Installed windows service pack and now can't see igoogle content

I recently installed a service pack for Office 32bit on my Sony Vaio. Now I cannot see any of my page content on Igoogle, or certain features on Ebay. I checked my popup filter, and even turned it off, and that didn't help.

The updater's now built into iTunes, which came with a new version of the iPod's required background service, rendering all previous updaters void.
To get to the updater, go to the iPod in the sources panel (left-hand side), and you should see the Update and Restore buttons.

Similar Messages

Installed new iTunes version and now can't see my Appletv

Having just installed iTunes 10.0.1.22 there is no tab in preferences to see or connect to the Appletv. Appletv syncs with my main PC running windows and a previous iTunes version.
Any suggestions?

Same issue here as I'm sure everyone else is dealing with.
iPhone 5S running iOS 8.1, iTunes running 12.0.1. Windows 8 PC (fully updated)
AFTER downloading iOS 8.0, previous syncs would partially sync playlist (not all songs, or just the Pic icon for video files but no video files themselves and would show overloaded GB storage while syncing and stop syncing)
Recent patch seemed to fix it.
NOW after 'upgrading' iOS and iTunes, making sure Apple Mobile Device Driver (AMDD) is installed and working, updating PC drivers, uninstalling, rebooting, and/or restarting multiple times and in different combinations for the last 3 days the following: iPhone, iTunes, PC, AMDD, as well a doing every 'online' fix/suggestion I can find, i.e, switch off WiFi/Handoff/WiFi Sync, everything the iTunes Help suggest, reset network setting on iPhone.
Currently - iPhone 'seen' on Windows, NOT on iTunes, Can open iPhone in windows to access photo folders, whenever you plug in the Lightning USB it asks the "Trust" question were all familiar with and nothing!
APPLE- Millions of your Customers complaints are falling on deaf ears. This is an issue that seems to get a little worse each iOS update that affects all previous models of phone. DO SOMETHING! SAY SOMETHING!

Every time I try to install windows service pack 2 I get error message WindowsUpdate_80004005

When I try to install windows service pack 2 I get error message WindowsUpdate_80004005, has anyone else had this problem and how do you fix it

If you have an external drive (USB thumbdrive or hard disk) connected, disconnect it and try the service pack installation again.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

In Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed Downloaded much and now can not see how to fix it?

in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
Downloaded much and now can not see how to fix it?

I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue.

I updated cs6 camera raw and now can't see the camera metadata I used to see and cannot find it in photoshop itself.

I updated cs6 camera raw and now can't see the camera metadata in raw that I used to and can't see it at all in photoshop. can this be fixed?

sgterrill65 wrote:
I am using windows 7 64 bit not mac
Next time, please give all pertinent information from the get go.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

TS1506 I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments.

I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade

Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

My wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?

Hi, my wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?
System fonts deleted accidentally. Does anyone know how I can fix this please?

Thanks Mike,
Absolutely right. I restarted in Safe Mode. This enabled me to see the actual text on the screen. Then I backed up. Then reinstalled. All fixed.
Thanks again,
Chris

ISE Posture Condition for Windows Service Pack and Remediation

Hi,
We having ISE ver 1.1.1 and currently on PoC. I have the following points to be clarified for Posture and Remediation.
1) How to configure a condition to check Windows Service pack (may be more than 1 Windows favor such as XP, Win 7 and Win 8) and how to remediate in case client is not complying with Windows requirement.
2) I configure AV condition and looks its working fine, however I still couldnt find the place to how to remediate in case client is not having proper verion and AV definition on his PC.
3) We have a Authorization profile configured with dACL"Posture Remediation" where we allowing AV server update url and also matching ACL configured on switch "Posture Redirect", wants to know the exact purpose on these two ACLs.
4) where can we see the logs of none-complaints logs and find out the reason for non-complaints
appreciate if someone can please give us a proper document to achive the above task or send me any working senario configuration steps.
thanks in advance.

1. Windows Server Update Services (WSUS) remediation remediates Windows clients from a locally managed WSUS server, or Microsoft-managed WSUS server with the latest Windows service packs, hotfixes, and patches (WSUS updates) for compliance. You can create a WSUS remediation where a NAC Agent integrates with the local WSUS Agent to check whether the endpoint is up-to-date for WSUS updates. You can also duplicate, edit or delete WSUS remediations from the remediations list.
You can configure Windows clients to receive the latest WSUS updates from a Microsoft-managed WSUS server, or locally administered WSUS server for compliance.
The Windows server update services (WSUS) remediations list page displays all the WSUS remediations along with their names, description, and as well as their modes of remediation
check the following link for configuration
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_pos_pol.html#wp1554782
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_pos_pol.html#wp1554884
2.for AV/AS Remidiaton configuration check this link http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_pos_pol.html#wp1657420

