Installed SSD in T500... Intel Matrix driver?

I replaced my 7200RPM drive with a OCZ Vertex 2 180GB unit. All the System Update drivers installed fine, but the Intel Matrix Storage Manager driver for WIndows 64bit will not install. I only have one drive in the system, do I need this package? I read that the latest version is named Intel Rapid Storage Technology.
It's not the greatest SSD, but it's making my life easier at the moment. I'm setting up backups to a network appliance just in case it experiences a random failure. Here are the winsat numbers:
C:\Users\xxx.YYY>winsat disk
Windows System Assessment Tool
> Running: Feature Enumeration ''
> Run Time 00:00:00.00
> Running: Storage Assessment '-seq -read -n 0'
> Run Time 00:00:07.41
> Running: Storage Assessment '-ran -read -n 0'
> Run Time 00:00:00.51
> Running: Storage Assessment '-scen 2009 -drive C:'
> Run Time 00:00:53.85
> Running: Storage Assessment '-seq -write -drive C:'
> Run Time 00:00:05.05
> Running: Storage Assessment '-flush -drive C: -seq'
> Run Time 00:00:01.53
> Running: Storage Assessment '-flush -drive C: -ran'
> Run Time 00:00:02.25
> Running: Storage Assessment '-hybrid -ran -read -n 0 -ransize 4096'
NV Cache not present.
> Run Time 00:00:00.00
> Running: Storage Assessment '-hybrid -ran -read -n 0 -ransize 16384'
NV Cache not present.
> Run Time 00:00:00.02
> Disk  Sequential 64.0 Read                   223.69 MB/s          7.4
> Disk  Random 16.0 Read                       159.41 MB/s          7.5
> Responsiveness: Average IO Rate              1.19 ms/IO          7.8
> Responsiveness: Grouped IOs                  9.01 units          7.3
> Responsiveness: Long IOs                     3.01 units          7.9
> Responsiveness: Overall                      27.12 units          7.6
> Responsiveness: PenaltyFactor                0.0
> Disk  Sequential 64.0 Write                  254.03 MB/s          7.5
> Average Read Time with Sequential Writes     1.287 ms          7.4
> Latency: 95th Percentile                     2.393 ms          7.4
> Latency: Maximum                             92.561 ms          7.7
> Average Read Time with Random Writes         1.134 ms          7.9
> Total Run Time 00:01:11.54
C:\Users\xxx.YYY>
Jim

To be honest, I don't see what it actually does. Windows 7 seems to driver the SATA stuff fine out of the box. I don't have it installed at the moment; I uninstalled it trying to diagnose a 30 second shutdown delay involving FLTMGR.SYS according to the shutdown trace. It seemed to start around the installation of the RST drivers (although it's install fine before), and is still there.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

  • Kit for installing SSD in place of DVD Drive on DV6-6011TX

    Can anyone please let me that whether it is possible to replace DVD drive on my DV6-6011TX with an SSD Drive (+kit to install it)?
    Any help will be greatly appreciated.
    Thank you and regards,
    Babur
    This question was solved.
    View Solution.

    Yes it is possible but the interface for the optical drive is likely not as fast as the hard drive SATA connections because it does not need to be. You would be far better off to install the SSD as the main drive and put a standard mechanical spinner drive in the optical drive adapter for storage purposes. Putting an SSD in there is a bit of a waste.
    Your optical drive is 12.7 mm thick so you need this adapter:
    https://www.jacobsparts.com/items/HDDBAY-01/
    if this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Installed SSD and 8GB ram, Now Drive wont read Cds

    I have a late 09 15" Macbook Pro.  Today I installed an OWC Mercury Extreme Pro SSD and 8gb of Crucial ram, I also disabled SMS and made it so the drives wouldnt go to sleep.  Everything works REALLY fast and great except for some reason now when I put a CD in, the computer thinks its blank.  Dvds work fine.
    Any ideas?  Maybe I bumped the connector on the drive? 

    I booted off of my old drive just to see if its a SSD issue.  It does the exact same thing booting form the original hard drive.  Also I took the optical drive out and gave it a visual, double checked the connections too.  I also tried to reenable SMS and that didnt make any difference.  It all seems OK, but it still doesnt like CDs.
    Seems odd that my drive would stop working at the exact same time that I change to an SSD.

