Installed Windows X64 last night

Well since my system still wasn't quite as stable as I was hoping for by now, I installed Windows X64 and So for no crashes at all. As for running the FEAR demos, I'm still having a black screen/lock up. But looking at the FEAR forum tech sight, lots of people are having that same problem. I'll wait till the full game comes out next week or two.
THe next thing I was thinking about is upgrading to 2 gigs of memory . 2@1gig DDR. How many think it will help my system out for over all performances. Or will I even see a difference. And if deside to upgrade, should I just add another gig, or scap the memory I have and get 2 sticks of 1gig DDR better quality memory . See specs below.
Thanks

Hey FEAR works just great on my system running windows 2000, must be a windows XP thing right?
Oh and BTW that's three threads now you've asked the same sort of question about RAM, just keep the one...

Similar Messages

HT4628 Since I installed Mountain Lion, last night, the Internet icon shows an exclamation sign, as if there's no internet connection, but it's connected.

Since I installed Mountain Lion, last night, the Internet icon shows an exclamation sign, as if there's no internet connection, but it's connected. Has any one had this situation.

Ok, I'm stupid.
Found another thread about this and typing 'install OS X Lion' in spotlight did the job.
https://discussions.apple.com/message/15670460#15670460
excusez-moi

HT4623 I installed iOS 7 last night and when I started the i-pad this morning, it ask for a password. I did not set a password and now my i-Pad is disabled and I can't use it, can you help?

I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Can't instal Windows x64 need Drivers

Hi,
I have problem with instal Windows 7 x64. Stock on Notebook its Windows 8, but programs that i need for work doesn't support windos 8 yet. I bought Win7 x64 but when i try to instal this they want me to chose cd/dvd drivers and i dont have any. I tried conver dist from gtp to mbr, i changed in bios UEFI to Legacy Mode, Sata type from AHCI to compatibile, Diskpart show HDD normaly but i can't instal this ***** Win x64. x86 its work normaly but i need x64 for work-app. For now im on Ubuntu from USB-HDD but i need this Windows From Hell on my notebook. Somewhere i read that i need onBoard Controler Drivers For in download section here i dont find any.
Can any one know how to resolve this problem?
EDIT: Forgot. I have g780 on i3 cpu.
Solved!
Go to Solution.

hi Tokarq,
Welcome to the Forums.
If you're getting the "A required CD/DVD drive device driver is missing" or "A media driver your computer needs is missing" error when installing Windows then you may want to check this microsoft article as it maybe caused by one of the following:
- The installation DVD is removed during the setup process.
- A low-quality DVD was used to create the installation DVD.
- The speed at which the installation DVD was burned was too fast.
- The DVD drive cannot read the media.
- The ISO file is corrupted.
In addition, you can also try these steps:
1. If you downloaded the Win7 64-bit ISO from the microsoft website, verify that the ISO is not corrupted by comparing the MD5 / SHA1 Hash from the microsoft site. To get the hash, download and install the Microsoft File Checksum Integrity Verifier and foillow this guide.
2. If you're using a Win7 64-bit DVD installer, try to follow this guide on how to create a bootable Windows 7 64-bit USB installer and use the USB 2.0 port to install Windows.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My aps won't open. Installed software upgrade last night and now my apps (3G S) won't open

Last night I did a software upgrade and now when I try to open my aps they blink and do not open. What's the fix?

I have a brand new 4G, just got a request to update to OS5.0. so I did that. I can't download a single game, all of which are free. After I get the ridiculous message about "Terms and Conditions" having changed, I accept it but it never does anything, just says "Loading" and never gets the app, it doesn't show up in my download history, and no icons on the screen. Other apps just say "Waiting" and never do anything either. I have an awesome connection and signal to my router, and all other features of the phone work.

