Installed update 1.1 - IPOD HAS NOW DIED COMPLETELY HELP!!!!!!!!!!!!!!!

I just plugged in my ipod calssic 80Gb to update a few things, and it told me there was a new software update, 1.1. I cicked install, seemed to be taking a while so I went away, came back 5 minutes later to find the ipod had disappeared from itunes (which still works fine), and the ipod screen was black. I now cannot get anything out of it at all, it is dead. It does not respond to the 5 r's, nor when I plug it in to the computer or even to a power socket. It is DEAD. What has happened?!?! I've only had it 3 weeks, and it worked perfectly before. Only thing I can think of is the screensaver came on before I came back to my PC
Anyone help?!?! I am not happy
Thaks a lot

I had the exact same experience last night. I helped my son install the 1.1 update. He came to me when his iPod didn't come back at all. When it wouldn't respond to the 5 r's, he was completely in tears.
After reading a few posts on this message board, I decided to completely unplug it from ANY source of power and let it sit. I could hear a high-pitched sound when I placed it up to my ear, which made me think it was still "on," even though the screen was completely blank.
A few minutes ago, he came running downstairs with his iPod, telling me that it had "lit up!" We were getting the "connect to power" message. We plugged it in to a wall charger and voila! We got the apple logo, we got the status bar for the 1.1 update, we watched the update complete and the once dead iPod is up and running again.
Somehow, it gets in a state that nothing works, but it's still running. When it finally runs out of battery completely, it seems to reset itself. I know it takes some patience and this shouldn't happen. But at least we didn't have to drive 45 minutes to a Genius Bar or wait for the iPod to be shipped back and forth to Apple.
Good luck!
Mr. Me

Similar Messages

  • HT201412 I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help

    I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help

    iOS: Unable to update or restore
    Read the article  Put it in recovery mode

  • HT1459 I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now.  thanks itunes; it was working fine until i did the update you said i needed.  what do i do now??????

    I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now.  thanks itunes; it was working fine until i did the update you said i needed.  what do i do now??????

    No one here said anything about an update or your device needing it.
    FYI, you are not addressing Apple here, we are all users like yourself.
    If the device is in recovery mode, the only option is to restore it.  All data on the device is gone.  This should not be an issue if the device has been used as designed and regularly synced/backed up.

  • I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?

    I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else.  How can I get the app to function again?
    This happened after I tried to get Readdledocs to open an epub file which I created in Calibre.

    This is a followup to my own posting above.
    Thanks to Dave Sawyer for posting information about re-downloading an app which has been deleted.  I deleted the app from iTunes.  Then, when I synched, iTunes asked me if I wanted the items on my ipod touch copied back into iTunes.  I said yes and then synched.
    Readdledocs is now working again.  It is no longer frozen.  However, I have learned my lesson.  I will download only pdf's from now on.  I don't think it works so well with epub files.  The text reflow feature of Readdledocs is exactly what I need to use for my work documents on my ipod touch.

  • I was trying to update/restore my ipod and now i plug it in and it stays frozen on  the usb to itunes picture. and when i plug it in it dosnt come up in itunes how do i fix this?

    i was trying to update/restore my ipod and now i plug it in and it stays frozen on  the usb to itunes picture. and when i plug it in it dosnt come up in itunes how do i fix this? any suggestions are appreciated

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • The software update on my Mac has frozen it completely

    The software update on my Mac has frozen it completely at the grey screen. I have tried everything to exit it and nothing is working! Help please!!! I've tried alt command esc, forcing the computer to shut off then restart, letting the power drain, nothing. I can't get the computer to even give me the beach ball of doom, it's this grey circle of perpetual nothing.

    Hello Heatherb90,
    It sounds like you are unable to boot your computer after a recent software update. I would use the following troubleshooting from the article named:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Disconnect, test peripheral devices and network cables
    Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
    Disconnect any Ethernet cables.
    Start up your Mac.
    If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
    Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
    If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
    If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
    Start with this troubleshooting and work your way down the article as needed.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I bought and legally own PS CS3. Installed on a desktop and the machine died completely. Downloaded a trial of CS3 from Adobe site. Went to activate and said too many activations. Activate over the phone. EXCEPT Adobe does not handle activation issues ove

