Installer: Installation requires Windows XP

Hi,
when creating an installer with Win XP and LV 2009, I can check the box for requirements: Win 2000 or higher.
But, when trying to run the setup.exe on a Win 2000 system, the error message: This installation requires Windows XP pops up.
Any help?
Thx in advance,
Thomas
Solved!
Go to Solution.

You should make a verbose log, and test my last tip (also combined with my first tip) here http://forums.ni.com/t5/LabVIEW/Win2000/m-p/1238020#M524213 I do not have any Win2000 systems any more so I can not test it. I suspect it is the installer system itself that require windows XP
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Similar Messages

Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005

Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
Last Update 3 Oct 2006
Important Notes Before You Start:
1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
6- Disclaimer of liability
I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
Steps:
1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
"If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
A- Q896256
FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
B-Q910437
FIX "High Hit Count Watson Crash In Wu Client"
C-Q889673
FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
FIX "ADD Support The High Speed SD Card"
Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
(Restart Your PC After You Finish The Installation)
Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
Atheros Client Utility " No Need"
Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
Enjoy Your Powerful Toshiba Qosmio Laptop.

you can see this tutorial also in this website
salah.coms.ph

64bit weblogic server installation on windows

Hi,
We are trying to install 64bit Oracle weblogic Server 10.3.2 on windows 2007 Server. As per the documentation, The installation requires 64bit java installation and then execute the wl_1032_server.jar file.
We installed weblogic Server successfully and did not find any errors while installing the weblogic server. We created one Managed Server with the default options. We are able to start the Admin Server with out any problems.
But we are unable to start the managed weblogic server and we are getting the following error message while starting the managed webserver.
I have also tried with setting the following memory args also. But I am getting the same error in the managedserver log files.
set MEM_ARGS=-Xms512m -Mmx1024m -MaxPermSize=512m
<Feb 19, 2010 11:57:01 PM EST> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "new_ManagedServer_1" for domain "base_domain" running in Production Mode>
Exception in thread "[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space
The WebLogic Server encountered a critical failure
Reason: PermGen space
Exception in thread "main" java.lang.OutOfMemoryError: PermGen space
<Feb 19, 2010 11:57:10 PM> <FINEST> <NodeManager> <Waiting for the process to die: 1848>
Can you please help us in configuring the 64bit weblogic server. Do we need to make any special configurations.
Thanks and Regards,
S R Prasad

Thanks,
You are right and I've found a documentation below. Did you checked your Environment Variables or try to use full path of 64 bit Java installation?
How do I select between 32 and 64-bit operation? What's the default? The options -d32 and -d64 have been added to the Java launcher to specify whether the program is to be run in a 32 or 64-bit environment. On Solaris these correspond to the ILP32 and LP64 data models, respectively. Since Solaris has both a 32 and 64-bit J2SE implementation contained within the same installation of Java, you can specify either version. If neither -d32 nor -d64 is specified, the default is to run in a 32-bit environment.
Other Java commands (javac, javadoc, etc.) will rarely need to be executed in a 64-bit environment. However, the -d32/-d64 options may be passed to these commands and then on to the Java launcher using the established -J prefix option (eg: -J-d64).
All other platforms (Windows and Linux) contain separate 32 and 64-bit installation packages. If both packages are installed on a system, you select one or the other by adding the appropriate "bin" directory to your path. For consistency, the Java implementations on Linux accept the -d64 option.
Regards,
Kadir

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Help on Oracle 11gR2 (ver 11.2) installation requirement

Dear Experts,
I need help from you on Oracle DB11gR2 (ver 11.2) server installation in windows 7 32-bit architecture.
I have downloaded Oracle 11gR2 DB (32-bit) from edelivery.oracle.com site.
When the installtion is done i am getting below error, can any one please help me what are the memeory (RAM) and stored (HDD space) require to installed oracle 11g DB server
Error: System Physical memory not suffiicient
I have 2 GB RAM 500 HDD with windows 32-bit OS installed.
Note: i have increase 3 time of My RAM size memory at system virtual memory, if any body have installtion steps or screen shot document
Waiting for valiable help
Regards,
phanikanth

The minimum requirements are in the installation guide:
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDGJEJE
You need at least 1GB RAM for the database server, is it possible the OS and/or other applications already occupy more than 1GB, so you don't have enough memory for Oracle?

