Installed XP; Boot Camp drivers won't work.

Everything has run relatively smoothly up until i have to install the mac drivers on XP.
I installed them successfully using a leopard disk, and then the computer restarts.
Briefly before shutting down, a blue screen shows up for about one second with a bunch of data; something about an information dump (doesn't seem too out of the ordinary, but I'm mentioning it just in case).
Then the computer restarts into windows, and says it has to perform a disk check or something... it says "Press any key to skip," yet at this point not a single key on my keyboard works, so i can't skip this step.
Then it goes through a bunch of diagnostics; windows boots up and i get an error report that says software is trying to access potentially personal information, such as wi-fi rights, and other things boot camp is supposed to take control of in order to make them function.
The next step in the installation, "After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (windows XP only)," never shows up
I presume windows thinks that the boot camp drivers are a virus, and thus won't let me install them.
I do not, however, know how to fix this.
Can anyone help ??????

I had problems with the ethernet and sound drivers following the most recent bootcamp update, which installed to deal with the trackpad issues that I was having. A pretty big mess, and the guy at the Geniius bar was very nice about saying he couldn't help.
I have discovered a repeatable problem with the update. If I completely uninstall bootcamp, and reinstall from the CD before restart, the sound an ethernet work again. I would be afraid that nothing would work (like the CD rom) if I restarted in windows sans drivers. Repairing/updating from the most current update (2.1.1 (?)) available kills both sound and wired ethernet. Repeat the procedure, and everything is fine again.
Interestingly enough, the trackpad issues seem to not have reappeared.
Opinion: the 2.1.1 bootcamp update is a downdate for my new macbook, and if I have any more issues like this that kill several days, apple is going to get it back. "It just works" clearly doesn't apply to mac running windows, and for those of us who have no choice, for whatever reason, that may continue to mean no apple.
For what it's worth, one of the guys at the genius bar said a lot of his hardware didn't work in windows either. I predict an update in the future. I hope all of this gets resolved, because there's a lot to like about the mac, but the whole non-support of windows thing is a bummer and could be a showstopper for a lot of people, despite the fact that bc is advertised as a reason to switch.

Similar Messages

Boot camp drivers won't install from Disk

I have an old MacBook running Snow Leopard (the original OS was Leopard), and I recently installed windows 7 successfully through Boot Camp. When I went to install the boot camp drivers, neither the Leopard or the Snow Leopard disks worked. I got an error message that read something about how "64 bit is not supported by this platform." Is there any way to get the drivers outside of the disks, or am I doing something wrong?

you got it installed, just naviagate to the folder with the BOOTCAMP64.msi and run that, use Admin Privilege, and use "Troubleshoot Compatibility Mode" to run it.
It isn't you, it is Apple's idea of supported vs unsupported for "older" Intel Macs.

Boot Camp Assistant won't work - keeps asking me to use Software Update.

I am trying to use Boot Camp to install Windows but my Boot Camp Assistant won't work - it keeps asking me to use Software Update. So, even though I know everything is up to date, I start Software Update and it confirms that indeed everything is up to date. I try Boot Camp Assistant again, but the same message appears. I search every possible Boot Camp upgrade to download from Apple but they are all .exe files and need Windows to run, so those don't seem to be what I need. So I am caught in a circle of nothing working. Figures - the ONE weekend I need to install Windows and use a Windows-based program!!! And of course Apple support is closed over the weekend - another great asset to spending thousands of dollars on a product. ANY SUGGESTIONS?

I too am having a similar problem. I am trying to install Windows in a newly created Boot Camp partition. I have Windows 7 but Boot Camp Assistant only mentions XP and Vista. I put in my installation disk of Windows 7 but it refuses to install it. My OS is fully up to date.

Boot Camp drivers won't install correctly.

Greetings. Recently I formatted the XP partition on my Mac, in order to do a clean installation of windows. I did everything as explained in the guide, using the Boot Camp assistant and so forth. After the installation completed, I inserted my Leopard DVD and installed the appropriate drivers. Although the message declared that everything went smoothly, the only thing I could find that was installed correctly were only the audio drivers - no video drivers, no ethernet, wireless, nothing else. I repeated the whole process (including reinstalling XP) with the same results. Any suggestions?

You will need to reinstall Windows and use the boot camp drivers that came with your machine. Do not use previous boot camp drivers or the boot camp drivers on the Leopard disk. I made the same mistake with my MacBook Pro, I installed boot camp drivers first from a CD copy, them from Leopard and had the same issues as yourself. Then I installed boot camp from the MacBook Pro DVD that came with the MBP and most of it installed. However, not all was working properly. I wiped the boot camp p[artition and reinstalled XP and used the boot camp drivers that came with the MBP and everything worked smoothly. I think the boot camp drivers are specific to a machine, at least in the case of this MBP.

