Installed Vista 64 however boot camp drivers dont work - Help

I have a Macbook Aluminum with 4 gb ram.
I just installed vista 64 bit however - i can get Boot camp drivers to run.
Please help someone.

Mac OS X 10.5.4 DVD BootCamp included drivers
http://support.apple.com/kb/HT1999
Limited list of Macs that officially support 64-bit Vista
http://support.apple.com/kb/HT1846
What does happen when you insert your Leopard/OEM 10.5.x DVD?

Similar Messages

Has ANYONE managed to install Vista under Boot Camp on a second drive?

As I understand it Vista cannot be installed on secondary drive because of the "Windows is unable to find a system volume that meets its criteria for install" error message when selecting the install location because it needs a Primary Drive.
In the Microsoft Knowledge Base they recommend removing the primary drive to overcome this but I tried and it failed.
Do I HAVE to go out and buy XP (which allows installs on secondary drives) and then upgrade to Vista.
I'm so darn frustrated with this issue I wondered if anyone has managed to do this successfully.
Thanks
Aln

No problems here. I have Vista 64 Ultimate running on a different internal drive, and I didnt remove my primary OSX drive to do this. In fact it worked without a hitch. There must be something you are doing wrong in the bootcamp preparation phase.

Trouble installing Boot Camp drivers ????????

Hello,
I have got as far as installing Windows XP on my new MacBook and now I am supposed to be installing the Apple Boot Camp drivers. I have 2 disks that came with my MacBook:
Mac OS X Install DVD
Applications Disk
I have tried inserting both of those disks, however, neither of them have the setup.exe file and it appears missing. What am I doing wrong? I cannot seem to find the file, however, I need to be able to install the drivers. Please help. Thanks!

shmootz wrote:
No, it still doesn't work. I have a program called "MacDrive" running (a program that lets you access the Mac OS X partition). Maybe that could be the problem. The only problem is that I cannot seem to quit the program to test it. I think that MacDrive could be the problem ????
Most likely that's the problem.
See here for a solution: http://assist.mediafour.com/index.php?a=knowledgebase&_j=questiondetails&i=55
Hope it helps
Stefan

FireWire on Windows 7 (Boot Camp) don't work

Hi,
I installed Windows 7 on a partition on my Mac (MacBook Pro retina, 15 inch, 2.6, 16 GB ram), for install cubase. I have a Audio Capture (Edriol FA-66), that connect to the computer with FireWire (I have also the Apple Thunderbolt to FireWire Adapter), but when I connect the firewire cabel to the Mac, the windows don't reconize the firewire device. I searched that in the web, but I didn't found my problem (I tried to update the "1394 OHCI Compliant Host Controller" in the manage devices, but I even don't have a "IEEE 1394 Bus host controllers").
I must fix it, because I have to use my Audio Capture (in the cubase).
Tanks for everyone who can help!
Roi!

By golly, this really fixed it.
I can't fathom how the Boot Camp drivers think it's a good idea to not just install all drivers needed for proper operation of the hardware, but apparently so.
In my case I have a Firewire 400 audio card, M-Audio Firewire 410, which M-Audio can't be bothered making drivers for Mac OS X for anymore, and I need to use it for recording vocals next week on the road.
I purchased a Thunderbolt to Firewire 800 adapter with my new MacBook Air 2013, and a Firewire 400 to Firewire 800 cable, and the thing just didn't work when I plugged it in.
I had installed Boot Camp before plugging it in.
I just re-installed all the Boot Camp drivers with the device plugged in, and lo and behold, the device (and the Firewire port in general) was finally recognized.
It works.
Thank you!

