Installed trial, inst Dreamweaver, system crash, now can't load program

I'm trying to test drive the Creative Cloud service, and I was able to download and install the Application manager and Dreamweaver CS6. After playing with it last night, I went to bed. Woke up to find my PC crashed to blue screen. Rebooted, ended up needing to do a restore, and now when I open the Application Manager it shows DW installed, but it is NOT on my computer at all. Can't start it, can't search for it, and I can't uninstall or re-install it via the manager. I would very much like to keep playing with the program for the full 30 days before I decide to drop this kind of money!
Help, pretty please?

It is likely that the option was removed to uninstall the software when System restore was run. I would recommend running the CS Clean Tool to remove your current installations. You can find directions on how to obtain and use the tool at CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

Similar Messages

Help! shake crashed, now can't load script it was running

I was in the process of adding a luma key when shake crashed, now can't load the script it was running. It just appears blank, but the file size hasn't changed. Console error is the name of the file +: "unknown variable Primattev22", and "can not convert type int to image". Tried to recover script, and tried the auto save versions, but didn't work. I saved about 5 minutes before the crash, but I can't get it back. Everything else opens fine.

In addition to trying the "Add Script" trick, you should also try opening the script command-line:
shake yourscriptname
...sometimes that works too.
btw - the error message should have more info - specifically the node which is having the problem:
error: test.shk, line 36: unknown variable Primattev22
LumaKey1 = LumaKey(Primattev22, 0, 1, 0, 0, 0);
^
error: test.shk, line 36: cannot convert type int to image
LumaKey1 = LumaKey(Primattev22, 0, 1, 0, 0, 0);
^
Once you know which nodes are missing their input, you can go in & find out whether the problem is a bad name in the missing node, a completely missing node or a bad name in the downstream nodes.
In your case, it is a little suspicious that the missing node is named "Primattev22" since "Primatte_v22" would be the default name for the second Primatte you load into a script. Maybe you just need to redirect the complaining node to "Primatte_v22"
(first verify that the script contains a node named "Primatte_v22")
That process would be easy...just change:
LumaKey1 = LumaKey(Primattev22, 0, 1, 0, 0, 0);
to
LumaKey1 = LumaKey(Primatte_v22, 0, 1, 0, 0, 0);
(make a backup copy of your script before you do any editing).
Good luck,
-G

I made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft helps in stop freezing?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?

Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better.

If I purchase Photoshop CC now can I load it to a new computer later? I will be purchasing a new computer Later.

If I purchase Photoshop CC now can I load it to a new computer later? I will be purchasing a new computer later. What's the process of moving product to new computer.

You can install new machines as needed. Your subscription allows for functioning installations on two machines, so you could keep the original installation as a backup if you could use one. Otherwise, you can sign out of the old machine to discontinue the use of it there. You will install on the new machine just like you do for the current one.

I just bought PSE 11. Serial No. accepted but Error appears, preventing me to install. What is wrong OR, how can I get program installed? I've tried at least four times!! Jim H.

I just bought PSE 11. Serial No. accepted but Error appears, preventing me to install. What is wrong OR, how can I get program installed? I've tried at least four times!! Jim H.

Use the instructions here to completely remove/uinstall all iTunes/Apple software and componenets and then start from scratch.
http://support.apple.com/kb/HT1923
B-rock

System Crashed & I Can't Reboot

I was replaced my boot drive earlier today and was installing software when the system suddenly experienced a fatal crash (the "Gray Screen of Death"). It gave me the prompt "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." Now, every time I try to boot, this is all I get. Also, I can't seem to get it to boot in either Safe Mode or from the DVD.
Here's the play-by-play: I had formatted the drive and installed the OS. Next, I installed my apps (FCP 7, CS 5.5). I have the nVidia Quadro FX 4800 card installed to run Adobe's Mercury Engine and had just begun to install the nVidia drivers when I experienced the first crash. I've tried force-crashing and re-powering many times, to no avail. I even put the old drive back in, and THAT drive crashed (it worked before the installation of the new drive but was beginning to slowly fail - hence the replacement). As of this time, I've tried pretty much everything I can think of including pulling the power plug for up to 5 min., the attempting to restart, pulling all the memory & re-seating it, swapping out the hard drives and trying the drives in different slots - NOTHING is working.
Any ideas? I mean, I'm not really invested in the new drive at this time - I have everything cloned to an external fw drive. But I need to be able to see something in order to get the system up & running...
Thanks,
Tim Walton
Dual 3 ghz Quad-Core Intel Xeon Mac Pro
8gb/OSX 10.6

I'm not sure of the state of support for FX4800 so I'd say hop over to Nvidia forum, and there is a specific order of updates you need to follow, such as with 10.6.8.