  • I can't install Intel graphics driver for HP Pavilion G6 2240SH under Windows 8.1

    HI!
    I installed Windows 8.1 Update 1 x64 to my HP Pavilion G6 2240SH laptop. I started install the drivers and I got an error message in the Intel High-Definition setup: "This computer does not meet the minimum requirements for installing the software."
    Intel HD driver version: 10.18.10.3277
    Can anybody help me to solve this problem?
    Thanks,
    Spatrik
    This question was solved.
    View Solution.

    Hello Spatrik, 
    I have read your post on how your notebook computer is displaying an error message that your updated driver does not meet your system requirements, and I would be happy to assist you!
    The first step I recommend is to remove the Intel graphics driver, as well as removing the chipset drivers from Programs and Features. These chipset drivers will be named Intel Chipset Installation Utility and Driver, and Intel Management Engine Interface (MEI) Driver. Once the drivers are removed, please restart your computer.
    When the computer powers back on, please download and install the following drivers:
    Intel Chipset Installation Utility and Driver
    Intel Management Engine Interface (MEI) Driver
    Intel High-Definition (HD) Graphics Driver 
    Once these drivers are re-installed, please follow this document on Using HP Support Assistant (Windows 8). This should help in updating your computer's Intel drivers.   
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Network Controller & Intel Chipset Driver not installing

    Hello, I have 15 r203tx laptop. I have recently formatted my system and installed all the drivers. But NETWORK CONTROLLER driver and INTEL CHIPSET driver is not installing. INTEL CHIPSET driver is saying "please plug the device : device not found". NETWORK CONTROLLER hardware : "driver not found". WINDOWS 8.1 64-BIT Help me with some solution  

    Hi .  Welcome to the HP Forums! It is a wonderful  place to find answers and information! 
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More  When I looked at the specifications for your notebook, I noted it came with FreeDOS 2.0.HP 15-r203TX Notebook PC Product Specifications  I see you have formatted the drive and installed Windows 8.1. You have installed drivers but the Intel  chipset drive produced the error saying "saying "please plug the device : device not found", and no driver was located for the network adapter. Where did you acquire your drivers from? As you are unable to access the network from your notebook I suggest you try to download and save the driver files  from the official HP page,to USB stick or CD/DVD to be able to install them. Here is  link to the HP Notebook - 15-r203tx   page, follow the links to display the drivers.  To say thanks for replying please click the thumbs up button below. If this resolved your difficulty, please let other people know by choosing solution provided.  Good Luck!

  • E9250t with Intel Matrix RAID1 (2x 1TB seagate) gives repeated disk failures

    I have a new (November 2009) e9250t Win7 64 bit desktop which shipped with one 1TB Seagate drive.  That machine couldn't be factory configured with RAID1 2 x 1TB, but I confirmed with HP Tech Support that it should work ok, so I purchased an identical Seagate 1TB drvie (ST31000528AS, aka 7200-12), installed it, and used Intel Matrix Storage Manager (IMSM)  to create a RAID1 set.  All went fine.
    However, within a few days the 2nd drive was marked as failed by IMSM.  I simply did a right-click on the drive in IMSM and selected "Mark as normal".  It then proceeded to rebuild the RAID1 mirror, and all seemed fine for quite a few days.
    However, over the next month I had at least four more failures - in one case both drives "failed" and the machine crashed back to the prompt "Reboot and Select Proper Boot device, or Insert Boot Media in Selected Boot Drive and press a key".  Each time I recovered by unfailing the drives and the RAID set was rebuilt.  Finally, on January 2nd, I got another single-disk "failure" and finally replaced that drive with a brand new 1TB Seagate.  While the RAID set was being rebuilt, the other drive also "failed" (back to the reboot prompt), and at that point I couldn't recover a bootable system.  The original drive at this point failed bios diagnostics with a "BIOHD-2" error.
    I read aboutthe firmware issues discussed on this forum on older Seagate drives earlier in 2009.  The factory installed 1TB Seagate had firmware HP34, which appears to be much later than the firmware upgrade proposed on that earlier thread.  I don't recall the firmware on the drives I purchased, but I believe they were something like CC45 or similar.  IMSM is version 8.9.0.1023, which is the latest from what I can tell.
    At this point I had a dead machine.  HP Tech Support was pretty useless, but they did agree to replace the 1TB Seagate drive since it now failed even the bios diagnostics.  Curiously, their replacement drive was a 7200-11.  Maybe old stock or maybe that is more reliable?
    I decided instead to try another brand of drives altogether, so I purchased two 1TB Wetern Digital Caviar Black drives (WD1001FALS).  I installed one drive, reinstalled via the recovery DVDs, reinstalled all the apps, reinstalled my backups (yes, I'm paranoid - RAID1 and backups), and then I installed the second drive, created the RAID1 set using IMSM and finally I had a working system again.
    However, within 4 days, one of the new WD drives was marked "failed" again.  Arggghhh!!!!
    At that point I broke the RAID1 set, and confirmed that both individual drives were bootable and worked fine without RAID.  I decided to abandon IMSM and RAID altogether.  I've been running with a single 1TB WD non-RAID drive since then, without problems.
    Obviously I've wasted a lot of time and had a very unreliable RAID experience.  This feature was meant to increase reliability and save me time in case of an (unlikely) disk failure.
    So my conclusion is that Intel Matrix Storage Manager RAID1 with 1TB drives isn't reliable.  Perhaps it's a hardware problem, but it's certainly not a disk drive problem (multiple drives and multiple brands), nor a SATA cable problem (drives on both ports and cables were "failed" by IMSM), and I'm confident the AC power supply is solid (I log AC voltage, frequency and THD, plus the PC runs off a small UPS), and the system has been 100% reliable with a single non-RAID disk.
    Has anyone else had such a woeful experience as me with IMSM and RAID1?