KeyAgent and MacHAL didn't install when installing Vista x64

Hi All,
I have seen a couple of sketchy posts about this, but nothing that really explains what's going on here.
I tried a clean install of Vista x64 last night on BootCamp, and I loaded the new Mac Pro BootCamp drivers than are available for download on the web (they are supposed to support x64 now).
I got two errors... KeyAgent and MacHAL wouldn't install. As some people have mentioned, the installation said I didn't have the correct permissions.
Anyway, the installation proceeded when I selected 'ignore' to these errors... and on the face of it, all seems well with my Vista installation.
However, question is, what do KeyAgent and MacHAL do...?? Do I need them...?? Is there a way I can get them installed...?? Etc..
Many Thanks

Hi, Just hit the same problem with installing Vista Ultimate x64. KeyAgent & MacHAL failed to start, did the ignore and everything looked OK. Installed the Mac drivers, but no Bluetooth, Airport etc, plus the BootCamp control panel and system tray were missing.....
Removed the BootCamp partition completely and reinstalled this time with x32 version of Vista,
no problems at all, Mac drivers load and everything works. Hate having to corrupt my first Mac in 8 years, but need Windows for specific PC applications.
As a side note. I had to create a 50Gb partition, due to file sizes. Downloaded MacDrive7 from MediaFour, absolutely brilliant. Lets me see the Mac Partition and my Mac 750Gb Seagate backup from Windows. One small issue, when you load software that has both Mac & PC installs, if MacDrive is turned on you can't see the PC install. Workaround - disable MacDrive7, reboot, PC version installs OK and then reset MacDrive7.
Cheers

How do i config bios/uefi to get me to install windows 7 or 8

ok, heres the system i'm trying to install windows x64 on
X79A-GD45 Plus (bios ver. 17.9)
8x8gig corsair vengence 1866(base freq is 1333)
evga 680 gtx 4gig(custom edition)
i tried 2 different hdds(3tb and 1.5tb sata 3.0 seagates) and 1 ssd(samsung 850 pro 128gig) from usb stick(used both pny 32gig usb3.0 and team 32gig usb3.0) install under legacy+uefi and under uefi using sata port 1(ports 1-2 are sata 3.0, rest are sata 2.0). to get the usb stick be bootable i used rufus and had to plug it into a usb2.0 port(for some odd reason it couldn't even boot from usb3.0 ports even tho they're enabled in the bios). i don't have optical drive even hooked in first since i don't have a burner drive at my house on standby to burn iso to it(waiting on bro to burn me a copy first so i can try installing it via optical drive).
i followed the directions correctly for rufus bootable usb, and followed directions from a few forums(not here, yet) for proper install...tried windows 7 sp1 and windows 8.1..it either had some weird data missing error or gave me a msg saying drive to install windows to not detected by installer(which is weird cause i saw it in the system status page in the bios screen). i spent the last 2-3 days trying to figure this out.
i only got this motherboard cause my asus sabertooth died(their tech support is a joke and returned to me a motherboard with bent cpu socket pins) and evga didn't have a decent version that didn't have a chipset that crashes. the msi one i picked didn't have any marvel chipsets to worry about(caused most of the x79 systems to crash and fail)
wondering if i have to use sata 2.0 ports to install the os on first..then move them later to get sata 3.0 speed benefit
any advice and pictures on how to rig up the bios would help.
btw, motherboard is reg'd with msi and with service net(via newegg.com, i'm not taking any chances with crappy tech support anymore). also i haven't even bothered with the 20 usd rebate cause i want a system to work well at least til pcie 4.0 motherboards come out

Are you gonna install UEFI Windows or non-UEFI Windows?
Check this topic
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

I installed windows 8 and have lost all sound! i have try everything help

I installed windows-8 last week and i am having nothing put proplems with it! I have no sound anymore?
This question was solved.
View Solution.

When requesting help it is always best to post full Model number and/or Product Number. Get your Product Number from the Service Tag attached to bottom, may be under battery.
Saves a lot of time to have this info posted when you request help rather than having to wait for attention, get the request, post the additional info and wait again...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Problems with Windows x64 and Sound blaster l

Hey, I have this issue with my sound blaster li've. I've just recently installed Windows x64 and now I'm having issues with my sound. It creates this weird echo sound with a small static sound everytime a game. Prior to loading any applications, the sound is just fine. I had this issue when I had Windows XP but I installed the Li've applications and was able stop that. But I can't install that application for Windows x64. Is there any solution to this? Thanks in advance.

kennydo you have aim or msn or anything where we can talk, because i have relati'vely same stuff as you. Thanks very much

HT1926 i had itunes on my pc for a number of years. worked fine last night even. today, nothing, screen gave error 7, windows error 126, tried removing and re-installing, still same message. says I am missing MSVCR80.dll

I have had Itunes on my pc for years. Worked fine last night. Today it gave me a message missing MSVCR80.dll, tried reinstalling, didn't work. Removed Itunes completely, reinstalled. Didn't work. Same message. Any fix ideas?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99196)

I had upgraded to FF 4.0.1 a while ago. Last night I got a bubble telling me that FF 4.1.0 was available and I should download and install. This version does not seem to exist. What is this about?

