Installed software updates do not show

Hello Any and All: I just now am getting around to this question- a month ago (OK maybe 7 weeks) I had a warranty replacement of hard drive and the cable that connects it.
Since, the only software updates showing in the log are from the night I got it.
I have run updates- just did some a while ago. I watched the window, it said installing and all that, required the restart....
But they are not in the installed updates log.
Anyone: am I getting the updates do you think? And does it matter? And, any idea why it is doing this (besides the fact it is my computer and it has been from minute one, a total pain, to be as generous as mother teresa.....)??????
I will look for answers in the morning. Thanks.

Hey there Tuttle!! Yeah, I am hanging in... the heat was rough to work in, but a few more fronts and I made it through! I had good check up at the dermatologist, and now will be on a semi-annual check, instead of the quarterly I had been (having been drafted into the M club... but my doc found it tiny, so, Knock wood, I should be cool until the next cell goes wackjob and proliferates...) OUR hurricane was slowest traveller on record around here, but of those beasts, the best specimen to have come by....except on the coast that had it a bit rougher than I did....the eywall scraped the beach like a perfect tangent....
back to topic though: First THANKS for the response!
I went to System profile first, and opened applications.... ( I should have written down all the updates that came in- 6 in first, then the security update)
I recall one being an iPod updater, and one for iPod to phone update [{(how do the batteries do in a music playing phone?)}] and a quicktime update- it said if you have QTpro, you'll need a new key (I delayed that from a few days back, until I had time to read that it was only Pro that would need to pay again...).... I forget the other updates-
Anyway, I find in system pref's no quicktime with a date anywhere near now: but it is 7.0.2 (date 8/31/05- could that have been the one I delayed?)
In the iPod I have an 8/17/05 and an updater with 10/01/05 date.
I see the java plugins made it(2.2.0) dated 10/01/05- ah, the iTunes is there
Oh good,there is updater...and Applet Launcher...java webstart too....
Cool, as far as the profiler goes, it looks like all got put in....
OK, then I went to the apple menu like you said, but before I did "about this mac," I did a software update, and it said I am up to date- so there is some confirmation too... the about says 10.3.9 (as I have not gotten tiger yet... that too would mean a new Qt key... it is a riot of fees in cyberspace..golly!) I had bought iwork and ilife, before tiger -which they offered in a package discount all three together- but not AFTER having bought the other two...bad timing.
So, anyway, Now I go to the last item you taught me to check: Library receipts.
Um, everything at first glance is identical- the orange exterior box with yellow interior.....except:Install log file, and CIA Core Installer Log. The latter of two just mentioned, upon opening seems to be related to my HP printer.
Oh, OK: so is the Installer log file (related to the HP Printer).....
Name of science < i opened GIMP-Print installer package, but it is just a receipt and cannot be opened...
OK, now this has turned into a book, eh? hahahahaha
Do you know of a way to make the system pref's software update show installed updates worK? I suppose I may be able to remember what you just showed me.... Since the last drive and cable (was it the cable all along??) I have been enjoying the computer I thought I had ordered...yehaaa!!- then this.
hahahahaha Compared to before< I can deal I am pretty sure. As long is it is not simply the first of a billin domino's about to go blasting around inside my machine. hahhahaha
So, how have you been? And Thanks for responding...

Similar Messages

  • Software Update is not show in general.... How can i update ios without this?

    Software Update is not show in general.... How can i update ios without this?

    What model iPad and what iOS are you running? The max iOS for the iPad 1 is 5.1.1.
    See
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT1222 Software update option not showing in settings option of my iPad 2

    Software Update option not showing in settings of my iPad 2

    Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg

  • HT1338 Can't quit Safari so that I can install software updates; option not highlighted

    I am trying to install Software update and am unable to Quit Safari; the option is not highlighted?

    Choose Force Quit from the Apple menu and shut it down from there.
    (86076)

  • The software update is not showing in my ipad

    when i go into general settings the icon for software update is not there

    That is only a feature of iOS 5 or later...
    If you have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • HT1338 Software Update does not show 10.8.5 Security Update 2014-002

    I continue to have Mac 10.8.5 updates which do not show in the App Store Software Update.  In the past it was always iTunes which didn't show.  Now it's this security update.  Why would Software Update not show these available updates?  Instead it shows Mavericks and such as available updates, but not the current available security update for my version of OS X.  I'm only aware an update exists because of online forums.  Is this a widespread issue that is affecting everyone on Mt Lion?