Help with Boot Camp Drivers

Sorry if this is in the wrong section, but I need to know. I have been trying unsuccessfully for about a month now, and I cannot get Boot Camp drivers to work. I have consulted many guides from the internet, gone to a Mac Store for support, no help from either.
I am running on a new Macbook 13 inch with OS X 10.5.6. I have installed Windows XP with SP2 built in, and I have tried installing the drivers with the Leopard CD, with a downloaded drivers CD from a website, but it still doesn't work. I have no idea what I am doing wrong, but none of the drivers work. I see the Boot Camp Control Panel, but the only tabs it has is Power, Brightness, Restart in ..., and Remote. If anybody could help me with installing these drivers, it would be greatly appreciated.

Run Bootcamp assistant and choose to download the (correct) Win drivers for your machine on a USB drive. Then stop the Bootcamp install and go to install the drivers in Win.
Cheers
Simon

Can't install boot camp drivers on my windown vista

Hello
First:-
I would like to say thanks to all of the members how helped me with allot of issues.
Second:-
I'm having a problem while installing boot camp drivers on my vista with using the Leopard disc, it always stop installing and gives me a message about sufficient privilege then i have to choose between these choices (Abort-retry-ignore)
please guys how i can solve this problem??

Well i did the same thing but i lost so many functions, such as:-
1_ Volume controller on my keyboard is not working.
2_ I cant switch to my macintosh unless if i restart and insert the leopard disc to open the startup disc and let me choose the way i want my computer to reboot.
3_ isight is not working.
4_ Bluetooth is not working.
and so many stuff.
i hope that there is another way like giving it the permission or something like that?
please guys is there a way to solve this issue?

Installed XP; Boot Camp drivers won't work.

Everything has run relatively smoothly up until i have to install the mac drivers on XP.
I installed them successfully using a leopard disk, and then the computer restarts.
Briefly before shutting down, a blue screen shows up for about one second with a bunch of data; something about an information dump (doesn't seem too out of the ordinary, but I'm mentioning it just in case).
Then the computer restarts into windows, and says it has to perform a disk check or something... it says "Press any key to skip," yet at this point not a single key on my keyboard works, so i can't skip this step.
Then it goes through a bunch of diagnostics; windows boots up and i get an error report that says software is trying to access potentially personal information, such as wi-fi rights, and other things boot camp is supposed to take control of in order to make them function.
The next step in the installation, "After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (windows XP only)," never shows up
I presume windows thinks that the boot camp drivers are a virus, and thus won't let me install them.
I do not, however, know how to fix this.
Can anyone help ??????

I had problems with the ethernet and sound drivers following the most recent bootcamp update, which installed to deal with the trackpad issues that I was having. A pretty big mess, and the guy at the Geniius bar was very nice about saying he couldn't help.
I have discovered a repeatable problem with the update. If I completely uninstall bootcamp, and reinstall from the CD before restart, the sound an ethernet work again. I would be afraid that nothing would work (like the CD rom) if I restarted in windows sans drivers. Repairing/updating from the most current update (2.1.1 (?)) available kills both sound and wired ethernet. Repeat the procedure, and everything is fine again.
Interestingly enough, the trackpad issues seem to not have reappeared.
Opinion: the 2.1.1 bootcamp update is a downdate for my new macbook, and if I have any more issues like this that kill several days, apple is going to get it back. "It just works" clearly doesn't apply to mac running windows, and for those of us who have no choice, for whatever reason, that may continue to mean no apple.
For what it's worth, one of the guys at the genius bar said a lot of his hardware didn't work in windows either. I predict an update in the future. I hope all of this gets resolved, because there's a lot to like about the mac, but the whole non-support of windows thing is a bummer and could be a showstopper for a lot of people, despite the fact that bc is advertised as a reason to switch.

Can someone help me install Boot Camp drivers to Windows 8?

