Installed Yosemite on I mac fixed Java with Apple patch Photoshop works on MacBook Air but not on iMac
I called Apple but they said call Adobe. How do you call Adobe with a problem?
I use Photoshop 5.1
The error message is
An unexpected and unrecoverable problem has occurred Photoshop will now exit.
Similar Messages
-
I recently took my 27 in I Mac to Peach Mac for service for a flashing green screen. It comes up when I log in. They said it was not a hardware issue but a software issue and want to charge me 99.00 to re-install it. WiIll mac come out with a patch for OS x for this? Is this worth it?
Having a similar issue with my MacBook Pro w/Retina 2012.
I did the reinstall my self and incrementally did the updates by downloading them from Apple's website instead of using the App Store.
I found that the problem occured after updating to OS X 10.9.3.
The issue is in a 4k resolution update for mirroring displays. Not that you should be doing that from an iMac but your packaged update may have been similar even though the update was meant for 2013 MacBook Pro's.
You can try reseting the Nvram chip during boot up by pressing "Option + P + R" keys. You may have to do this after entering your password to log in if you have that set up on your computer. However this only works on certain models of Mac hardware and may not do anything at all.
After you get your second opinion from Apple, if they again confirm it's a software issue, then you should reinstall OS X Mavericks and download updates from the website instead of the app store. This way you control your updates. You will find the OS X 10.9.2 update as well as a seperate security update prior to the released update of the dreaded OS X 10.9.3
Again if you don't want the issue to occur again, then hold off on updating to OS X 10.9.3, but be cautioned that you do so at the risk of leaving your computer less secured even though it will seem to run better. -
Should I install the Kaspersky Internet Software included free with the purchase of a new MacBook Air OS X?
Welcome to the Apple Support Communities
You mustn't. Apart from the fact that OS X doesn't need an antivirus (OS X has got its own security systems), commercial antiviruses like Kaspersky can do more harm than something good for your Mac. See > http://www.reedcorner.net/mmg
If you want to install an antivirus, install Sophos or ClamXav -
Photo stream on my pc with windows 8 upload to my macbook (iphoto) but not to my ios devices.
Photo stream on my pc with windows 8 upload to my macbook (iPhoto) but not to my ios devices. On the other hand, and that is the funny thing, the shared picture folder on the pc is updated with new photos/pictures from my ios devices and from my macbook. Anyone has any idea of what is the problem? This drives me crazy because i can't upload a picture manually from the PC. Hopefully anybody have an answer. Thanks in advance.
Hi Naddod , I have the same problem. The same pc photostream receives new photos added using the photostream "add picture" button but ipad and iphone does not. If I take new photo from Iphone I can find it in Photostream of PC, Iphone and Ipad. Seems IOS error. Strange thing is that , if then I erase that new photo from the PC photostream, than it will be erased from photostream of PC, iPhone and iPad, erasing works, adding not.
-
USB Card reader works on MacBook Pro but not Mac Pro
I have a random "All-in-1" card reader from Quantaray. I'm trying to mount my CF card because it takes forever and a day to import HD video directly from my Canon 5D Mk II.
It works on my MacBook Pro (Mid 2010). Both computers are running 10.6.8. All I have to do is plug it in and it appears on the desktop on my Macbook. But not on my Mac Pro.
I've already tried resetting the PRAM and SMC. No dice
It shows up in the System Profiler under the USB High Speed port as a usb card reader but I can't find it anywhere; not even in Disk Utility.
Any ideas?
Thanksjaypie77,
First, you must identify the application that created the file. If it truly was Macromedia Flash, fine. Once you know which app created the file, make certain that the same application exists on the Mac Pro. If it does, set the file to open in that application: Open a Getinfo window for the file, then use the "Open With..." dialogue to choose Macromedia Flash (or the correct application) to open the file.
Scott -
Thumb drive works on MacBook Pro but not on Mac desk top
I have bought two separate thumb drives that are MAC/PC compatible. They will work on my MacBook Pro but not my desk top Mac. Both are less than a year old. Desk top will read older thumb drives w/o problems, but not the new ones.
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i5
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Serial Number (system): QP05*****NR
Hardware UUID: 282E0143-F041-56A4-8A82-C*****A59
Is there anything else you need to trouble shoot this?
Melissa
<Edited by Host> -
It also says I need 8 GB of RAM and I only have 4 GB. How do I get more and how much would I need to buy? I know nothing about Cloud either.
Well, I'll try and answer. The upgrade to Yosemite more than likely broke the older software. I don't know much about Phototools and what OS it was meant to operate on, but you will have to discuss that with OnOne,
You have a choice to upgrade to CS6 from CS5 for $200 or pay $10 monthly for the Lightroom and Photoshop | Adobe Creative Cloud Photography Plan
But of course look at the System requirements | Photoshop
You usually can open up your Mac and add memory. Check with Apple Mac Memory Upgrades From OWC. Easy Guides & Free Install Videos.
