Installer for ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip

Hi All,
I have been trying to figure out the location from where i can download ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip but I am not able to find it in the Oracle Site, nor in the oracle EDelivery, nor the metalink support. Can some-one please help me here.
regards,
Vishal

Login to oracle.com
http://www.oracle.com/technetwork/middleware/service-bus/downloads/index.html
Then open a new browser and put the below link to download ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip
http://download.oracle.com/otn/nt/middleware/11g/111150/ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip
Thanks,
Vijay

Similar Messages

How Can I Get the FULL Installer for Flash Player 11.1.102.63?

When I try the "Download now" button at http://get.adobe.com/flashplayer/, I only get a stub installer that then requires downloading the remainder of the installer. I maintain both my own PC and my wife's PC. I want to install Flash Player 11.1.102.63 twice but download it only once.
When I instead try the link for "Flash Player for other browsers" under "Windows 32-bit", I get the full installer for Flash Player 11.1.102.62, not the full installer for Flash Player 11.1.102.63.
The latest version of Adobe Reader is available via FTP at ftp.adobe.com. Why cannot the latest version of Flash Player also be available there?

at http://forums.adobe.com/thread/889580 the link for downloading "flash player 10", "for other browsers", still results in the OLD version of FP 10 being downloaded, not the newly updated version, build 10.3.183.16..
in adobe's security bulletins, it says that you can download the updated versions of "flash player 10" on the "archives" webpage but there are no direct downloads for FP 10 on the webpage, except for downloading the zipped packages, with the "debuggers".. it would be good if there were direct downloads for the updated versions of FP 10..
also, when i go to the "download center" page, http://get.adobe.com/flashplayer/?promoid=BUIGP , if i go there with "firefox 3.6", it recognizes that i am running "firefox 3.6" and offers to install "flash player 10.3", but if i go there with "internet explorer 6", it is not recognized and so i am not offered "flash player 10.3", for installing.. in this situation, i need some other way to get "flash player 10.3" for "internet explorer 6"..
adobe should make things easier for everyone by providing direct downloads for flash player..in my case, i use "flash player 10", so i need direct downloads for it.. yes, it is nice that the downloads are posted in the forum, but why not do it right and have in on some webpage, like on the "archives" webpage where adobe says that "flash player 10" can be downloaded, except that there are no links there for downloading it..

Bad installer for 'Flash Player 11.7.700.261' released on 2/4/2014?

Hi, where can we get a good installer for Flash Player 11.7.700.261? It seems like the one available at this link is a bad one: http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html#main_Archived_F lash_Player_versions_for_developers. After you download it, you will get an error when you try to unzip it.
-- Team OCD.

I just downloaded fp_11.7.700.261_archive.zip and unzipped it with no problems.
The file size should be 143,718 KB (147,166,947 bytes); if you have anything else, then you got a corrupted download.
If you need an alternate download, tell us exactly what installers you need.

Need Agent Installer for Solaris (SPARC)

Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
Sumathi

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Multiple language installer for Adobe Reader

I need a compressed multiple language installer for Adobe Reader to install with my software. Is one available?

When we requested a license to distribute the multi-language version of Adobe Reader with our software, we recieved the following link to a download:
"For full installers: "
"To download the English language version of Adobe Reader 9 with Acrobat.com in compressed .exe format, click here."
When you click on the link, you get a single file (AdbeRdr11006_en_US.exe). This is an installation for english only. I am looking for a single .exe file for a multi-language installation.
The link you provided above is to a .zip file that must be extracted and then run. This requires additional steps in our installation process. We were hoping you have a single installation file to prevent these additional steps.

Where is the 11.2.0.3 XE installer for Linux 64 bits

I can't find the 11.2.0.3 XE installer for Linux 64 bits.
When I open the Oracle Website is http://www.oracle.com/technetwork/products/express-edition/downloads/index.html
I get a file named oracle-xe-11.2.0-1.0.x86_64.rpm.zip
Please help me find it.

Current/latest XE is 11.2.01.
Small correction, it's 11.2.0.2 :
$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Mar Giu 18 10:26:31 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
SQL>

Voices Installer for Captivate 7

I just downloaded the voices installer for Adobe Captivate. But every time I click the zipped folder, it gives the message "The compressed zipped folder is invalid".
Please advise where to the download the valid voices installer from?

