Installed successfully, but the opd component failed in visual studio

The environment is xp with sp2 and visual studio 2005 team suit. The odp is the newest "ODTwithODAC10202",
the install process just passed without any error. but when i ran the visual studio, the oracle component "oracle explorer" turned out to be a gray label and a error message came out saying "package 'oracle developer tools for visual studio' has failed to load properly (GUID=....)".
why this happened, did anyone encounter this before?
Looking foward a help

Hello,
Here is an "announcement" from the ODT forum that might be helpful:
http://forums.oracle.com/forums/ann.jspa?annID=258
Good luck,
Mark

Similar Messages

After a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!

after a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign Please Help!

J3liu1 I would recommend reviewing the installation log files for the specific error message which you are facing. You can find details on how to locate an interpret your installation log files at Troubleshoot installation with install logs | CS3, CS4. You are welcome to post any specific errors you discover to this discussion.

HT3986 i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.

I just purchased the latest iPhoto to update my 7.1.5.I have run the Library upgrade tool 2x, each saying installed successfully.But, each time I try to open iPhoto, I get the msg,"To open this version of iPhoto,the library needs to be prepared"OSX 10.9.3

I just purchased the latest iPhoto to update my 7.1.5.I have run the Library upgrade tool 2x, each saying installed successfully.But, each time I try to open iPhoto, I get the msg,"To open this version of iPhoto,the library needs to be prepared"OSX 10.9.3

each saying installed successfully
It looks like you installed the Library Upgrader, but did not run it. It is installed in "Applications > Utilities". Launch this tool and click the "Choose Library" button to direct it to your iPhoto library.

Error '"Shockwave Flash", but the plug-in failed to load successfully

Hi, some help please. I'm not very technical on macs so I need somebody to help with as much detail as possible. I use the browser Safari 1.3.2 but it will no longer display flash content, instead I get the lego box with a question mark in it and the error message '...“Shockwave Flash”, but the plug-in failed to load successfully'. I've checked some discussion threads but they are beyond my realm of comprehension - I am but a simple man in need of help. Please help. Please. Somebody...

Hi neonhook,
First of all, Welcome to the  Discussion forums!
"I am but a simple man in need of help."
Trust me, there are a lot of us around here like that
If possible, I would suggest using a different browser such as Camino 1.6.4 or even Firefox 2.0.0.x (but keep in mind that Firefox 2.0.0.x will only be supported fully using 10.3.9 until mid-December 2008 and Firefox 3.0 is for OS 10.4 and above only.
Both Camino and Firefox can be customized to look and feel a lot like Safari and have many features that Safari 1.3.2 does not. I use Camino and find it faster and with no crashes due to flash web content etc. You'll be able to use sites such as Google Maps again, etc.
Safari for 10.3.9 is no longer being supported and to use a newer version of Safari you would need to upgrade your OS to at least 10.4 and above.
hope that helps some and post back with comments and questions,
littleshoulders
PS. Please post back if any of the above information is too confusing as I do understand it can be.

I tried to install bridge, but the download / install failed, no error code just contact support

I tried to install bridge, but the download / install failed, no error code just contact support

Nobody can tell you anything without proper system info or other technical details.
Mylenium

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Installed successfully but network is not connected. Yet when I go on my Mac network is connected. Is there any other way to solve this problem? Please help.

Hi,
I have just installed Windows 7 Home Premium on my Mac book Pro 13inch, it installed successfully but there is no network connection. Yet when I go on my Mac I can get online no problem. Please help or what other way I can do to connect windows online?

Did you download Windows Support Software when you started installing windows via Bootcamp. If yes you need to then install the Support Software after installing windows which contains Windows drivers for Mac hardware.

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing.

How do i stop photoshop cs4 from quitting unexpectedly when saving a photoshop pdf? i attempted to download the adobe drive 5 but the installation keeps failing. I went through the process of clicking through the how to's and the troubleshooting and came to the conclusion that I need to install the adobe drive 5 but I can not complete the installation. I may be incorrect on this so I need immediate assistance as I have poster and ad deadlines. I also tried disabling the gatekeeper and solution 3 on the troubleshooting of slow saving on photoshop.
Any help is much appreciated!
Thank you!