Steps For Oracle10gR2 RAC installation on windows 2003 enteprise edition

can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN

Hi,
Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
Check: System architecture
Node Name Available Required Comment
rac11 unknown 32-bit failed
rac22 unknown 32-bit failed
Result: System architecture check failed.
Can anyone throw more light to resolve this issue.
Note that i have successfully does this on Windows 2003.
Any help will be highly appreciable.
Thanks
Nilanjan

Digital Editions 4.0 will not open after installation on Windows XP laptop.

Digital Editions 4.0 will not open after installation on Windows XP laptop. DigitalEditions 3.0 installs and opens fine. Have tried 4.0 several times. Removed 3.0 and 4.0, reboot, reinstall 4.0 still will not open. Error message says Windows has experienced and problem and requires that Digital Editions must be shut down.

Solved my own problem. It was necessary to delete all instances of Adobe Digital Editions in programs and the registry. After doing so and reinstalling 4.02...., it became available in the "open with" dialogue box and became the default epub reader.

Where can I find the iTunes installer for Windows XP 64 bit?

I am using windows XP SP3, 64 bit but cant find the iTunes 10.5 installer for the same? The iTunes64Setup.exe says that its only supported for Vista. Any way to get this working?
Appreciate the help.
-Prabhat

I wonder if you can use the regular 32-bit installer. Even on 64-bit machines the iTunes application is still 32-bit so there is no real difference in what gets installed.
System requirements:
Windows Software
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, or 32-bit editions of Windows 7
64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer
Note it doesn't make a distinction between 32-bit and 64-bit versions of XP, simply states SP2 or later.
tt2

Installer requires Admin Privilege to run

I'm a new user on a Macbook. Its been about 20 years since I last was on an apple. I need help, I'm trying ton install a game on my laptop. When I click on the installer to install the game a window pops up saying "installer requires Admin privilege to run" and the only option is to quit. What do I need to do to get this game installed?
Thanks so much!!

/Applications/Utilities/Disc Utility - a very handy tool in all sorts of situations.
I'm most surprised that a new account with admin permissions wasn't able to perform the install I'm at a loss what might be causing that to be honest ... maybe the repair permissions on the drive will sort it out, perhaps the entire folder has had write access removed somehow. You could select the destination folder location and Get Info on it and look at the permissions settings at the bottom, does it allow any user to Write there or is it Read only I wonder ?

What installation of windows for powerfull 3D modelling and rendering.

Hi everybody.
I need a config to use windows in a very compatible, easy to use and powerfull way. No simple bootcamp installation as I will be rebooting all the time, between mac apps , Adobe CS (OSX) and Rendering Software (Shot/Bunkspeed -windows).
So what installation of windows should I have? Virtual Computing or Virtualization? and what Software for everything to go fast enough?
Then What hardware should I have for everything to run well? Any special requirement?
Thanks for the answers.

I would have posted in Mac Pro forum. Why do you say "simple bootcamp" as actually a VM is much easier and less fuss but will never live up to what you need.
A VM will NEVER be as fast or as well as running natively, especially with 3D or anything hardware resource intense.
Maybe time to build a PC or switch CS5 to Windows (it does have some advantages though CS5 caught up some) but to use CUDA you would need the only nVidia Apple sells probably.
Run OS X off a RAID.
Put your VM on its own drive or array.
Normally I would say CS5 etc then the Quadro 4000 would be ideal as 2nd video card.
Most people install Windows natively first on its own partition, what Apple calls "Boot Camp" but overuses the term, so that they can dual boot; then, install Parallels or Fusion so that they can use Windows as a guest OS under Mac OS when they don't need full access to all the RAM, more cores, and direct access to graphics.
Easy to use to me, Windows 7 or OS X, both are fine, though Windows on Mac has some limitations.
People have run multiple VMs on Mac Pro and find performance to be good thanks to dual processor, plenty of RAM and multiple fast hard drives.
I would install Windows on its own hard drive first, Windows 7 Pro 64-bit (System Builder is fine but you need Pro to use more RAM and dual processors).
http://discussions.apple.com/forum.jspa?forumID=1320

Why do i get a "codec installation required" message?