Hey guys, I just installed windows 8 32 bit developer preview on my mac via boot camp. im not very familiar with exactly how boot camp drivers work, so i need a little help. First i will tell you what i have done.
1. installed win 8.
2. tried to run the boot camp 3.3.exe in windows 8. I used the troubleshoot compatibility option but an error camp up saying boot camp was already installed.
3. then i rebooted holding the option key so to boot up in osx. i then extracted the bootcamp 3.3 files to a flash drive.
4. after booting back to windows, i tried doing the compatitbility settings again with each individual file within the bootcamp 3.3 files. an error popped up saying something like "check to see if your hardware needs 32 bit or 64 bit version of this software." (i dont remember the exact wording)
i did some googling but i figured that i could get professional help from you guys.
I am going to classes all day so please be patient, because i wont be able to check this until later this afternoon.
help is very much appreciated. thanks in advance.
kpasa.

you need boot camp 3.0.x first before later versions can be installed;
Or,
I don't know what currently Boot Camp Assistant in 10.6.8 will also do a download of drivers.
But other than change Properites and try setting "use Windows 7 mode" and such, I think you are left high and dry with whatever is in 8.
And I use 8 on two of three systems. I left my Mac Pro @ Windows 7 for now but I much prefer Windows 8, yes.
I would not have chosen or gone with any 32-bit version. As long as you have 3GB RAM or more, forget it. Use 64-bit.
I have not seen or rather read any "success" stories with 8 and Apple drivers though.

Windows 7 wont boot after install of boot camp drivers

I have been trying to get boot camp on imac mid 2010 with Maverick. TodayI used
Boot Camp Support Software 5.1.5621
The first set of drivers
Boot Camp Support Software 5.0.5033
kept crashing on windows. Today I noticed a new set of drivers, well its the same issue. If I leave off the boot camp drivers windows is fine, except no sound and other driver missing issues but it works. The problem seems to be Mav or the drivers, before updating to Mav everything was fine. Sometimes I can even get to the windows log on screen, at one point I was able to log on and do things. So being smart, I restarted and the problem came back. Who says Macs dont have issues.
Any thoughts

Just ran into this same issue.
My problem got resolved after using the x64 version DVD of Win7 (just x64 instead of the DVD that had both x86 and x64 versions).
What I did:
My host is Windows 8.1
After installing Windows 7 x64 as VM on my 8.1 based laptop two days ago, I wanted to do the same on my desktop PC, but I had the same issue described here.
I used a DVD just with the x64 version for my laptop and a DVD with both x86 and x64 version for my desktop.
Tried repairing as advised by a post, but got the error: "This version of System Recovery Options is not compatible
with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows."
I exported and imported the VM from my laptop to my desktop to test it and it ran with no problems.
So I tried the DVD that had just the x64 version of Win7 and that installed without issues.
I'm curious if this happens only when a DVD with more than one Win7 versions is used.

Need help installing my graphics driver in windows vista via boot camp

New to mac so first time on forum as well.
Love the Mac but i also want to get on some old games. C&C The First Decade mainly.
I am currently using below.
Mac mini Mid 2011 processor 2.5 GHz Intel Core it
Memory 4 GB 1333 Mhz DDR3
Graphics AMD Radeon HD 6630M 256 MB
Software Mac OS X Lion 10.7.5
Installing windows vista home premium 32 bit
I have installed windows vista home premium using boot camp assistant and downloaded the windows drivers as well. After i have installed windows i installed boot camp using my Mac OS X snow leopard which installed boot camp 3 or 3.1 i believe and i eventually got apple updates for 3.2 which is what i am now runnning on vista. I had trouble getting my sound to play through my speakers at first but eventually got them working and now it is my graphics driver that i cannot seem to get working. In vista(I also downloaded service pack 1 and 2) when i go to control panel and check out my device control it shows a yellow exclamation point next to the adapter. I guess i need help in getting my graphics installed correctly on my windows. Is there something i should take off to install the correct driver? Or do i just need the correct driver download? If i have the correct driver how do i upload it onto my windows side in the device control.
When i try to run c&c generals/zero hour i get a directx 8.1 error, red alert 2 is black but i can hear. i know these games can work i installed the graphics correctly the first time when i did not have sound as this is my second time installing windows so the game did load when i did not have sound.
Advise?
I was thinking about saying forget this i can't waste hours of my time anymore but i have to be close to getting everything working if i had graphics before and no sound but sound this time and no graphics. I was also thinking about just buying windows 7 home premium sp1 64bit system builder dvd off amazon and reinstalling windows using windows 7 but i want to make sure i can play these games before i spend the money. I thought my mini couldn't support windows vista and if it did only boot camp 4? how am i getting this far to get things to work?
What is the driver i need to install to get these games working? What do I need to do or what am I missing???
Do i need to install a different boot camp off apple and find a driver that will get mine to work in vista?
Any and all responses will be greatly appreciated i have been at this everyday for hours.