    Further searching shows this has been reported by many people as a problem with IMSM 8.9.0.1023.
        http://communities.intel.com/thread/5036
    (Subject is: Random drive fails with new Matrix Storage Manager 8.9)
    This thread has almost 1000 posts, and is now locked.  It reports that the lastest IMSM version 9.5 might fix the problem.  People also report that downgrading to 8.8 or 8.7 fixes the problem too.
    There is also this thread:
        http://communities.intel.com/thread/4432
    Conclusion: IMSM 8.9.0.1023 is buggy.  Do not use it.  It's very disappointing that HP is promoting this feature when it was widely known since July that it doesn't work reliably.

  • Can't install Intel Matrix Storage Driver on Vista 64 bit P-35 NEO-2 FR

    I downloaded the Intel Matrix Storage Manager File to support E-SATA drivers. In the notes section it states "NOTE 1: If the system is running Windows* 64-bit version,
            the Intel(R) Matrix Storage Manager driver supporting
            64-bit should be used."
    How do I install the Intel Matrix Storage Manager Driver for my P-35 so my board will dectect E-sata connections? It's telling me that the installation can't continue becuase my computer does not meet the minimum requirements. This cannot be.
    Here's the link for the file I downloaded from MSI for Intel Matrix Storage Manager Driver
    http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1261

    Quote
    then blue screened.
    This is a Windows Problem.  The generic SATA AHCI Drivers that come with Vista are pretty much crab and don't always work (that is why you get a bluescren, usually with a 0x0000007b stop error).
    The cleanest way to solve the problem is to reinstall Windows Vista with AHCI Mode enabled in BIOS and integrate the Intel ICH9R SATA AHCI Drivers in Vista Setup.  Another way is to try a repair installation after you have enabled the AHCI Mode (doesn't always work).  A third way is to force Windows to use the Intel Drivers via a registry patch.  I am not sure how well that will work with Vista.  The procedure for XP is described here:
    https://forum-en.msi.com/index.php?topic=106575.0
    You may wanna give it a try.

  • Need help with XP instal. stuck at: Intel Matrix Storage Manager Driver

    I've bought a new 2.0 ghz laptop with vista blah blah but i want to change to XP.
    I've
    bought a new copy of XP and am ready to go then first issue was during
    installation the screen says can't find harddrive installed.
    I
    then found some thread somewhere which i've lost that said to buy an
    external floppy drive and downloaded that floppy driver thingy that i
    need to get past that stage from the toshiba website..
    FYI driver name: SA200 ACHI F6-1017-XP
    That
    worked fine.. when it said press F8 if you agree to install XP i nearly
    wet myself.. anyhow after it formatted the drive it then asked me this:
    Insert the disk labeled:
    *Intel Matrix Storage Manager Driver*
    into drive A:
    * Press ENTER when ready
    WTF are you talking about laptop? can someone please help me past this stage?
    :-( :-( i only want XP installed.
    So far its been like 3 weeks since i've been trying to install it
    Message was edited by: IamMILOS