    I bought and legally own PS CS3. Installed on a desktop and the machine died completely. Downloaded a trial of CS3 from Adobe site. Went to activate and said too many activations. Activate over the phone. EXCEPT Adobe does not handle activation issues over the phone. Adobe doesn't care about their older products - they don't care that I spent hundreds of dollars for CS3. This is truly disgusting corporate behavior. Is there anything I can do? We aren't all rich photographers. I paid a great deal of money for this product. Is it now useless?Thank you,
    James Scott

    HI James please contact the Adobe Chat Team for activation issue
    kindly do the mentioned steps as follow in order to get hold of chat rep of adobe
    Go to www.adobe.com/getsupport
    select the product as adobe creative suite - then select the issue as adobe id and sign in - and then click on still need help contact us then you will be able to find chat option and they will help you with the chat issue

  • My new iPod has now crashed and is unusable after updating it. Don't update. I just lost the only good thing I have because of them pushing me into it.

    My new iPod has been updated. I was pushed into it. So then I thought "it could use one it could improve it". I read as much as the terms and conditions as I could read that was understandable. And now it's been less then two days and my iPod is now practically useless. Don't update your iPod. It was the only good thing I had. I pleded and pleded to my parents for weeks and save up for weeks to get one. And now it's not even a year old and I've lost it. I can't afford to get a new one. And I can't afford to loose this one. i worked hard every day all day For months to be able to even get a quarter of what i needed. And my parents agreed to pay for the rest and it was my Christmas present. i was extremely happy. It's the best thing that I have and I've lost it because of an update Apple pushed me into. Now they won't help me.
    my iPod is freezing every 5-10 minutes for long periods of time. It is:
    freezing
    the keyboard board is lacking severely
    lags through out ipod
    i cannot play games as it lags then freezes.
    my screen is pressing where I don't press it.
    it becomes very excruciatingly slow
    I Cannot write to fast or it freezes and i have to re start
    Im not getting told when I have notifications (such as emails)
    i cannot use facebook, games, Safari. Email, messenger and a few others with out my iPod crashing.
    i Cannot use the iPod properly at all.
    it can take up to 10 minutes for my camera to work. It usually takes 1 minute or more.
    the camera freezes or wont take a photo when I press
    it freezes on panorama or worn take panoramas.
    it has trouble even trying to get the lock screen up.
    and best of all of it. I can never tell when I'm going to be screwed by Apple.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Picked up older powermac G4 from a garage sale. Can not do any updates because owner, that has now moved did not wipe it clean and I need a password to do anything. Is there a way to restore to factory default and make myself admin?

    Recently purchased older powermac G4 at a garage sale. Unable to do anything because owner, that has now moved, did not wipe it clean and everything I try to do requires his password. Is there a way to restore to factory default, make myself admin and reset password? Hoping this purchase wasnt a complete waste of my time and money.

    Here's the instructions if you have the discs.
    Mac OS X: Changing or resetting an account password
    http://support.apple.com/kb/HT1274?viewlocale=en_US
    Changing your administrator password
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh655.html
    Here's one method to reset the password without the install disc:
    1. boot computer and hold the "apple" key and the "s" key.
    2. wait for terminal show
    3. release keys
    4. type without the quotes: "/sbin/mount -uaw"
    5. press enter
    6. type without the quotes: "rm /var/db/.applesetupdone
    7. press enter
    8. type without the quotes: "reboot"
    9. press enter
    This will let you create a new admin account when you reboot your computer.
    Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
    http://www.macobserver.com/tip/2003/06/16.1.shtml
    Here is a way to get around not knowing the admin password on Macs.
    To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
       1. Reboot
       2. Hold apple + s down after you hear the chime.
       3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
              * mount -uw /
              * rm /var/db/.AppleSetupDone
              * shutdown -h now
       4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
    Not sure is this will work on a Mac running OS 9.
     Cheers, Tom

  • I installed updates, Force Quit itunes and now iTunes will not launch

    I installed updates on my Mac.  In order to complete the process, a window telling me to Force Quit itunes came up.  I did so and now iTunes will not launch??
    Help!
    Cathy 214

    Try deleting all your music by going into settings>general>usage>music. Then re-download them from iTunes by going in to iTunes on your iPhone>more>purchased>music.

  • Timemachine doesn't show external drive (that has now died)

    Hi, I've had timemachine backing up my HD and two external firewire drives (one with my 11gb iphoto library on it).
    If I open the timemachine generated Backups.backupdb folder in the finder, the contents of the 3 drives are all there in separate folders. Fine.
    One of the external drives has just died, so I want to restore my iphoto library (i.e. move it from timemachine to the other external drive).
    But when I enter timemachine, the dead drive doesn't show up.
    If I try to copy the file I want to restore via the finder, it says it will take 450 hours!
    What can I do?