Unable To Install Windows Service Pack 3

Hi,
I just reinstalled windows xp (32bit)for the 3 time in as many months, and I've ran into a problem with the reinstallion Windows Service Pack 3. I keep getting an error that says something to the effect of 'file x can not be found. are you sure (windows dl location) is correct. would you like to retry.' and this repeats a few times until I lose my patience and give up. Anyone know how to fix this?
Cheers
Alex

Hi Alex,
maybe this http://support.apple.com/kb/HT3841 can help you.
Also if you have any kind of 'unneccessary' external devices connected while trying to update, like external harddisks, printer, scanner, etc., disconnect them before applying the update.
Hope it helps
Stefan

Windows 8 Upgrade and now can't access ICloud contacts or calendar

I just updated to Windows 8 and now I can't access my ICloud contacts or calendar in Outlook. Tells me "The set of folders cannot be opened. The information store could not be opened. Any suggestions or fixes?

Try temporarily recreating the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then use the password for your current ID to sign out of the account on your Mac (even if it prompts you for the password for the old ID). If you can sign out, choose Delete at all of the prompts (your data will still be in iCloud), then go back and change your ID back to the new email address again and sign in with it on your Mac.

Installed Lion and now can't see or print shipping labels from ebay anymore

I am a ebay seller and I print several shipping labels every day from the ebay website, everything was ok until I installed Lion OS, now I buy the label but I can't see it nor print it. I spent 2 hours with apple and ebay on the phone and they couldn't solve the problem, I tried firefox and same problem. Please help!!!

You cannot revert back to iCloud after enabling iCloud Drive on your MacBook Air. If you want to be able to access your documents on all your Macs you'll have to upgrade the others to Yosemite and enable iCloud Drive on them too.

What is 10661? Tried installing the Beta Firefox and now can't get on internet. Keep getting 10661?

Downloaded Beta version 4.0 of Firefox. Installed and now I can not connect to the internet. Get a message "The application Firefox can not be launched. 10661

To Apple Discussions!
You posted in the wrong forum. An iMac DV 400mhz is a G3 CRT not an G5 iMac. See http://docs.info.apple.com/article.html?artnum=58669 iMac: How To Differentiate Between Models (CRT)
You will need to repost in the Internet, Networking and your iMac (CRT) Forums.

Help! I installed the wrong firmware and now can't access the camera to change it back!

I have done something silly and wonder if you can help to get me out of a fix. Yesterday I upgraded the firmware of my camera and I can no longer see the camera on the network, even when it is connected by a wired connection. I have tried a hard reset but that has not helped.
I now realise that I have upgraded with firmware via a link from the US website and it is a different firmware version to the UK site. It is also designated as a RoSh version (although I do not understand the significance of this). Presumably US networks are set up differently to EU ones?
I upgraded the firmware from version 1.10 to version 1.25 (RoSh). The European firmware upgrade is designated as version 1.21.
The only way forward that I can see is to find a network that will recognise the camera and then change the firmware back to the European one. Any ideas?

Whats the Model number of your Camera. As you have uploaded the wrong firmware of your Camera. I think you can download the Latest firmware from the European website and upgrade the firmware of your Camera using TFTP tool utility.
Go to ftp.linksys.com/pub/network... and download TFTP.exe File on your computer. Once done connect your camera to the Computer and provide a Static IP to your computer.
Double click the tftp.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.115...
For Password- Enter the password you assigned the camera. By default, the camera’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your camera, wait for 30 seconds and re-connect the power cable...Now re-configure your camera...

Installed itunes 10.5 and now can't use function keys on my keyboard

I just downloaded iTunes 10.5.0.142 and I now can't use the function keys on my keyboards to change track, pause etc. Is anyone else having this problem? Also, why is it now ctrl+shift+m to switch to mini player? Ctrl+m doesn't do anything now

Yeah I agree the white keyboard was clunky, I dont really miss it. The problem is you can't just use the new lighter keyboards with the white imacs bc the operating system is outdated. The apple store told me I needed to upgrade my operating system and it would cost me 170 dollars, which I found incredulous.
I dont think its due to an app running or an expose issue, thanks for your responses.
aghhhh maybe ill have to buy an old crusty one on ebay. why the heck would apple not make a compatible keyboard for their 3 year old computer anymore, WHYYYYYY???!!!

I installed Windows 8.1 and now cant get Flask Player to download - WhY?

I am having trouble updating to the latest version of Flask Player. It began after I installed Windows 8.1 yesterday. I have followed the Adobe install steps, and it says I have Wiindows 8.0 already installed on my explorer then it tells me in another section that I don't have it installed on my computer(?). It is as though Adobe does not recognize 8.1 yet/

Partly right. The site (like a great many - Facebook and Yahoo to name just two) isn't always recongizing Win 8.1 oe IE11.
Microsoft recommends enabling Compatibility View for sites that have troubles with IE11 in WIn 8 or 8.1:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

Installed windows service pack and now can't see igoogle content

Similar Messages

Maybe you are looking for