Also is there something, say maybe a driver, that was installed i do not need that is blocking me from installing the correct drivers? What driver in my boot camp folder do i need to install to get to the correct display to run those games.

Can't install Boot Camp Drivers on Win 7 (Fusion)

I'm really sorry - I know this has been asked a thousand times before, but every response I've found so far either didn't work for me or it was too technical for my limited knowledge. I'm on the verge of tears after having tried to solve the problem for over 5 hours. It's past 2am here in Australia and I really should go to sleep but this is driving me insane!
Yesterday I installed Windows 7 on my Macbook Air (13" 2011 model, running Mountain Lion) using Fusion 5. I need to run Windows-only applications for work, which also requires accents (I am a translator).
As I didn't go about it using Boot Camp, I tried following this step-by-step to get my keyboard working properly: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&d ocTypeID=DT_KB_1_1&externalId=1005578
No luck.
I downloaded the drivers using Boot Camp onto a USB stick formated as MS-DOS (FAT). I tried running setup.exe but keep getting the horrible "This version of Boot Camp is not intended for this computer model" no matter what (tried the "Troubleshoot compatibility" trick, tried re-formatting my stick and downloading the drivers again... nothing worked).
I then tried to run AppleKeyboardInstaller64.exe only and got an installation wizard. Windows says installation is complete, although I can't see this driver on the program list (should I?) - I can only it see it when I go to Control Panel\Programs\Programs and Features (from there I get the option to uninstall it but not to open it). HOWEVER, when I attempt to add an Apple keyboard, I can't see any, under any language.
I have tried alternative solutions like building my own keyboard layout but that didn't work either because I can't make the accent functions work in order to set up the layout!
Adding a foreign keyboard layout to Windows just gave me a very random set of strokes that will drive me insane if I have to type them regularly.
I just want to be able to use the standard strokes for accents on both OS:
Alt+e for á
Alt+i for ^
Alt+c for ç
Alt+` for à
Alt+n for ~
Can any good soul help me? I'm not an IT person, just someone who used to be married to her Mac (a very happy marriage) and who is now about to throw the laptop out of a window. Please HELP!!!

That article was also my starting point and I have followed those steps again and again and again. I haven't slept, I haven't done anything other then try to make it work for more hours than I can count. I came here for help because that solution is not working for me.
The region and keyboard type settings simply don't have the Apple keyboard layout listed. As I said, someone on the Fusion forum tried to follow the article's instructions too and he managed to get it working because he COULD run setup.exe (Boot Camp Drivers) on his machine, and I CAN'T. Yes, it is all explained in that article... but the drivers WON'T INSTALL, I get an error message saying "This version of Boot Camp is not intended for this computer model".
First you said it wasn't physically possible for me to install the drivers, then you said I should just follow the article. Well, the article clearly says "Install the Boot Camp Windows device drivers in the virtual machine" which you just said couldn't be done! I want to cry. I should have just bought a second laptop, this is too painful.