    Do NOT copy the folder via the Finder.
    See #E3 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.

  • Pixelated icon Mountain Lion. Update 10.8.3 has solved nothing. Help please Apple!

    Like many others, I have tried for months to eliminate the pixelated icons that appear at random when using Mountain Lion. Problem is more acute when using external disks and partitions. Have read and tried every bit of information, I could find on the net. Complete failure.
    Moreover Update 10.8.3 has solved nothing....
    The problem has been in existence since Snow Leopard and has become worse and worse and is well documented. Type «pixelated icons, orr blurry icons, or fuzzy icons» in th Google search window, and you will have a measure of the extent of the problem..
    Apple obviously is perfectly aware of this situation. Using Mountain Lion is a pain...
    As a conclusion I beg Apple to do something, and put its best programmers at work on this problem!
    Gil
    User of Macs since 1984...

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Try installing the combo update. It sometimes fixes problems.
    10.8.3 Combo Update
    Information - this article was written for Snow Leopard, but it looks like the information would apply to Mountain Lion.
    http://reviews.cnet.com/8301-13727_7-10402811-263.html?tag=mncol;title

  • After installing update IOS I've lost my Quicken data, help?

    I've lost my quicken data, after installing update....How do I retrieve?

    gloria280 wrote:
    I've lost my quicken data, after installing update....How do I retrieve?
    What Mac do you have?  What version of Quicken do you have?
    Are you updating Quicken or OS X?  What are the details of that update (prior version number and updated version number).
    Also, since this is your first post to this forum, be sure to understand that the first reply is not necessarily the last word on the subject (nor even the first word, as in this case)!

  • Installing Itunes from CD,  Ipod has been formatting for 36 hours?

    Recieved Ipod as gift pre loaded, am installing Itunes from CD recieved in box. Was asked to format ipod, clicked format button, message appears 'waiting for ipod' progress bar is active and hard drive light is flashing. Have now been waiting 36 hours. Is this normal? The ipod says do not disconnect, I am anxious not to lose my pre loaded music.

    Im not sure how you get an iPod pre loaded with music, unless the person who gave to to you has a gift preloaded it, but when you formatted/restored the iPod that wiped the iPOd clean. its not normal to be waiting that long. more on restoring can be found here http://docs.info.apple.com/article.html?artnum=60983
    It depends on what type of iPod this is but if its a current one like a nano or 5G (Video) iPOd, it will have to be connected to your PC using a USB 2,0 port or a "High Speed" usb port (USB 2.0 has afew different names may be slightly different name in the UK compared to here in the US where I am).
    You will have to manually eject the iPod using the "Safly remove" feature in windows with iTunes closed if its open. this shows up as a lil icon with a green arrow in the bottom right corner of windows.
    After that you will disable any antivirus programs that may be interfering with the iPod and iTunes during its first setup on your PC. Download the latest iPod updater here install it and then run it with the iPod connected to restore the iPod and update the software on it http://www.apple.com/ipod/download/

  • I updated software on ipod and now games wont open please help!!!

    i just updated my ipod to the latest software and now when i got to any game it wont open can anyone help me fix this pleaseeeeee

    Try here:
    iOS: Troubleshooting applications purchased from the App Store
    - Game Center games only
    - Do other purchased apps work?
    - Do apps that came with the iPod work?
    - Have you tried a reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try downloading/installing a new app.
    - Do the apps really open by very quickly close?

Maybe you are looking for

  • Different colored screen on start up

    Recently when I open my computer, the screen comes up in different colors of light blue, green, yellow and a few others. It looks sort of like a tie-die shirt. The first time it lasted about 5 seconds, the second time about 20 seconds and the third t

  • Encoding Video for DVD?

    I want to make a DVD that will play in home players, though I do not need to make a menu using DVD SP. Is there a way to encode video straight from FCP into a file that will play in a DVD player? Thanks.

  • Why is my itunes disabled

    Why is my itunes account disabled? I corrected my payment information.

  • How to get physical file path from logical file path

    Hi there is a immediate requirement , I have logical file path but I need to get physical file path from it. So is there any FM which providesthis functionality. Points will be rewarded. Thanks

  • Function module to find out dependent requirements

    Hello Experts, Any function module to determine the dependent requirements for process order... Pls let me know. Regards.