Boot Camp drivers won't install

Okay, I have tried everything. I followed the directions. Created a FAT 32 32GB partition. Loaded XP and it installed. Loaded the Leopard disc that came with my new MacBook Pro. Looks like they are installing, then there is the blue screen with with lettering and it's gone in a flash before I can read it. The next thing I see is a message indicating that there was a serious error and it list some windows install fill and asks if I want to try again. I do and the same message is there. Windows is installed and works fine but there is no Boot Camp tray item. I also tried to repair the Boot Camp drivers but that doesn't work either! Can someone please help me?

Hi,
i had exactly the same problem and been browsing galores of forums with no real answer.
it seemed though that a lot of people had issues with the bluetooth driver and i believe that is precisely the problem with this.
Here is what i did and what fixed the issue (my XP is running flawlessly now on my iMac):
- install XP SP2, do all the updates (you might have to connect with a cable LAN, since the wireless might not work because of the drivers (dont worry, we fix this in a minute)
- copy the Bootcamp Drivers folder from your Mac OS CD to the C: harddrive (this is neccessary so you can continue with the next step)
- here comes the magic part: DELETE the file BroadcomInstaller.exe from the Bootcamp Drivers/Drivers directory (the one you just copied to the C: drive)
- NOW run setup.exe in the Bootcamp Drivers directory
this basically installed everything except the BT drivers to my system
ONLY NOW can you run the bootcamp update (to be found here: http://support.apple.com/downloads/BootCamp_Update_2_1_for_WindowsXP)
Before 2.0 version of bootcamp is installed this update wont run.
the nice thing is, running the update actually fixed also the BT on my iMac, so now everything works as it should.
hope this helps.
K.

Windows 7 wont boot after install of boot camp drivers

I have been trying to get boot camp on imac mid 2010 with Maverick. TodayI used
Boot Camp Support Software 5.1.5621
The first set of drivers
Boot Camp Support Software 5.0.5033
kept crashing on windows. Today I noticed a new set of drivers, well its the same issue. If I leave off the boot camp drivers windows is fine, except no sound and other driver missing issues but it works. The problem seems to be Mav or the drivers, before updating to Mav everything was fine. Sometimes I can even get to the windows log on screen, at one point I was able to log on and do things. So being smart, I restarted and the problem came back. Who says Macs dont have issues.
Any thoughts

Just ran into this same issue.
My problem got resolved after using the x64 version DVD of Win7 (just x64 instead of the DVD that had both x86 and x64 versions).
What I did:
My host is Windows 8.1
After installing Windows 7 x64 as VM on my 8.1 based laptop two days ago, I wanted to do the same on my desktop PC, but I had the same issue described here.
I used a DVD just with the x64 version for my laptop and a DVD with both x86 and x64 version for my desktop.
Tried repairing as advised by a post, but got the error: "This version of System Recovery Options is not compatible
with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows."
I exported and imported the VM from my laptop to my desktop to test it and it ran with no problems.
So I tried the DVD that had just the x64 version of Win7 and that installed without issues.
I'm curious if this happens only when a DVD with more than one Win7 versions is used.

Windows Boot camp drivers won't install

So I'm trying to put windows on my mac again, for the fifth time since windows won't let me activate it anymore. Everything goes fine and it installs and I put the Mac os x install disc 1 in to install the drivers. It loads up and goes through the process of installing the drivers. Once its down it asks me to restart the computer which I do. Once I get in however, none of the drivers are installed like nothing ever happened. I can tell because I can't get internet and the trackpad won't work properly. The boot camp faq shows up and another window to update something shows up but it need the internet to work. I go and try to repair the drivers and it runs its course, restarts and still nothing! No drivers. I've tried deleting the drivers and reinstalling them, removing the partition and reinstalling but nothing is working. I've gotten the drivers just fine before but now they just won't install. I've updated my mac from 10.6.4 to 10.6.7 so can that be the problem? Its the only thing I did different.

I'm at my office at the moment and I don't have the disc to view. Tell me, have you found the drivers folder? You can select any driver and it should automatically open boot camp and install all "Apple Drivers" while in windows mode. Then after installing bootcamp, you can install Apple updater. I'm adding more than I should because I don't know how far along you are- if you look around the clock area in windows, you should see a boot camp icon; is it there?
Send me a screen shot with your disc open and I can maybe help you from there. [email protected] Otherwise, I will look at the direct path this evening and post the info here.