Why do i get a "codec installation required" message when trying to play avi files? Im using QT7 on a mac, v10.6.7?, Why do i get a "codec installation required" message when trying to play avi files? Im using QT7 on a mac, v10.6.7?

Why do i get a "codec installation required" message when trying to play avi files?
Probably because you do not have an audio and/or video codec used for compressing/decompressing data in the AVI file. AVI, like MOV, are just file containers capable of holding many different kinds of data. The originator of the AVI file (Microsoft) dropped its official support of this file type more than a decade ago but its popularity with Windows users lingers on. Unfortunately, with few exceptions, the compression formats commonly used in the AVI file container may or may not still be in use. Some were never transcoded for use on the Mac platform. Others are so old that they have never been updated for use under OS X. Of thise transcoded for OS X use, some have not been updated for Intel based platforms. Thus, while QT supports the container itself, it does not natively support the third-party and/or proprietary codecs used, many of which, are now classed as "legacy" codecs and are out of date in terms of today's video compression technology.

Exchange 2013 management tools installation on windows 2012 standard edition gives error.

Exchange 2013 management tools installation on windows 2012 standard edition gives following error.
Does anyone observed this issue ?
Error:
The Exchange management tools are supported on servers running Windows Server 2012 and Windows Server 2008 R2 SP1 or later, and also on Windows 8 and Windows 7 client computers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersionForAdminTools.aspx
My Test lab is having
Exchange 2013 installed (xyz.local) domain and working fine.
Now i am installing Exchange Management tools on server which is member of (xyz.local) Domain (base OS : Windows 2012 standard edition : Windows updated)
Best Regards
sameer Prabhune

Hi Sprabhune,
It should work.
Did you install the tool by GUI or cmd?
Please select "Automatically install Windows Server roles and features that are required to install Exchange Server" to have the Setup wizard install required Windows prerequisites.
If possible, please try to install the tool on Windows 7/8 client to test.
Exchange 2013 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354.aspx
Frank Wang
TechNet Community Support

Satellite L300 - Perform a repair installation of Windows Vista

Hi,
I have a Satellite L300. I have NO dvd of windows vista, the seller says me that the dvd of windows is inside the pc.
Now I have to resolve an windows update issue (80073712 - kb 971644) and in this link http://support.microsoft.com/kb/957310/en-us I don't know how execute the steps of method 3 because i have no dvd of vista.
Can you help me???
*Method 3: Perform a repair installation of Windows Vista*
*When you perform a repair installation, this restores the current Windows Vista installation to the version on the installation DVD. This requires you to reinstall all updates that are not included in that version of Windows Vista.*
*To perform a repair installation of Windows Vista, follow these steps:*
*Restart the computer.*
*Insert the Windows Vista DVD in the computer's DVD drive.*
*Note If Windows does not automatically detect the DVD, click Start, type <Drive>:\setup.exe in the Search box, and then click Setup in the programs list. Then, click Install Now.*
*Click Go online to obtain the latest updates for installation (recommended).*
*Insert the product key if you are prompted for it.*
*Click to accept the Microsoft Software License Terms.*
*On the Which type of installation to you want screen, click Upgrade.*
*When the installation is complete, restart the computer, and then try to install updates again.*

Hi fardei,
If you use the HDD recovery to reinstall Windows, your whole computer will not be formatted. Only the first partition will be deleted and thats all. Check the Toshiba document how the HDD recovery option works.
Using the Toshiba recovery disk creator tool allows you to create a recovery disk. Normally on the first start up where you purchased the notebook, you did get the following message:
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+

MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA the computer is bloked od it is restart.This problem I solved when I put another processor INTEL 541(3,2GHz/800/1MB) whit this processor everthing is ok,but with INTEL 940 it can not be install WINDOWS VISTA .
I’m asking you for a new superstructure on bios update .

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Installer: Installation requires Windows XP

Similar Messages

Maybe you are looking for