I had installed FF 4.0.1 and have been using it for a while. I am running Win XP Pro, SP2. Last night a messge came up informing me that FF 4.1 was now available and that it would be advisable to download and install it. I did this and everything seemed to work fine but when I look at the 'About Firefox' info under 'Help' it still tells me that I am running 4.0.1. Everything still seems to be functioning well but this disturbs me as it does not seem to have been a FF message. Can you please tell me if such a message was sent out, and if so, why, seeing as the version does not seem to have changed?

To ensure that no malicious software has been installed, try running several malware scanners. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
* Malwarebytes - http://www.malwarebytes.org/mbam.php
* SuperAntiSpyware - http://www.superantispyware.com
* Ad-Aware - http://www.lavasoft.com/products/ad_aware_free.php
* Windows Defender - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot S&D - http://www.safer-networking.org/en/home/index.html

How to install apex on windows x64 with 10gR2?

Hello,
today I tried to install the http-server for our 10gR2-database. We are using windows x64.
But I cant find OHS for this release. How can I install apex then?
Regards,
Mark

have you tried the installation, or did you just ask in advance?
in the last wekks i did a lof of installation stuff on an x64 system using the old x32 versions. even oracle sw like 10.2.0.3 client etc.
and most oft the stuff was up and running just like on an x32 system.
just keep in mind that the directory structure an x64 is slightly different #
if u install x32 software the default installation path is "C:\Program Files (x86)" and in the registry a speacial key hklm\software\wow6432node
just in case you need to patch.
in my opinion it would be worth to give i a try, but remember not on a productive system.
i'd like to hear about your results
regards peter
Edited by: yeti on Jul 3, 2009 2:41 PM

HT1459 Last night I was installing an itunes upgrade but there a problem . Error in the installation of the runtime c+. Now I am unable to access iTunes

I was upgrading my iTunes program last night, but there was an error in the installation. Runtime error of incorrectly installing of C+ by the program. Now I can not access my iTunes program. Is there a fix to this problem?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Installed kb2990942 Last night and now build fails

kb2990942 was automatically installed last night, and in that the System.Web.Mvc dll was updated from version 3.0.0.0 to 3.0.0.1. This caused my builds to fail. I believe this will happen to all the MVC 4 and 5 projects as well.
I can update the reference, but if I do that, locally it works, but the build machines fail. If I install kb2990942 on the build machines (they are on a different patch schedule), then the other builds that run on there will be broken.
Was there a reason the version changed?
Is there a way to make it so the build will work with either 3.0.0.0 or 3.0.0.1 installed?
This seems to be shortsighted on the part of MS that would require every build machine and project to be updated.

Hello,
This seems to be a problem with the windows update, maybe it's a bug, but it's not related to Visual C#. I'm moving it to [where is the forum for...] where the moderator will direct you to the right forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I gotten to notification to upgrade,i downloaded the stuff last night and it's not installing;my pc

i got the notification to upgrade to windows 10,i downloaded the stuff last night and today and i installed yet when i went into the control pandel it said "updae failed" and i saw the error code "8001004e" i did this around 2o times before but i was sure when i gt the ntification it would work. all the software is active,none had to be removed;avg is on,my pc has a problem it doesn't restart it shutds down leaving the power on,could that be the cause of not being able to upgrade to windows 10? i was very excited to get this new version

You can bypass the failed update system by downloading it and using a Thumbdrive to upgrade it get a 16GB. http://www.microsoft.com/en-us/software-download/windows10 I also have one machine fail because it had a small system partition of 100MB I used a free tool to move the partitions around gave the system on 12gb.

Installed Windows X64 last night

Similar Messages

Maybe you are looking for