Installed Snow Leopard, Had to Re-Install Leopard, Everything Gone

Quickly trying to figure out how to access all my old files that are taking up room on my MBPro hard drive after my down-conversion back to Leopard from Snow Leopard (reason for switch back to Leopard is due to the inability to transfer footage via my MBPro- bc of a Snow Leopard incompatibility).
Essentially, my hard drive is showing that all my pro apps, footage, files, etc. are still taking up space on my hard drive- I just don't know how to access or revive them. I want to avoid formatting/erasing/re-installing all the apps if possible...
More info on request, thanks for any help in advance!
Alex

Quickly trying to figure out how to access all my old files that are taking up room on my MBPro hard drive after my down-conversion back to Leopard from Snow Leopard
The only way to downgrade is to erase the hard drive and reinstall the older system. Did you do this? If so, did you import your files and apps from a backup? If you didn't, they aren't still there. They've been erased. Hopefully you do have a backup?
If you didn't erase, how did you downgrade?
Essentially, my hard drive is showing that all my pro apps, footage, files, etc. are still taking up space on my hard drive
Based on what? Where are you seeing this?

Similar Messages

I just had more ram installed in my 2009 mac mini and now there is no audio at all.

Hi all,
I have a late 2009 Mac Mini which I update to mavericks. This was not a great idea. The performance has been aweful since upgrading. I finally looked into adding RAM. I was told by the Genius at my local store to buy RAM on line and bring it back to the store for install. I had the Ram installed today and I am satisfied that things function much faster now.
The problem now is that the computer does not make any noise. I have speakers plugged into the headphone jack but no noise comes out. When the system boots up, there are no beeps or tones audible. The speakers were all working earlier today when I unplugged everything to take the mini to the store. I also plugged the speakers jack into my phone and they work. I was able to connect a bluetooth speaker and play music through it.
I have tried to reset the PRAM but I"m not sure if I was successful. The instructions I have read for PRAM reset say hold keys until second chime is heard. I heard no chimes at all.
I am a novice when it comes to computers but I am good at following detailed instructions.
Any help would be graetly appreciated!

Yes, this was an Apple retail location.
I made an appiontment thinking that they would sell and install the RAM. When I got there, the genius looked up the specs for my mini and said they did not sell what I needed. He explained that the mini was older and out-dated. He looked up the specs on what RAM i needed and suggested that I purchase it elsewhere and bring it back for them to install. He suggested that I purchase a new computer but I couldn't justify spending $600 or more. I am a very light user and would only be wasting money on a newer set up.
It was when I returned that I was informed (by a different tech) that Apple would not be responsible for any damage that might occur during the replacement.
I decided to proceed anyway thinking that an apple tech was less likely to do damage than I was.
After taking it in the back and swapping the chips, he brought it out, plugged it in and proceeded to open a bunch of Ram hogging apps, graphing software, and internet sites. I was happy to see that the performance was greatly improved and the spinning ball was not dominating the system.
After I hooked it back up at home and tried to play some music, I realized that there was no sound.

My Macbook Pro has just had a new hard drive put in it but i still need to install snow leopard without a disk?

My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
Thanks

You might be in a bind. While is is normal for new Macs that shipped with Lion to omit a system installation DVD, yours was running Snow Leopard. Apple included a system installation CD or DVD for every computer that shipped with every computer through Snow Leopard. Lion was installed on every machine built starting about August 2011, ending the DVD era.
Apparently your computer had been sitting in someone's inventory for a while, but that's no excuse for them to have removed the DVD from its box.
Try booting Lion Internet Recovery. Read this:
http://support.apple.com/kb/HT4718
I suspect Lion Recovery may not work since "your computer's eligibility for Lion will be verified with Apple" and you appear not to have purchased it.
Please let me know what happens when you attempt to boot Lion Recovery.

I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have

I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?

Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open  > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even h

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even had upgraded to the Mavericks . I do not think it's fair to have to pay again and I would like to upgrade my operating system without having to pay again for the same system.