Hi Rick,
It may not be unusual for the download to fail or file get corrupted.....but the actual point in question here is that how come a company like 'Adobe' cannot fix such glictches or for that matter, with all the brilliant software experts working for them, they have overlooked such bugs.
It took nearly 12 hours for the file to download and right in the last minutes of the downloading....... the error comes up showing that the file is 'Invalid'. (A file downloaded from the Adobe website is Invalid.......how ridiculous is that)
Though this may not seem like a big problem to Adobe, but the fact is....... this is a big problem for Adobe, for such instances only push people to resort to piracy or go after other options.
I appreciate your trying to help me Rick, but my problem is still where it was....I cannot afford a faster connection at the moment, but then again, there is no guarantee that after wasting another 12 hours the downloaded file will be even be valid or not.

Windows could not load installer for daqdevice

Hello, I have 2 Labpc-1200 Daq cards installed in my Windows 200 SP4 pc. When i load NI-Daq6.9.3 and reboot, i get the following error
"Windows could not load installer for DaqDevice"
I have search the forums and support here withough luck. Here is what i have tried :
Removed all daq, labview software - rebooted reinstalled
removed all registry keys, hklm\software\niationa intruments
Updated pc to SP4
Anyone got any ideas please?

Hi Finto
I have attached a word document and a zip file the word document is a procedure for removing all NI soft ware I know you said you have done this but just to check you haven’t mist anything.
Is there any reason why you are using NI-Daq6.9.3?
There is a link in the attachments for the latest drivers which I would suggest you use them. The latest drivers for Traditional NI DAQ Legacy is 7.4.1 and the latest for DAQmx is 8.
Tim
NIUK AE
Attachments:
msicuu.zip ‏481 KB
remove National Instrument Software.doc ‏25 KB

Where do I find the installer for AAMEE 3.0 for the Creative Cloud?

I try to setup a local Adobe Update Server. I've seen the video online on Adobe TV, but I don't find the actual installer file called AAMEE 3.0...

Hi wieneke,
You can find the installer for AAMEE3.0 at : http://blogs.adobe.com/oobe/2012/05/aamee-3-0-for-cs6-available-now-removes-puffer-fishes. html
The link is : http://download.macromedia.com/pub/developer/creativesuite/AAMEE/win/ApplicationManagerEnt erprise_3_0_all.exe
Regards,
Rave

Error in Plugin Installation For MS Office 2013 on Windows 8 and 8.1

Hello,
We have developed an installer for MS Word and MS Excel plugins. So far it has been working fine for MS Office 2003, 2007 etc. but since I have upgraded to a Windows 8.1 machine with MS Office 2013 installed, the plugin installation is giving error.
The installation fails and an error dialog appears with Error Code Type: Error, Error:1, Owner:30a.
The installer works well for MS Office 2010 on Windows 8/ 8.1 machine or MS Office 2010 on Windows 7 machine.

HiDinesh,
Is there any other error message when installation fails?
According to this error message “Error Code Type: Error, Error:1, Owner:30a.”
This is problem conclusion provided by IBM:
This issue is no longer reproducible in V6R2012x.
Installation checks have been modified to throw an error only when none of the Office applications
(Word, Excel, PowerPoint and Outlook) are installed. This error will not occur if one or more of the Office products are installed.
For more detail information:
http://www-01.ibm.com/support/docview.wss?uid=swg1HE09464
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If there is anything I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created? I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS). I was wondering if there is any way to create an installer? I think there probably isn't... If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
Thanks so much for your time.

I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How do I create an installer for my project that allows for variable data entry like a server unc path?