Boot Camp drivers won't install on Windows 7

I have a late 2011 MacBook Pro (10.10.2 Yosemite), and just installed Windows 7 (64-bit) via Boot Camp. It works fine but I am unable to install any of the drivers (version 5.1.5621). I put them on a flash drive but when I open Drivers/Apple/BootCamp, it says the program can not be run, check your bit version for compatibility (something like that)... I then try the troubleshoot way but this is what happens-
Thanks for the help.

Please verify that you have the correct drivers using System requirements to install Windows on your Mac via Boot Camp - Apple Support and install or repair using setup.exe in the BC folder.

Boot Camp Assistant Won't Work....

I've been wrestling with this for two days now (along with my very technically adept brother). I'll try to offer as much information as possilble. I've scoured this and other online forums without success. Here goes:
Early 2011 MBPro/ 7500rpm HItachi dry/ OS 10.8.3 / no updates in queue....recent clean install of OS at Apple store ~2 mo. ago (due to battery issue).
Placed BootCamp partition on mac ~6/ 2012....easy install and worked flawlessly. Used Amazon purchased legal copy of Windows 7 (64 bit OEM System Builder Pack, CD which included Service Pack #1; purchased sometime early 2011). Downloaded all required updates (then and with continued booting into Windows). Installed Stream/ Origin and 4 games (CoD, Portal etc.). Worked fine without a hitch. Two Mac side extensions added for use: Boot Champ for quick changing of OS and gfxCard Status (to control Mac OS side video card choice). NO PROBLEMS with extensive use!
This week: exchanged out Hitachi driive with Samsung SSD (512gb 840 PRO) after extensive online research (in particular MacOS Rumors which has long thread for this SSD. Note: Apple uses the Samsung 830 series SSD in rMBPs). Used CCC (CarbonCopyCloner). Single partition/ Mac OS Extended(Journaled).No problems with OS and SSD. Went to set up Boot Camp partition (note; NOT to reinstall windows; I just want the partition to WinClone my partition contents from the Hitachi over to the Samsung. Many on other sites using the same SSD have been able to do this....some have had issues akin to mine. Problem: BCA (Boot Camp Assistant) only offers two options: download Windows software (drivers etc.) or re-install Windows 7. I of course I only need the first. However, after (~20) trys the download still hangs (~half/way). When I quit and check the target USB: empty, not even fragments. Have tried with at least 6 USB (8gb) drives of 4 different manufactures....no change. Have reformated the USB drives (MS DOS/Fat32 ...all Disk Utiilty offers) no change. Was on phone with Apple Technical today, tried a few things but couldn't get the download to perform (removed all other USB devices from MBP/ tried using Ethernet to router etc. ..) They will get back to me tomorrow. NOTE: Apple Technical DOES offer BootCamp Support!
Have tried using my Win7 disk to make .dmg and converted it to .iso and place iso files on desktop and into destination USB drive: no luck
Tried to use my Hitachi as start-up disk then try to partition the SSD: no go
Tried to use my original OSX.6 disks.....won't take/ work on my MBP now (I think due to previous firmware updates).
Saw some tidbits online that since I had first used BCA that Apple had revised it and its options?
One thing that my brother and I noticed: when he tries to use BCA on his 2012 rMBPro (Samsung 830 SSD) he is offered a third ( the first ) option: ' Remove or resize (?) current partition'. May just be because he already has a partition and I don't.
I will post other 'tries' as I remember them or try them. I suspect that at the end of this road a 'clean sweep/swipe/re-format/ re-install' etc. may be the last attempt but I've seen enough of this issue on line that a simple process (if discovered) would come in handy: many of us often change out internal drives and will probably continue to have Boot Camp partitions ( also: my SSD was placed on the 6gb supported SATA as the original HD).
So: any ideas, suggestions or (online forums to check )etc. would be much appreciated .....and not just by me!
Sorry for the long post but wanted to give as much information on the first pass as possible.
Thanks.....

Follow up:
Used WinClone to make image of my Boot Camp partition form former internal HD (conneceted via USB /2.) Very slow/ but if you track with your cursor you can see slight change, took about 2-3- hrs. Note: told WinClone REPLACE BCD file ( 1 of 2 options given during image production(see notes at WinClone site).....
Previously, and now, did not use (from WinClone site; 'twocanoes') instructions to use ' Sysprep' program in windows prior to making my image (had been reading from a different instruciton set).....
Sequence:
1. PRAM reset (at least 3 consecutive times/new USB drive).
2, Created partition..Did NOT re-install Windows..When it asked( after it had NTFS prepared the Boot camp partition (?)..... I quit the applicatation and checked that the partition had been made (disk utility/ also...about this Mac...).
3. Used WinClone (2.4)...new USB drive...did not use Sysprep route (on 'twocanoes site' this is instructed); cloned from 'Boot camp' icon deposited on my desk top when I mounted my old HD using USB 2 .
4. Did not 'keep' Memory Caches' when offered prior to imagining ...
5. Saved boot camp image (image on new SSD drive from former HD drive via USB 2 (former drive showed
'MacHD (or whatever your name is for your drive ) as well a 'former' BootCamp drive Icon.
6.Took awhile....restored to new Boot Camp Partition via WinClone instrucitons.....
And: Worked. No Window Id or or authetication asked for ; Windows desk top looked identical as from previous HD; STEAM and ORIGIN immediately updated....chedkced into each for a game : all settings perfect....not asked to ID or change anything.....just faster!
Hope this helps someone.....!