Hi anatuta,
Thanks for visiting Apple Support Communities.
It sounds like you are trying to upgrade your Mac to a newer version of OS X, after completing a fresh install of Snow Leopard.
If you have already purchased and downloaded OS X Lion and Mavericks, you should be able to find these items in the Purchased section of the Mac App Store.
You may find the steps in this article helpful with finding the items:
Mac App Store: Finding your purchased apps - Apple Support
If you do not see the items in the Purchased section, they may be hidden:
Hide and unhide purchases in the Mac App Store - Apple Support
All the best,
Jeremy

I had OS 10.5.8 on my Macbook and couldn't run turbotax 2012 because of that. I purchased Snow leopard on CD and installed it. Now, about my ABOUT this mac says 10.6.8. Now, I can't print to my Lexmark z705. I get an error message.

I had OS 10.5.8 on my Macbook and couldn't run turbotax 2012 because of that. I purchased Snow leopard on CD and installed it. Now, about my ABOUT this mac says OS 10.6.8. Now, I can't print to my Lexmark z705. I get an error message with no explanation.

Unless there are drivers provided by Apple to work with the printer, you're out of luck. The latest drivers provided by Lexmark are for OS X 10.4 Intel. Unfortunately, this can happen when slightly older peripherals and newer software don't mesh.

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy. Can any one help

I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?

Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

Re: Migrating my IPhoto from Time Machine Backup to my just-installed Snow Leopard OSX... the program is there, all my photos are there..... but my photos had all been neatly arranged in folders, and there is absolutely no sign of my folders. What a mer

re: Migrating my IPhoto from Time Machine Backup to my just-installed Snow Leopard OSX... the program is there, all my photos are there..... but my photos had all been neatly arranged in folders, and there is absolutely no sign of my folders. What a mess, 20,000 photos. How can I restore my folders?
(iphoto 08)

Restore the library from Time Machine as shown in this screenshot:
Then open the library with iPhoto. No importing necessary.
OT

Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. Not!

Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. But problem persist.

Hi there ricalimo,
I would recommend taking a look at the troubleshooting steps in the article below. If the issue is location specific, than you may want to save the article so you can perform troubleshooting when you are experiencing trouble.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W.

My Mac is three years old and has crashed about 10 times. I have had to erase and re install Snow Leopard every time,yet it keeps happening.

I have communicated with apple care every time and they keep telling me there is no problem,so why does it keep crashing. I took it in for repair under warrenty and they told me there was nothing wrong with it yet it crashed again two weeks later and has crashed another 5 times since then,I have to erase and re install each time. It has now crashed again , i have re installed snow leopard and all i get is the spinning wheel and nothing loads..Im over it. I have several mac products including two other imacs that are running fine..

Run Apple Hardware Test on your computer, the next time your machine crashes try running disk utility on the hard drive. You shouldn't need to reinstall the OS each time your system crashes, if that the case then you could have a bad hard drive.

I have installed snow leopard 10.6.8 on my macbook, i got a problem that every time i want to save or put something on desktop it, says you dont have permisson why is this, also my dock want stay the same everytime i start up it defaults back?

i have installed snow leopard 10.6.3 on to my macbook which was currently 10.4.11, i wanted to do this so i can run Final Cut Pro 10 which needs 10.6.8 or higher. so i updated the snow leopard to 10.6.8 installed final cut pro ok. the problem i got is else where i cant save on put anything on desktop, it says i dont have permisson, and when i try and click on my documents same again. also i adjusted my dock to smaller added a few applications onto it, but every time i restart the laptop it defaults back why is this?!! so annoying. i had a look at my disk utilites and i have still got 10.4.11 on my Macintosh i can switch too? i installed the snow leopard 10.6.3 on my Data Disk. can anyone help me out why i am getting these problems and what i need to do to solve it?

disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/

Can't erase and install SNow Leopard on old MacBook Pro

I am trying to erase and install Snow Leopard on a MacBook Pro3,1. I boot up with the installation disc, get to pick a language but then a window pops up that says "Mac OS X can't be installed on this computer" and gives me the options to Restore from Backup or Restart.
I had upgraded to a 500GB hard drive on this machine which I used for months, but it is currently running off the hard drive of a new MacBook Pro that got fried. The installation disk I am using is the one I got with that unfortunate machine. Could this be the problem?
Any other suggestions?
Other info: Mac OS X 10.6.1 (108504)
Other History: The machine I am trying to erase and install on recently had its logic board replaced under warranty because of the NVIDIA graphics card issue. I have not found the service centre in South Africa to be very trustworthy, in fact the first time they claimed to have replaced the logic board, the computer (which had been intermittently failing to boot up) immediately started displaying the same problems. Another mac shop said to me that the "new" logic board looked so dusty that it seemed extremely unlikely that it had been replaced a week prior. Anyway, it has ostensibly been replaced again, along with a faulty superdrive.
When it went back to the service centre, they put in the hard drive of another, new, MacBook Pro of mine that got fried in an unrelated incident
Please help! I want to give this machine to an employee but
a) want to make sure it's stable and functioning properly, and
b) want to give it a clean slate with my personal data and settings erased.

You need a retail Snow Leopard installation disk. Available for $29 USD. http://store.apple.com/us/product/MACOS_XSNGL
Once you install it onto the old machine, you can use the setup assistant to migrate your stuff and apps from the other machine.

HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
+Hello Charles,+
+Thank you for contacting HP Total Care.+
+I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
+I appreciate for the opportunity to assist you.+
+*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
+I will be more than happy to assist you when you change the OS.+
+For information on keeping your HP and Compaq products up and running, please visit our Web site+
at:
+http://www.hp.com/go/totalcare+
Sincerely,
Sentinaro
+HP Total Care+
+Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
+For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
+HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

Help! I've spent hours researching this and can't find a solution...
I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
Very Respectfully,
Bobby G.

How to install Snow Leopard on a 2009 Mac Pro which has Mountain Lion?

The 2009 Mac Pro that I just bought has Mountain Lion. For many reasons, I do not want to have Mountain Lion on my machine. I have been using Snow Leopard for years and I like it fine. I have my Snow Leopard install DVDs. I cannot get this machine to accept Snow Leopard, which must be just another undesirable aspect of Mountain Lion, bacause this machine must have shipped with some variant of Leopard/ Snow Leopard to begin with. Here's what happens when I put the Snow Leopard Install DVD in the Superdrive:
1) First, I held down the "C" key at startup to start from a disc. It showed me a window which said "Mac OS X can't be installed on this computer".
2) Then I started it with Mountain Lion and then put in the Snow Leopard DVD. Got a window which said "The disc you inserted was not readable by this computer". It also had 3 buttons to choose from: "Initialize", "Ignore" and "Eject". So I clicked on "Initialize" and Disc Utility opened on the First Aid page. I assume I'm supposed to erase the startup disc, but I thought maybe I should ask the experts here before I do that.
This machine has two 2TB HDDs that the previous owner has configured as a level 1 RAID. If I am to erase the startup disc do I erase both drives of the RAID set? If I'm not supposed to erase the startup drive, what do I need to do to get back to Snow Leopard? Thanks and thanks again!

The built-in checks will keep you from clobbering 10.8 Mountain Lion by Installing Snow Leopard over it (literally, 10.6 Snow Leopard Installer will see a later version in place, and knows it cannot install over a later version). So it says "Mac OS X cannot be installed on this computer..." and leaves off "... "in its current state."
You will need to Install on a 10.6 Snow Leopard-erased drive. Mac OS X Erase function proceeds to install a Partition scheme and a default Volume after erasing, because a truly blank drive is useless for most Users.
When you boot to the Installer DVD, you are running off the DVD, so all Hard Drives are available to be erased if that is your choice. All data on them will be discarded. If you erase one drive in a mirrored RAID set, normally the other drive would survive and the set would be degraded. But a new version of RAID was introduced right AFTER 10.6, and it is likely that 10.6 cannot read that RAID at all under any circumstances.

Installed Snow Leopard, Had to Re-Install Leopard, Everything Gone

Similar Messages

Maybe you are looking for