Hello All,
I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer.
Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a text box or something where I can enter a server path as a string. Basically my application needs to know where to look
for a server unc path \\server\somesharedfolder that it will be accessing primarily for its work. Secondly, how do I reference said information from within my code.
I have come across application/user scoped settings, which appears to be what I'm looking for. However I can't find a way to have the installer prompt for a value "Server Path:" __________ that I could type into during installation. So far it appears
the only way would be to edit the config.deploy file before running the installer, which isn't a big deal but you'd think there'd be an easy way to take in variables during install.
EDIT: Apparently I can't edit the config.deploy file as I get an error message about the hash not matching.
Thanks for your help!
Lance

Hello,
The forums I found confusing, didn't know the best place to put this question so I put it here.
I have found the answer over at stackoverflow and will detail here for anyone who may stumble across the same problem.
The problem is ClickOnce seemingly doesn't support this feature. Installshield LE either doesn't or does but its incredibly too complicated if all you need is one variable passed to the registry during installation. And it seems the words used for googling
this particular problem will never lead you to the solution.
So here's how to do it (we will be first adding the Visual Studio Installer Add-on to restore original installer project functionality):
1) Inside of visual studio 2013 go to Tools -> Extensions and Updates
2) On the left-hand side click on Online -> Visual Studio Gallery
3) In the upper-right search box search for "Visual Studio Installer"
4) Download the extension labeled "Microsoft Visual Studio Installer Projects"
5) Install, then open a new project under Templates -> Other Project Templates -> Visual Studio Installer -> Setup Project
6) Now for the gold. In the solution explorer there are icons in a bar just below its title bar, highlight till you see "User Interface Setup" and open it.
7) Now you can right click on Start, Progress, End etc any Category heading and hit Add Dialog.
8) From here for my purposes, I used TextBoxes A
9) Once you add it, click on it and observe its properties window. You will see Label, Property, and Value. Make a note of the property name as it will be used to store the data directly into the registry. *Note: there appears to be no way to perform data
validation using the built in textbox dialogs, users can enter whatever they want and move on.
10) Go to the registry editor on the same icon bar under solution explorer.
11) Specify your registry folder, make a new value (I used string) and name it whatever you like. In the value section enter the property label formatted as such [EDITA1] depending on your value.
12) Now when you run the installer for your project, it will take data into that field and place it into the registry provided it has access to that key with the permissions you run the program under.

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

11.2.0.2 Grid Installation for a Standalone Server FAILED!

OS: OEL-5.5 x86_64 (kernel-2.6.18-194.17.4.0.1.el5, glibc-2.5-49.el5_5.7)
Product: Oracle 11gR2 (11.2.0.2.0) x86_64 for Linux
Hi,
I was trying to perform a clean and full 11.2.0.2 installation for a Standalone Server (Single database + ASM + Restart), but unlike 11.2.0.1, this standalone patch, shipped as set of full installation files, has serious flaws mainly due to insane installation and configuration scripts. My environment is as follows:
ORACLE_BASE=/opt/oracle
ORACLE_HOME=/opt/oracle/product/11.2.0/db_1
GRID_HOME=/opt/oracle/product/11.2.0/grid
all owned by oracle:dba. ASMLib was configured with four 256 GB partitions on four physical disks.
1. During grid installation the Prepare, Copy files, Link binaries, Setup files, Execute Root Scripts (root.sh), Update Inventory, Oracle Net Configuration Assistant all succeeded, but ASM Configuration Assistant FAILED and installation couldn't continue. That was because root.sh script (and inside it calling scripts) changed the ownership of ORACLE_BASE and GRID_HOME to root:dba, so that admin and diag directories creations in ORACLE_BASE were not permitted. After fixing that manually as root (immediately after executing root.sh), the installation continues and succeeds.
2. During installation of Client software the error message window appears stating that cannot find the /opt/oracle/product/11.2.0/db_1/oui/bin/runInstaller.var file. By pressing the Continue button the installation continues ignoring this.
3. If Oracle Scheduler Agent is selected for installation during Client software installation, the Oracle Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot start (https problem - cannot establish connection). To fix this, I had to deinstall Client software and install it again without Oracle Scheduler Agent.
4. The Performance window in Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot display any graph ("Initializing" and "Transferring data from localhost..." never end).
Are those issues known issues? If they are, why did Oracle ship that standalone patch without testing it before? Given that prior release (11.2.0.1) was free of any errors above, it is really beyond me to figure out this negligence.
NJ

Are those issues known issues? Have you created service request ? That would be much better to be sure about the workaround you found.
Nicolas.

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

Installer for ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip

Similar Messages

Maybe you are looking for