Mac Mini mid 2011 Windows 7 64 Bit crashes to blue screen after install of Boot Camp Drivers

Hello.
I have installed Windows 7 64 bit on my Mac Mini mid 2011. After the install, I install the Bootcamp Drivers and then after the restart it starts to load and then crashes. Is there some trick to get it to work, It runs fine if I do not install the drivers, but not much works on it.
Thank you in advance for any help.

Hi,
Same thing here - but on Mac mini mid 2010...
I have installed the newest drivers downloaded via Boot Camp Assistant 4.0 (from Lion 10.7.1) on Windows 7 64-bit but the updated graphic driver causes my both screens (monitor - MiniDisplayPort and TV - HDMI) to go black, and eventually computer restarts or freezes.
I did some checks reinstalled whole windows, narrowed search to graphisc drivers and can confirm that up to BootCamp version 3.3 (nvidia ver. 19x.x) everything is fine but drivers from Boot Camp 4.0 (nvidia ver. 26x.x) simply render Windows 7 in 64-bit variant useless.
I look forward to some sort of solution or update from Apple as soon as poddible...!!

Boot camp drivers won't download

I have Lion installed with no problems. When I finally decided I needed a windows partition on 2011 MackBook Pro, bootcamp assistant returns - after 45 minutes - a message that states that windows compatibility software cannot be installed

I am having the exact same problem.
MacBook Air 13" August 2011 - delivered w/ Lion installed.
Using Bootcamp Assistant to try to download Windows Support Software. Task Status shows the download began and it very, very slowly progressed to about 25-30% and seems to hang.
I have been unable to find an alternative means to download the drivers. The new MBAirs, of course, do not come w/ DVDs nor the USB stick - so I have no alternative driver sources available other than web download.

Mid-2010 Mac Mini - black screen after installing boot camp drivers

I successfully installed Windows XP Service Pack 2 on my new Mac Mini. The display worked without issue in XP at this point.
After doing this, I proceeded to install the boot camp drivers. They installed and automatically rebooted the machine.
After reboot, Windows XP no longer has a functioning display. The display is a black screen and eventually the monitor shuts off.
Things I've tried:
- Reset PRAM
- Reset SMC
- Tried both Mini DisplayPort and HDMI connections to connect to the HDMI port on the monitor
- Booting into Safe Mode. Holding down F8 successfully brought up the Safe Mode options, but again the display was blank after choosing the Safe Mode option and attempting to load Windows.
Message was edited by: mullingitover

Update: Other stuff I've now tried--
- Swapping out RAM modules. I've tried it with the stock 2GB sticks in place, also with a single 4GB stick. Same result.
Other interesting/troubling problems:
- Unable to boot into Safe Mode with command line. The text-only interface with safe mode options that is reached by pressing F8 during windows startup is displayed. However, no matter which option I choose, the result is a dead display.
- Unable to boot with Windows XP install CD (?!). After choosing the CD at the boot selection screen, the display blanks and never wakes up.

2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!

Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

Windows 7 Freezes at Restart After Installing Boot Camp Drivers

Hi,
I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
Is anyone else having this problem? Any ideas or workarounds?

I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work.

Can't Install Boot Camp Drivers

I installed Windows Xp Professional SP2 on my Laptop, but I lost my Leopard install disc that came with my MacBook Pro, and therefore i cannot install the Boot Camp drivers on my Windows Partition.
Is there any way to get a different copy of the .exe file that contains the Drivers? I need them in order to be able to connect to the internet and to get sound? Does anybody know?
Thank You.

Hi and welcome to Discussion,
Apple provides the BootCamp Drivers only on the Leopard OSX DVD.
The download of the BC Update 2.1 will only install if you have installed the BC Drivers from the Leopard DVD (which are version 2.0).
Since the OSX DVD is also necessary for certain maintenance tasks in OSX, like repairing your OSX volume for example, you really should call Apple, provide them with the serial number of your Mac and ask them to send you a replacement disc.
Usually they do this but are charging something like 30 USD for it.
Regards
Stefan

Installed XP; Boot Camp drivers won't work.

Similar Messages

Maybe you are looking for