3G Ipod caused System Crash - now my MS Office 2008 doesn't work properly

I, in retrospect foolishly, plugged in a 3G iPod that I don't own. It beeped about 4-5 time and then the system crashed (you know that one that brings up that overlay and you must restart the computer?). I had been running Entourage, Word, Excel, iTunes and Firefox.
I then went to start up my work again and the MS Office programmes kept crashing. Apparently the MS Office database was damaged. I tried to repair it according to instruction but it didn't work.
I did a permissions check and repair. I also checked for damaged files. This indicated that Adobe CS3 Device Central was damaged, System Sync (MS), My Day and Google Updater (coincidental?) were all damaged.
I have completely removed all Adobe and MS Office files (hunting them down with spotlight), un-installing where possible with MS Office and Adobe software and Appzapper.
I removed all the other files that were damaged then re-installed the software (MS Office without Entourage and Adobe PS and Illustrator).
I rechecked for damaged files and still Device Central was damaged and MS Office is being a pain in the butt. Word takes forever to open, save and close. Excel is as bad and copying cells stalls the programme.
My impression is that there is something still in the system that is messing up MS Office and Adobe. Could it all have originated from the system crash and the crappy iPod?
Can anyone tell me what I can do, files to delete... ANYTHING! I have re-installed Office several times with no improvement.
Thanks to you bright sparks in advance.

HI Phil,
"you know that one that brings up that overlay and you must restart the computer?"
You are describing what's known as a kernel panic. Go here for help resolving this issue:
Resolving Kernel Panics X Lab
Carolyn

I have a problem with Apple store when installing large application: The system crashes. Any suggestion?

I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

System crash now Motion becomes unresponsive on startup

Had a system crash with the dark screen forcing me to hold the power button to shut it down. Now I have reopened Motion and as soon as its started up and I go to the toolbar (File Edit etc....) the program hangs. I have tried getting round this by just double clicking on a saved project to open it and instead it hangs on the Motion startup screen.
Any ideas?

Just left a project opening and unresponsive without realising and then saw it open in the background behind safari a full 15 minutes after I clicked open - Its a very small project file with 3 text boxes and gradient background and an image so it's not due to it being a complicated sequence.

System crash - now external drive problem

Hi,
I recenlty bought a Maxtor OnetouchIII firewire external drive because my disk was getting full. I transfered a lot of files to it and freed about 70gb of space. Shortly afterward I started to get a system crash on start-up - with the grey box saying I need to re-start. This would not go away so I ran a the system check cd (OK) then re-booted from a back-up drive I keep. This seemed to fix the problem and the system worked again when I switched back to it. Then the problem happened again and rebooting from the back-up did not work.
I had to reinstall 10.3 then update again to 10.3.9, which I had before. Everything seems fine now apart from one annoying problem - I cannot drag files from the Maxtor drive onto Apps, which I could do before. They will only open from within apps.
Does anyone know how to solve this trivial but very annoying problem?? Also - is it possible the drive caused my crash, or is it a coincidence?
Thanks for any help.
Theo

I figured it out.

Tried to upgrade to new itunes and now can't load itunes or quicktime

HELP! i tried to upgrade my itunes. This upgrade was totally successful. I then had another problem on my computer so i tried to restore my computer to an earlier timepoint. Since I have done this, I can't load itunes or quicktime. I have tried to uninstall the programs and reinstall them but it still doesn't work. I get an error message on quicktime:
failed to initialize- error-2095
The itunes error message reads :
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
Help- I am going insane with this!!!

I followed a link and somehow ended up at this post from Mike Hogan3 and combined it with something else I came across. This is what worked for me!
1)Follow his suggestions for removing quicktime and itunes (at the end of this message).
2)Then reinstall iTunes from:
http://www.apple.com/itunes/download/
3) Then install QuickTime Standalone Installer from this page (located in the middle right of the page- don't install the one with iTunes!) http://www.apple.com/quicktime/download/win.html
Hope this works! It did for me!
Posts: 15
Registered: Sep 26, 2005
RE: QuickTime Installation FAILED!! "Error Code: -1"
Posted: Nov 6, 2005 8:51 AM in response to: Adrian Koo Reply Email
This might not be exactly the same problem but lots of people (myself included) had problems after installing iTunes 6.0. I did the following and it finally installed correctly.
I went to
http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
and downloaded the Cleanup utility near the bottom of that page. When it installs on your machine it will scan your computer for every installer every ran on you're machine. Only select iTunes and Qtime and delete those 2 installers. Then I went to add/remove programs and removed iTunes and Qtime. Prior to this Qtime would not unistall but now it did. Funny thing was there was no prompting by windows once I hit "remove/repair" in the "add/remove programs" function.
Then rerun the iTunes 6.0.1 update. That had been failing to install Qtime prior to this but now it installed and I see all my music again and iTunes works. Let me know if this does the trick, I hope so.