Are you attempting to save the file to a network location instead of your local hard drive? If so, this is probably why you are encountering an issue and why Adobe Drive would be the solution. As we've documented, it is a bad idea to open from or save directly to a network source: Networks, removable media | Photoshop | CS4 and later. Drive can help you get around this by setting up an Adobe supported virtual connection to the network. Thus, if installing Adobe Drive is the solution you need and your need help with installing Drive, please post to the Downloading, Installing, Setting Up forum.
If you are not saving to a network location, then Adobe Drive is not going to be the answer. Then we'll need to know more about the file you are saving.

Adobe flash player download and states its install successfully but its not there

I have mozilla firefox 3.6.11
Windows 7
toshiba laptop
i have downlad adobe flash player 10.1 i think it was
it was installed successfully so the computer says but it just bring me back to the screen to download and it is not on my computer.

The current version of Adobe Flash player (version 10.1 r85) is installed on your system. Under Tools > Add-ons > Plugins it is shown as "Shockwave Flash". That name was chosen by Adobe and causes confusion for some.
'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
*'''Note: plugin check page does not have information on all plugin versions'''
'''''"...but it just bring me back to the screen to download and it is not on my computer."'''''
Although you should not need to, have you tried exiting and restarting Firefox after the installation?

ORACLE 11G XE INSTALLED SUCCESSFULLY BUT NOT DISPLAYING IN BROWSER

WINDOWS 7, GOOGLE CHROME, ORACLE 11G XE IS INSTALLING SUCCESSFULLY BUT WHEN I START IT IN THE BROWSER IT IS NOT DISPLAYING IN THE BOTTOM IT IS SHOWING WAITING FOR 127.0.0.1.....
WHEN I GO TO RUN SQL COMMAND LINE AND WRITE CONNECT AND GIVE USER NAME AND PASSWORD IT IS SHOWING CONNECTED

Welcome to the forums - there is no need to SHOUT.
Pl identify the version of Windows 7, along with whether it is 32-bit or 64-bit. Do you meet all of the software requirements in the Install Guide ? http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm
Have you completed all of the steps in the guide ? If so, did the steps complete without any errors ?
HTH
Srini

Supporting objects was not installed successfully from the APEX 3.2 to 4.1

Hi, gurus:
greetings! I have a question regarding migrating application from 3.2 to 4.1. I need to migrate an application in a APEX 3.2 workspace to a new workspace of APEX 4.1. I exported the application from the APEX 3.2 workspace and imported it again to workspace of APEX 4.1, everything works fine except supporting objects was not installed successfully, and the application cannot show images. Could anyone give me a hint to find the cause and solution?
Thanks a lot!
Sam

Hi, Tony:
Nice to see you again! :) It proved out that was due to the wrong file format, I should choose UNIX file format to export my application from APEX 3.2 workspace instead of choosing DOS file format to export. Though I am still confused, Why this does matter? I used to export and import with random file type, as long as I keep consistency of file type for export and import, it never give me trouble like this.
I got the following error message
The following prerequisite checks failed. Installation of this application's supporting objects cannot continue until these issues are resolved.
To continue installation after addressing the errors, navigate to the Supporting Object Definitions of this application and click INSTALL in the Supporting Objects Installation section.
Alternatively, you can deinstall the application definition and reinstall after resolving these issues.
Object Names: EBA_CUST_ACTIVITY_TYPES, EBA_CUST_ADMINISTRATORS, EBA_CUST_ASSOCIATIONS, EBA_CUST_CATEGORIES, EBA_CUST_CONTACTS, EBA_CUST_CONTACT_TYPES, EBA_CUST_CUSTOMERS, EBA_CUST_CUST_ACTIVITY, EBA_CUST_LINKS, EBA_CUST_STATUS, EBA_CUST_VIEWS_LOG, EBA_CUST
Sam
Edited by: lxiscas on Dec 11, 2012 7:06 AM

I have been using a free trial of photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

I have been using a free trial of Photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

Hi dmomoney24 ,
Kindly refer : CC desktop lists applications as "Up to Date" when not installed.
Please revert if the problem persists.
Thanks,
Atul Saini

I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

It's very simple. If you want to use iPhoto, just let it manage things as it does. Other than that: Export from iPhoto and delete the image from iPhoto. That will remove the master and all versions.
If space is an issue... use an external disk.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Regards
TD

HT1349 hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

Hi,just now i open it with finder and it started downloading!!!
Thank you,very new to mac:)

Installed successfully, but the opd component failed in visual studio

Similar Messages

Maybe you are looking for