    Already tried that.  We set up iClound under a new user account and it did not work. 
    (We tested iCloud Mail with Apple Sr. support yesterday, in a new user account.  It did not work.  Note, iCloud via web access via Safari of course will work, accessible from any computer.  That is not computer-specific.  But iCloud mail would not work on my Mac, nor in the Mail app, even under a new test user account.  This was mentioned briefly in previous post above.)
    Regarding re-installing ML, Apple support have never suggested that.  They have only suggested moving my current data to a new user account, which as I mentioned is not realistic, and now with the new iCloud problem across any new user account, would not solve the problem.
    How do you mean to re-install ML?  Erase the HDD, reinstall ML, then restore from Time Machine? 
    I think Apple has not suggested that so far because they believe the problem is in the current Mac data, user account, and not in the system.  They have told me migrating to a new Mac or even to Mavericks probly would not solve the problem.  But now that it's a systemic issue with iCloud -- my previous issues with Software Update not working and appeared to be user account-specific, and still are – perhaps replacing the system software or upgrading to Mavericks will be worth considering.
    They are currently elevating my case to "engineering."  They will be looking at system data, I believe...
    It's incredibly frustrating.

  • HT4623 Software updates is not showing in my settings?

    My settings does not show the software update tab and I need tp get latest updates. How do I do this?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • How to install software that does not show in add\remove?

    I have a agent that i need to install on all our computers but the program does not show in add\remove when installed correctly.
    It does however have a service that runs and some processes that run.
    Can someone tell me what the best way of installing this is?
    Should I create a collection based of the Service\Process or even based of the file sitting in C:\Program Files.
    I wanted to create a collection of computers that had the software already then create another collection that had all computers with it missing and create a advertisement from this..
    I am just not sure how to do this one when it does not show in add\remove

    Please create the new SCCM query based collection for computers which have required software installed. We can create this collection based on service. 
    For example :Below SCCM query will add the computers which firewall service is in disabled mode.
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_SERVICE on SMS_G_System_SERVICE.ResourceId =
    SMS_R_System.ResourceId where SMS_G_System_SERVICE.Name like "MpsSvc" and SMS_G_System_SERVICE.StartMode like "Disabled" 
    Create another collection for computers which have software not installed and add the below query for the collection. Replace the "CollectionID" with collectionID of first collection.
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where ResourceID not in (select ResourceID from SMS_FullCollectionMembership
    where CollectionID = "CollectionID") 

  • HT4623 my software update does not show up in my iphone 4 so i cant update my iphone how do i fix it

    my iphone is not showing my software updates so i cant update my phone what can i do

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • Software Updates app not showing new updates

    Hi,
    The Software Updates app is not showing new updates. I always get "No Updates Available".  For instance, I run 10.8.3 but 10.8.4 is not showing up. I run iTunes 10.0.2 and when I open it  I get messages asking me to update to newer versions but they are never showing up in the Software Updates app. I played with the Software Updates app preference files but it did not change anything. Any idea on why the Software Updates app is not working properly.
    Thanks

    Read this whole message before doing anything.
    Back up all data. Quit the App Store application if it’s running. Test after each of the following steps until the problem is resolved.
    Step 1
    Triple-click the line below to select it:
    /Library/Updates
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a folder selected. Move the contents of the selected folder to the Trash. You may be prompted for your administrator password.
    Step 2
    Do as in Step 1 with this line:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    If there's no change, quit the App Store and restore the file you moved from your backup, overwriting the one that may have been created in its place. Otherwise, recreate your settings in the Software Update preference pane.
    Step 3
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
    Caches/com.apple.SoftwareUpdate
    Preferences/com.apple.SoftwareUpdate.plist
    Preferences/ByHost/com.apple.SoftwareUpdate.*.plist
    Saved Application State/com.apple.SoftwareUpdate.savedState
    Here, "*" stand for a long string of letters, numbers, and dashes.
    Step 4
    If you still have problems, quit the App Store again.
    Triple-click anywhere in the line below to select it:
    open $TMPDIR../C
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). A folder should open. Inside that folder, there may be a subfolder with the name "com.apple.SoftwareUpdate". If so, delete it. You can then quit Terminal.

  • HT2404 I just clicked on Software Updates; BUT nothing shows what's happening? How come I can't see the updates & time it will take?

    Help!  I just got this Lion, and SO many changes & not necessarily for the better !
    I went to the Apple icon, but  "Software Updates" did not show ... though I had deferred installing some updates ...
    Finally it showed up, I clicked on it, saw the updates to do - BUT when I clicked on install - the "box" that usually shows the updates & how long to install - just disappeared! I can't get to it to see what's next. (I have to leave soon & will turn off the mac)
    What's happening? How come I can't see the updates as they are installed, & how much time it will take?
    How do I know IF they have been installed?  Is this the "new Normal" for Lion? Or is there a glitch in my mac somewhere?
    How about updates you download from Apple (not bought) - they go to Downloads on the Sideboard, but are they installed automatically, & put where they belong too? Is there no more restart, etc.?
    - I just went to Systems Preference, to see the "Installed Software" - shows they were ... but don't I have to restart anymore? Are all updates now automatically placed where they belong?
    Thanks to any who can help
    PS One other question - just checked my "profile" & it has my email addy that's 4 years old... how do I change That?