    Here are detailed instructions I found earlier:
    Installing a Retail (street copy) version of Windows XP on a Vista Toshiba Laptop.
    - If the Toshiba laptop has a seperate BIOS for XP and Vista, download and flash the XP BIOS over the Vista BIOS.
    - If XP Setup does not detect the SATA Hard Disk, simply turn on "SATA Compatibility Mode" in the BIOS if applicable. If this option is not available, follow these steps:
    1) Download the Windows XP SATA F6 driver from the Toshiba Support/Downloads Website.
    If an individual F6 driver is not available, download and unzip the Intel Matrix Storage Manager driver. The Intel Matrix Storage Manager driver package should contain some folders under the "F6flpy" folder. For example: ICH7M_32bit for an ICH7 based chipset when installing Windows XP 32bit.
    2) Copy the F6 driver files (iastor.inf, etc..) to a blank floppy disk. The actual files must reside in the root directory of the Floppy Disk. For example, A:\iastor.inf, A:\iaahci.inf, etc..
    3) Use a Toshiba USB Floppy Drive with the Toshiba notebook. (some non-Toshiba USB Floppy Drives may not function properly during XP setup)
    4) Boot from Windows XP CD-ROM, start the installation and ensure the floppy disk is inserted in the USB Floppy Drive.
    5) When XP Setup prompts you to press F6 to install a Storage Driver, immediately press F6.
    6) When XP Setup prompts you to select a SATA driver, select the appropriate driver and continue. For example: ICH7M Intel(R) 82801GBM SATA AHCI Controller, ICH8M Intel(R) 82801HEM/HBM SATA AHCI Controller
    7) Keep the Floppy Drive attached and Floppy Disk inserted until XP has completed its installation. Do not Partition or Format the Hard Disk during XP Setup. The SATA drivers from the Floppy Disk are copied and stored on the Hard Disk during XP installation.

  • T520 with Optimus - Can't install Intel Graphics Driver in XP

    Hello,
    I have T520 with Optimus FHD screen.
    I have XP installed in my Ultrabay HDD.
    I understand that XP doesn't support Optimus and that I must go to BIOS and choose either Discrete or Integrated.
    OPTION 1 (Discrete Only)  Which someone what works:
    - So, when I have Discrete enabled in BIOS - and installed Nvidia Drivers in XP - everything works fine, expcept on 90% initial boot ups after going from Win 7 to XP (F12 Options) -  I assume the NVIDIA driver doesn't get initially recognised and the XP boots up in non native resolution.
    - It's only after I restart again and use (F12 again) to pick Ultrabay with XP, the Nvidia gets properly loaded. But this time, there is a prolong delay (60 to 90 seconds) of black screen after the WIndows XP Welcome screen before the desktop appears.
    OPTION 2 (Intgrated Display Only) - Of couse, this after uninstalling NVIDIA Graphic Driver in XP
    - In BIOS, Integrated Graphic in choosen.
    - XP boots up in basic resolution.
    - I download (From Lenovo T520 Driver Page) - Intel Integrated Driver for Win XP 32.
    - When I try to install it, it says "The computer doesn't meet the minimum requirements for installing the software"
    - BTW, I do have all the WIndows Updates including NET 3.0 and higher
    - So then, I try to forcibly installed through Device Manager and Having DISK  - but I get Error message.
    - But somehow, it works after.
    One guess I have and that confuses me is the Otimus Graphic Card - where maybe it can only work with either Optimus Drivers in Windows 7 or Nvidia Drivers in Windows XP. And that the Integrated Intel HD Graphic Drivers in for XP on Lenovo website are only meant for T520 with Intel Graphics ??!!
    Or can optimus be used with intergrated intel drivers only in the XP?
    If anyone can shed a small light, I would be grateful.
    Thanks You
    Solved!
    Go to Solution.