[SOLVED] System Crashes When Trying To Load Nestopia Through Wine

Every time I try to open nestopia or project64 my system crashes. It doesn't crash all the way I get auto logged back in. Not sure if it is the new wine or x or what. I have an nvidia graphics card. Has anyone else had this problem or know a fix? Thanks in advance for any advice.
Update: Problem resolved itself. The only thing that I can think of that I did were some pacman updates.
Update: Nope it was compiz the whole time. Disabled compiz and it works fine.
Last edited by dodo3773 (2011-05-04 19:28:43)

The Microsoft error report says: Error caused by a device driver. Unknown driver.

Installed 10.4.7 - crashed - now can't log in

I had to resinatall 10.3 from original bundled disks. 10.3 installed ok but now I have a log-in screen in which nothing works. I know my log-in and password but it doesn't accept it. I never use the log-in screen normally.
Anyone?
Is there a clever sudo command that will help me reset login name and password - or something else that will depickle this mess?

Try booting off of your DVD that came with your mac (put it in, press and hold C) Once in, under one of the menu's there is an option to reset password. I think it's under the tools menu.

Started with dock crash, now can't log in

This might be a little disjointed because I'm copying my 3 posts from another forum because I didn't get any answers.....
I installed Yosemite on my early 2013 iMac yesterday and have mostly been unable to use my account since the install.
The first clue that something was wrong was that it took literally 4 minutes to log on to my account. I would type in my password and it would spin and sit there until 4 minutes later when it let me in (I timed it).
Then the first time, my dock was flashing for awhile then went away (I do not have it hidden) and everything was painfully slow. Once I finally got my console open I could see the dock was crashing approximately every 40 second. There were some other error messages but they all seemed related to the dock.
I first tried to repair disk permissions but that was so slow it wasn't even useful. I tried it last night, then let it run overnight and when I got up it had fixed maybe 10 items (all related to the printer) and said I had 11 hours left.
I went to my library/preferences and deleted the dock.plist, then rebooted but that didn't have any effect.
But it only seems to be my account. I am now logged on to the guest account and everything seems to be working. I ran the repair disk permissions and it took 2 minutes, found a few things and fixed them.
I'm not sure how I can copy the error messages or access them from the guest account in order to paste them here. If I tried to post this message from my account the lag is so bad that it would literally take me at least 45 minutes just to open Safari, open the console, and post a message.
Well now I can't even log on anymore. Tried booting into safe mode to see if it still crashed. Rebooted, had the red "safe mode" on the top right of screen, but unable to log on. Put in my password and it sat there with the spinning rainbow for 15 minutes. Rebooted to get out of safe mode, tried to log on but same thing. I gave it 30 minutes then rebooted again. Now trying to log in to guest account but it's not letting me do that either. No clue what to do next.
I do have time machine set up on an external drive but not sure if the last backup was from Yosemite or Mavericks. But I don't even know how to get to it. Unfortunately I've only been on Macs for a year so all I really know is Windows.
And for what it's worth, I did buy the 3 year AppleCare Plus for it so it's still under warranty. I'm about to chuck it out the window then take it to the Apple Store. Ok, not really but this is frustrating.......I don't have time for this
This just keeps getting worse. I've done a nvram reset, no change. I was able to log in to my daughter's account so I deleted some programs that I never use and updated MS Office just for the fun of it. I also created another admin account in case I could simply switch accounts but now I'm not sure.
After doing all the changes I could think of in my daughter's account I rebooted the computer. And......now I can't get back in to hers either. The rainbow spins and it freezes (the clock in the top right never changes so I assume it's frozen).
So what seems to be happening is that I'm allowed to use accounts once, then something happens and I can't get back in. I've used my account, the guest account, and my daughter's, and now all of them freeze the computer.
Any advice would be greatly appreciated.

And in case ther is no solution, I do have a question. I do have a Time Machine backup that I can restore that will put be back to Mavericks. But if I do this, what will I lose? I'm pretty sure I had it set up to backup everything (but no way to check) but I got a little paranoid when it said that restore will erase the disk so make sure I have my files backed up. That's kind of what I thought Time Machine was supposed to do!
Then after I restore, should I wait for 10.10.1 to come out? I don't want to find myself in the same boat but I don't even know what to look for to troubleshoot this.

After system crash itunes can't find my music

my system had to have windows re-installed due to a variety of problems. now i can't fin over 20GB of music. i have it on my iPod, but i can't see it on my computer. any suggestions?

hi Daniel!
we can get the music back from your ipod, but first let's try to see if we can find the music on your PC first. this resource might be useful:
Buegie, "Please help!!! Have lost all my tunes..." #1, 04:53pm Oct 26, 2005 CDT
love, b

Installed trial, inst Dreamweaver, system crash, now can't load program

Similar Messages

Maybe you are looking for