    software update not working
    https://discussions.apple.com/thread/3967755?start=0&tstart=0

  • 10.6.8 in software updates but not installing

    I am having issues with installing software updates for my iMac.  I had to manually download and install the 10.6.7 update (I chose the combo) from the apple site. It shows that the update is downloaded in my software updates but it will not install before or after restart.  I was successul at installing the 10.6.7 combo, but now I am having the same issue with 10.6.8.  I did download the update combo from the apple website, but when I try to install, I get an error stating "The installation failed. The installer could not install the software because there was no software found to install."  I am a newer (1-2 years) mac user so I'm having issues finding solutions.
    Thanks in advance.

    appologize in advance if I have posted this in the wrong place ... I am a newbie

  • Why Software Updater does not install some updates automatically?

    QuestionWhy Software Updater does not install some updates automatically?
    AnswerSoftware Updater only installs security-related updates automatically. Non-security-related updates, and service packs installation are required to be initiated manually via the Software updates tab under the Policy Manager Console.
    In Policy Manager 12, a checkbox Show non-security-related updates has been introduced under the Policy Manager Console > Software tab. Unchecking the checkbox hides the following update types:
    Microsoft security tools
    Non-security updates
    Service packs
    Note: This checkbox is Policy Manager Console-specific setting. If you change the setting in one Policy Manager Console, it would not affect another Policy Manager Console connected to the same Policy Manager Server.

    amrok90 wrote:
    Updater does not detects 5800. I've reinstalled everything as it's stated (as, according to FAQ, sometimes the drivers may get corrupt). Restarted the PC. Nothing happened. 
    Presumably FOTA not an option for your 5800XM?
    Happy to have helped forum with a Support Ratio = 42.5

  • Itunes won't install-"Apple Software Updates Can Not Be Removed"

    Cutting right to the problem. I currently have quicktine 6.5 installed and working. iTunes was completely removed. When doing search, nothing shows up. In Add & Remove Programs, however, iTunes is still listed (37 megs). How do I get rid of it so I can re-install. When I try to install, I get message "Apple Software Updates Can Not Be Removed, Contact Administrator". When I try to upgrade Quicktime to 7.1, I get "An Older Version Of Quicktime Can Not Be Removed". I would like to completely remove all traces of itunes and then try to reinstall.
    generic   Windows XP  

    okay.
    download and install the Windows Installer CleanUp utility. use it to remove the Installation configuration information for iTunes, Apple Software Update, and QuickTime:
    Description of the Windows Installer CleanUp Utility
    now use the following document as a guide to a manual removal of any leftover itunes and quicktime program files:
    Removing iTunes and QuickTime for Windows
    reboot the PC and try another itunes install. does it go through properly this time?

  • HT4623 I am trying to install iOS 5.1 on my iPad, but when I go to 'Settings' and then to 'General' the link 'Software update' is not visible. Any advice welcome.

    I am trying to install iOs 5.1 on myiPad but when I go to 'General' to 'Settings' the link 'Software update' is not visible. Any advice would be welcome.

    This feature is only available on iOS 5 or later.  You must still be running iOS 4.  Connect your iPad to the computer you usually sync with and run iTunes software update.

Maybe you are looking for

  • ISO: solution for these itunes vs windows vista home premium problems?

    1.Every time I start itunes, it tells me that there are registry entries missing for burning a disk and something else that escapes my immediate memory. However, it suggests reinstalling itunes and I've done that many times without the problem going

  • Hard Drive Format Query

    I have just purchased a second hand hard drive and have a query about it. First of all I went into the disk utility and formatted it as Mac OS Extended but I still get the following below: Mount Point :          /Volumes/2tb G Drive          Capacity

  • IPhone 4S cannot be synced. An unknown error occurred (-54).

    iTunes is up to date and running current version 12.1.1.4. Have never had an issue syncing my iPhone 4S until today. The message I get is that my iPhone...."cannot be synced. An unknown error occurred (-54). Any ideas? So far, I've tried it a couple

  • Calling webservice from Flex?

    Hi, I get the error when I call webservice from Flex.Can you tell me why this happen? Thanks Mark [RPC Fault faultString="Security error accessing url" faultCode="Channel.Security.Error" faultDetail="Destination: DefaultHTTP"] at mx.rpc::AbstractInvo

  • Tutorial do ALV Tree programming

    Hai all, I really want to create ABAP program using ALV tree, but i dunno how to use the ALV tree. Is someone have the tutorial have to do that one. or maybe sample code how to do ALV tree. Thnks in advance.