration into
    a Sharepoint 2013 Server farm from scratch.
        The question  is what do needs to be added and\or changed to make the current
    Sharepoint 2010 Server farm configuration work as a Sharepoint 2013 Server farm?
        Thank you
        Shabeaut

    There is no direct in-place uprade method for SharePoint 2010 to 2013. You need to create a new SharePoint 2013 farm from scratch and attach service and content databases to upgrade them. Check out Upgrade
    to SharePoint 2013 for more information about the process.
    If you have another server, you would install SharePoint 2013 on this. If you don't, you'll need to remove SharePoint 2010 from your existing server and then install SharePoint 2013. Check out Hardware
    and software requirements for SharePoint 2013 before starting to make sure your server meets the minimum requirements for SharePoint 2013:
    Web server or application server in a three-tier farm
    Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundation 2013.
    12 GB memory
    64-bit, 4 processor cores
    80 GB for system drive
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • Do you have to create SPN before you install Sharepoint 2013 Server?

    Hello Community
        After installing WS2012 and Sharepoint 2013 Server on it, I
    created SPN's for the SQL Server and domain user.
        While creating the web application I ran across some information
    that says if you use Kerberos Authentication you have to setup the SPN's
    in AD DS before you install Sharepoint 2013 Server.
        That doesn't make sense to me because it might be possible that
    SPN's may be needed to be created throughout the lifetime of the
    Sharepoint farm which could be forever.
        So the question is, is it true that you can only use Kerberos
    Authentication if you created the SPN's in AD DS first?
        Thank you
        Shabeaut

    You can create it after-the-fact, you just may have access issues until it is created and the user account running the pool is logged off and back on again. Right, it has nothing to do with the installation status of SharePoint.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Able to connect the visual studio 2010 to Remote SharePoint 2010 server?

    Able to connect the visual studio 2010 to Remote SharePoint 2010 server?
    l
    I researched the result value is null,
    They asking to try in another method like
    SharePoint Redistributable,
    SharePoint SDK.
     Any possible ways to connect the remote SharePoint2010 server with the local system.

    hi,
    try to see these links :
    http://platinumdogs.me/2014/01/14/remote-sharepoint-site-connections-not-supported-using-visual-studio-2013-and-host-named-site-collections/
    http://blogs.msdn.com/b/kvosters/archive/2013/03/27/sharepoint-2013-cannot-connect-to-the-targeted-site.aspx
    if you try these and they didn't work so you can't :(
    HOPE IT HELPS

  • EML files sitting in queue folder on SharePoint 2010 server

    Okay, so the incoming email is actually making it to the SharePoint 2010 server.  I actually sent 4 emails from my outlook to the sharepoint site library email.  the emails are inside of the queue folder on the sharepoint server.  Why would
    this be?  and tje emails all satrt off with NTFS_...

    Hello,
    Same here as well. all mails were going to sitting in queue folder prefixed with NTFS_.
    Then I did a telnet {FQDN} 25
    helo {server FQDN} 
    mail from:{your email address} 
    rcpt to:{email address of email enabled library} 
    give 250 success code if everything looks great.
    In my case it gave me 
    501 5.5.4 
    then checked the SMTP Server Domain , was different then changed to correct one it worked fine. 
    Regards
    Yogesh
    YOGESHA H P(MCTS)

  • 2 servers can do "Mirroring" are there 3 servers in Sharepoint 2010 Server mirroring?

    Hello Community
        In providing availability using Sharepoint 2010 Server using "Mirroring"
    you need a "Principal, Mirror and a Witness".
        Logically speaking the principal and mirror I would say are the two servers
    that are involved in Sharepoint 2010 Server availability.
        The question is in a 2 server farm what is the "Witness" in availability,is it a Sharepoint
    2010 Server, is it the Domain Controller or is it a separate server and do you have
    to purchase a copy of Sharepoint 2010 Server to run it on?
        Thank you
        Shabeaut

    For SharePoint web front end servers you use multiple web servers and a load balancing service or device. SharePoint application server will auto load balance.  For database servers you can use database mirroring. The running SQL server is the Primary,
    the backup SQL server is the Mirror and the Witness is any other SQL server.
    Be aware that SQL mirroring is going away in the future:
    http://msdn.microsoft.com/en-us/library/ms190202.aspx
    More on mirroring:
    http://msdn.microsoft.com/en-us/library/ms189852.aspx (click the dropdown on the page for each SQL version.
    Mike Smith TechTrainingNotes.blogspot.com
    Books:
    SharePoint 2007 2010 Customization for the Site Owner,
    SharePoint 2010 Security for the Site Owner

  • We are using SharePoint 2010 server with service pack 1 want to remove/delete old user profiles & site from server

    Hi Team,
    We are using SharePoint 2010 server with service pack 1, we want to remove/delete old user profiles, access & site from server
    is there any script or feature available using that we can only remove dactivated/deleted/old user profiles, access & site.
    Thanks
    NPratik

    Take a look at Metalogix ControlPoint, which will compare user accounts on SharePoint to Active Directory and remove accounts that no longer exist in AD (or are disabled).
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Trying to install FF 4 beta 2 for Maemo 5 on my N900 but it still shows as 1.1.

    Trying to install FF 4 beta 2 for Maemo 5 on my N900 but it still shows as 1.1. Uninstalled, removed all Mozilla repositories, rebooted, sufed back to firefox.com/m/beta and clicked the install link. The N900 switched over to my app manager and re-installed the beta repository then tried to download/install 1.1.
    Has the repository been updated for beta 2?

    There's a problem with the Maemo application manager that causes it to always use the version in the Ovi Store, even if you try to install a newer version from a different source. For a possible solution, see http://talk.maemo.org/showthread.php?t=63508

Maybe you are looking for