8 to16 GB is pretty common these days, get as much as you can.
Gene -
I'm trying to install Microsoft Office for Mac 2011. Halfway through the installation, the MacBook Air tells me that I must close Safari for the installation to continue. As far as I can tell, Safari IS closed. I can't discover any process that will close it any more than it is now. Installer won't let me shut down or re-start the computer because it (Installer) is still running.
What am I missing?The MS installer seems to think Safari is active so try the following...
Right-click on the Safari icon in the Dock and if applicable, select Quit.
or
Try Utilities > Activity Monitor and look for Safari in the Process Name column. If present, highlight Safari and then click the Quit Process icon. -
.osx file extension works on MacBook Pro but not Mac Pro
So I have a file that was created, I believe in Macromedia Flash (not certain) but it has a .osx extension on it. It works just fine on my MacBook Pro, but won't work on a Mac Pro. Both have Leopard, both have most of the same software on them... Can anybody offer any help?
jaypie77,
First, you must identify the application that created the file. If it truly was Macromedia Flash, fine. Once you know which app created the file, make certain that the same application exists on the Mac Pro. If it does, set the file to open in that application: Open a Getinfo window for the file, then use the "Open With..." dialogue to choose Macromedia Flash (or the correct application) to open the file.
Scott -
Implicit read with assembly module instance working on one computer, but not another
Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related? -
Grey screen with apple at start up on macbook pro but can play music ?
hi, i have my macbook pro not working properly, it start up but the grey screen with apple stay here and i can listen my music with the play touch. how i can shut it down with my keyboard witout make a force shut down.
thankshi, i have my macbook pro not working properly, it start up but the grey screen with apple stay here and i can listen my music with the play touch. how i can shut it down with my keyboard witout make a force shut down.
thanks -
My WD My Passport SE USB 3.0 works with MacBook Pro but NOT new iMAC?
The drive works fine on my MacBook and I can see it from the iMAC when I share it. but the iMac will not recognise it, nothing in Disk Utility, when plugged directly in.
WD are unable to help as I don't believe there is a USB 3.0 Y cable in the UK and the latest firmware, which supposedly fixes a 'read with Lion OS' issue, does not make a difference.
Any helps????
Thanks
PaulI've done dwb's suggestion #3, removing the perfectly good WD bare drive from their perfectly bad enclosures and installing it in an enclosure from Other World Computing. Their enclosures always work; "name-brand" enclosures seem to be very troublesome.
The cheapest option after resetting the PRAM/NVRAM is to get a powered USB2 hub as in dwb's #2. The Passport must get all power from the computer's USB port and, if you have a lot of USB devices attached, there may not be enough power left to turn the drive. A powered USB hub has an independent power supply so devices attached to it are not competing for power.
Although I've not tried it, there are positive reports that using Disk Utility to reformat the drive for Macintosh (they are formatted for Windoze when they ship) made the drive behave without resorting to an enclosure or a powered hub. -
Why do I have no sound with Apple TV I get sound through hulu but not Netflix. Why.
I get audio on iPad through Netflix app I get audio on tv with Hulu plus. Nothing through Netflix nor airplay. How do I fix that?
if in the settings of the appletv
one choose surround rather then stereo without having a surround system connected
all is well when one play media which is not surround
but when one stumple across something which does then the stereo speakers one have connected play
front right and left and apart from action and the like most audio and talking is played out of the center speaker
which you would not have connected because you use stereo -
IT will stream photos and music and photostream (screensaver), but no mirroring, not even the icon??
Is the MackBook Air mid 2011 or newer? Only mid 2011 or newer Macs support AirPlay Mirroring. Read here for system requirements > http://support.apple.com/kb/HT5404
Hope that helps. -
I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still gives me the same mess
In the details it is mentioned that it is an outdated version of Java.
Is this a security risk that i need to live with to get CS5 to run with Yosemite?
Also i need to reject messages from Java in the future about updates, or not?
thx for any input
Maybe you are looking for
-
I am just starting to modify my workflow hardware to accommodate HD post production. I've been doing SD using a Canopus ADVC 100 to monitor footage while I'm editing in real-time. The ADVC 100 inputs from my Mac Pro via FW400 and outputs via standard
-
HT201301 I am having problem with Iphone5, it's show me iTunes & not working
I am having a problem with my iPhone 5. It told to there was a system update. When I clicked it the screen showed me to plug it in to itunes however when going to itunes and updating it the phone won't turn on.
-
Another 'Cannot mutate bound sequence' Question
Hi Everyone, The below code throws a "Cannot mutate bound sequence" when the line (id:'a') is pressed first. However it runs fine when lines 'b' or 'c' are pressed first. But the output shows the correct line 'a' has been deleted when pressed first.
-
Why since installed Lion on my IMac it happened many times that my computer freeze and I have to restart everything before something work again?
-
I have a Ipad2, my computer that contains all of my apps, music etc crashed and dosent work. I bought a new laptop, how do I retrieve that iTunes account and or apps, movies etc.