    Glad to know everything is working for you.
    You shouldn't need the discrete to watch flash videos, the Intel integrated should be able to handle that on its own.
    The nVidia card shouldn't be running at all when the machine is in integrated . In fact it doesn't even run in Optimus except when it is actively being used. nVidia proved this when it was first demoing the technology. nVidia removed the nVidia chip from the motherboard of an active system that was running in Optimus using only the integrated graphics, and the computer kept running without issue and the power consumption was the same with and without the chip on the board.
    If you really wanted FireFox to always run with the nVidia card (again, I don't know why you would want this) you can change the settings in the nVidia control panel to force FireFox to run with discrete.
    When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
    My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

  • Installing the Intel ME Driver

    When I load the MSI Control Center it displays a pop-up telling me to install the Intel ME driver for overclocking.
    3 QUESTIONS:
         1. Where is the Intel ME driver?
         2. If I get it as a download from Intel, how do I know which ME to download?
         3  If the ME driver is on the MSI Drivers and Utilities Disk, then which file is it and how do I install it?
    I know this is basic, but I'm just a simple man.
    P.S.  
    OCZ has been having problems with their firmware software for the Agility 3.   I got rid of mucho problems by removing the OCZ Agility 3 SSD and replacing it with a Crucial RealSSD 300.
    Not as fast, but it does not give me BSODs either.

    if you talk about the Intel Management Engine , they are on your driver DVD or on the MSI web site
    http://www.msi.com/product/mb/Z68MA-ED55--B3-.html#/?div=Driver&os=Win7%2032

  • Need help installing Intel Lan Driver on a Satellite A100-011

    I have bought Toshiba Satellite A100-011 notebook with Windows Vista. Now I downgraded the os to Windows XP. The problem is how to install Intel Lan Driver. I would really appreciate any help, because there is no .exe file and I have no idea, what to do with those files.

    Hi buddy,
    the files which are in the zip file are really the drivers but you have to install them manually which means you must go to the device manager, search for the LAN device which probably should have a exclamation mark and then right-click on it. After clicking a wizard should appear which leads you trough the installation process. When the wizard asks for drivers (if not already automatically found) then point on the folder where the driver files are located.
    Then everything should be fine. :)
    Greetings

  • I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

    I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

    Hold down the option key and select
     ▹ System Information...
    from the menu bar. In the window that opens, select
    Hardware ▹ USB
    from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

  • Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

    Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

    Install iTunes.
    Once install, hold SHIFT and launch iTunes.
    When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive.

  • I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive.  I am having trouble with permissions in viewing my old hard drive.  What is the best way to get complete access to my old hd installed in my new Macbook?

    I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again .  What is the best way to get complete access to my old hd installed in my new Macbook?

    Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.

  • Can I switch out a hard drive for an SSD without having to clone the existing hard drive, and then install Yosemite from an USB Boot Drive onto the new SSD?

    Can I simply replace a hard drive with a new SSD and just install Yosemite from a USB boot drive onto the SSD? I recently bought a used MBP and it has absolutely no files on it except for the OS, and so I'm assuming I don't need to clone the current hard drive as I can just reinstall the OS onto the new SSD.

    Honey_Revenge wrote:
    Thanks.
    Just a quick follow up question, is formatting the SSD with HFS+ done in Disk Utility?...
    It's possible that the SSD will be set up for use on a PC, which means it will have a Master Boot Record partition table rather than a GUID Partition Table, which is what Yosemite needs. In Disk Utility, select the SSD and click the Partition button. Create a new Partition Layout and click the Options... button at the bottom. You'll likely see MBR is selected. Choose GUID instead and Mac OS Extended (Journaled) for the Format.

Maybe you are looking for

  • Firming of the schedule lines

    Hi, in MD04 we can see the firm indicator for some of the schedule lines. We aware of that this indicator is set based on the firm zone period and the schedule release date. Apart from firm zone is there any other parameter makes the schedule line fi

  • Jexport CDF issue with Calc Manager

    I have JEXPORT function which works fine as a essbase calc script.But when I try to validate in Calc Manager using EPMA Hyperion 11.1.1.3 ,It gives error 'Error:Unable to resolve UDA,attribute member or dimension member with value,name or type "" rul

  • SharePoint Services 2.0 Obsolete?

    We are still using TFS 2008.  That server is running Microsoft Windows SharePoint Services 2.0 SP3 which I'm told is now obsolete.  Is that version still supported and - if not - what recommendations can you provide regarding an update without breaki

  • Can you print password protected pdfs from an ipad?

    can you print password protected pdfs from an ipad?

  • Exporting Access Connections profile / Import to Windows Wireless

    Hi All. I have an issue which i really hope someone have a solution for as either googling and searching through 53 pages on this forum has not provided me with an answer. Here goes... The hospital on which i'm working are about to change their IT-in