Can't install Boot Camp drivers on Early 2010 MBP

Hello there, so I'm having a problem installing drivers as you can see from the title. I was trying to create a Boot Camp partition on my girlfriend's MBP. She has the 2010 early one. Now we got windows installed on there with no problem; however, we can't seem to get the drivers that allow her speakers, webcam, etc. to work.
Initially we tried using my Snow Leoperd OSX disc because as far as I know she has snow leoperd too and she can't find her original OSX disc. I have an early 2011 MBP so when I tried using the boot camp drivers on my OSX disc it would not work. It said the drivers on mine weren't made for hers. Whatever no biggies, so I google an alternative and tried to download the drivers from boot camp manager back on her Mac Partition. It said that the drivers could not be found or could not be downloaded. Something to that effect. So now that we can't download the drivers, or use the original disc, what other options do we have?

Hello Arroyo1291,
Welcome to Apple Support Communities! Given your situation I strongly recommend you to call Apple Care support at 1-800-275-2273. When you get in touch with an AppleCare representative, ask them for a replacement Mac OS X install DVD (I think Apple calls them Fullfillment Disks). Give the representative your girlfriend's MacBook Pro serial number and tell them that the Mac OS X installation DVD that came with her computer is now missing and that you want a replacement DVD. Also, make sure to ask them if the replacement Mac OS X install DVD contains the Windows Bootcamp Drivers on it like the original Mac OS X Install DVD that shipped with your girlfriend's MacBook Pro.
One last thing, if your girlfriend's MacBook Pro is not under the AppleCare extended warranty, they may charge you a nominal fee on the replacement disc order.
Best of luck!

Mid-2010 Mac Mini - black screen after installing boot camp drivers

I successfully installed Windows XP Service Pack 2 on my new Mac Mini. The display worked without issue in XP at this point.
After doing this, I proceeded to install the boot camp drivers. They installed and automatically rebooted the machine.
After reboot, Windows XP no longer has a functioning display. The display is a black screen and eventually the monitor shuts off.
Things I've tried:
- Reset PRAM
- Reset SMC
- Tried both Mini DisplayPort and HDMI connections to connect to the HDMI port on the monitor
- Booting into Safe Mode. Holding down F8 successfully brought up the Safe Mode options, but again the display was blank after choosing the Safe Mode option and attempting to load Windows.
Message was edited by: mullingitover

Update: Other stuff I've now tried--
- Swapping out RAM modules. I've tried it with the stock 2GB sticks in place, also with a single 4GB stick. Same result.
Other interesting/troubling problems:
- Unable to boot into Safe Mode with command line. The text-only interface with safe mode options that is reached by pressing F8 during windows startup is displayed. However, no matter which option I choose, the result is a dead display.
- Unable to boot with Windows XP install CD (?!). After choosing the CD at the boot selection screen, the display blanks and never wakes up.

2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!

Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

Boot Camp drivers won't install correctly.

Greetings. Recently I formatted the XP partition on my Mac, in order to do a clean installation of windows. I did everything as explained in the guide, using the Boot Camp assistant and so forth. After the installation completed, I inserted my Leopard DVD and installed the appropriate drivers. Although the message declared that everything went smoothly, the only thing I could find that was installed correctly were only the audio drivers - no video drivers, no ethernet, wireless, nothing else. I repeated the whole process (including reinstalling XP) with the same results. Any suggestions?

You will need to reinstall Windows and use the boot camp drivers that came with your machine. Do not use previous boot camp drivers or the boot camp drivers on the Leopard disk. I made the same mistake with my MacBook Pro, I installed boot camp drivers first from a CD copy, them from Leopard and had the same issues as yourself. Then I installed boot camp from the MacBook Pro DVD that came with the MBP and most of it installed. However, not all was working properly. I wiped the boot camp p[artition and reinstalled XP and used the boot camp drivers that came with the MBP and everything worked smoothly. I think the boot camp drivers are specific to a machine, at least in the case of this MBP.

Installed Vista 64 however boot camp drivers dont work - Help

Similar Messages

Maybe you are looking for